In recent years, printed electronics reached enormous popularity as a result of their huge potential to offer unique features that are not attainable through traditional fabrication, namely low‐cost production, multifunctionality, stretchability, sustainability, and flexibility. Being expected a galloping increase in the use of printed technologies in the near future, due to the digitalization efforts associated with the Internet of Things and the 4.0 revolution, it is timely and desirable to discuss the joint features, the interrelations, the complementarities, the interdependency, and the most demanding challenges linked to the relation between printed technologies and electronic materials. In this context, this study offers a broad review of the numerous printing technologies used in the processing of electronics, commonly used substrates, the most effective printed electronic materials, and the key post‐printing treatments such as sintering. Disruptive challenges in various printing techniques, (un)expected future research directions of printed electronics, and imminent application trends are also highlighted, following a critical and subjective perspective.
Recording electrical muscle activity using a dense matrix of detection points (high-density electromyography, EMG) is of interest in a range of different applications, from human-machine interfacing to rehabilitation and clinical assessment. The wider application of high-density EMG is, however, limited as the clinical interfaces are not convenient for practical use (e.g., require conductive gel/cream). In the present study, we describe a novel dry electrode (TEX) in which the matrix of sensing pads is screen printed on textile and then coated with a soft polymer to ensure good skin-electrode contact. To benchmark the novel solution, an identical electrode was produced using state-of-the-art technology (polyethylene terephthalate with hydrogel, PET) and a process that ensured a high-quality sample. The two electrodes were then compared in terms of signal quality as well as functional application. The tests showed that the signals collected using PET and TEX were characterised by similar spectra, magnitude, spatial distribution and signal-to-noise ratio. The electrodes were used by seven healthy subjects and an amputee participant to recognise seven hand gestures, leading to similar performance during offline analysis and online control. The comprehensive assessment, therefore, demonstrated that the proposed textile interface is an attractive solution for practical applications.
10 August 2022 in Journal of Materials Chemistry B
Cardiac tissue regeneration strategies are increasingly taking advantage of electroactive scaffolds to actively recreate the tissue microenvironment. In this context, this work reports on advanced materials based on two different ionic liquids (ILs), 2-hydroxyethyl-trimethylammonium dihydrogen phosphate ([Ch][DHP]) and choline bis(trifluoromethylsulfonyl)imide ([Ch][TFSI]), combined with poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) for the development of ionic electroactive IL/polymer hybrid materials for cardiac tissue engineering (TE). The morphological, physico-chemical, thermal and electrical properties of the hybrid materials, as well as their potential use as scaffolds for cardiac TE applications, were evaluated. Besides inducing changes in surface topography, roughness and wettability of the composites, the incorporation of [Ch][DHP] and [Ch][TFSI] leads to the increase in surface (σsurface) and volume (σvolume) electrical conductivities. Furthermore, washing the hybrid samples with phosphate-buffered saline solution strongly decreases the σsurface, whereas σsurface and σvolume of the composites remain almost unaltered after exposure to ultraviolet sterilization treatment. Additionally, it is verified that the incorporation of IL influences the P(VDF-TrFE) microstructure and crystallization process, acting as a defect during its crystallization. Cytotoxicity assays revealed that hybrid films based on [Ch][DHP] alone are not cytotoxic. These films also support H9c2 myoblast cell adhesion and proliferation, demonstrating their suitability for cardiac TE strategies based on electroactive microenvironments.
This work reports on tailoring the magnetic properties of acrylonitrile butadiene styrene (ABS)-based composites for their application in magnetoactive systems, such as magnetic sensors and actuators. The magnetic properties of the composites are provided by the inclusion of varying permalloy (Py—Ni75Fe20Mo5) nanoparticle content within the ABS matrix. Composites with Py nanoparticle content up to 80 wt% were prepared and their morphological, mechanical, thermal, dielectric and magnetic properties were evaluated. It was found that ABS shows the capability to include high loads of the filler without negatively influencing its thermal and mechanical properties. In fact, the thermal properties of the ABS matrix are basically unaltered with the inclusion of the Py nanoparticles, with the glass transition temperatures of pristine ABS and its composites remaining around 105 °C. The mechanical properties of the composites depend on filler content, with the Young’s modulus ranging from 1.16 GPa for the pristine ABS up to 1.98 GPa for the sample with 60 wt% filler content. Regarding the magnetic properties, the saturation magnetization of the composites increased linearly with increasing Py content up to a value of 50.9 emu/g for the samples with 80 wt% of Py content. A numerical model has been developed to support the findings about the magnetic behavior of the NP within the ABS. Overall, the slight improvement in the mechanical properties and the magnetic properties provides the ABS composites new possibilities for applications in magnetoactive systems, including magnetic sensors, actuators and magnetic field shielding.