Particle size and morphology analysis is a problem common to a wide range of applications, including additive manufacturing, geological and agricultural materials’ characterisation, food manufacturing and pharmaceuticals. Here, we review the use of microfocus X-ray computed tomography (X-ray CT) for particle analysis. We give an overview of different sample preparation methods, image processing protocols, the morphology parameters that can be determined, and types of materials that are suitable for analysis of particle sizes using X-ray CT. The main conclusion is that size and shape parameters can be determined for particles larger than approximately 2 to 3 m, given adequate resolution of the X-ray CT setup. Particles composed of high atomic number materials (Z > 40) require careful sample preparation to ensure X-ray transmission. Problems occur when particles with a broad range of sizes are closely packed together, or when particles are fused (sintered or cemented). The use of X-ray CT for particle size analysis promises to become increasingly widespread, offering measurements of size, shape, and porosity of large numbers of particles within one X-ray CT scan.
3 February 2023 in Journal of Geophysical Research: Earth Surface
Interpretation of unconsolidated Quaternary sedimentary core is difficult if key diagnostic features are obscured or not present, therefore traditional facies analysis is challenging. However, sediment texture remains a universal attribute which can be used to interpret sedimentary core. Here we present an automated classification workflow which implements Extreme Gradient Boosting and Bayesian Optimization of hyperparameters to differentiate estuarine sub‐depositional environments. We use 19 textural attributes, measured using laser particle size analysis of surface sediment samples from the Ravenglass Estuary, Cumbria, northwest England, to make unbiased classification of sub‐depositional environment and estuarine zone. Two predictive models created using the automated workflow are presented and evaluated using a suite of evaluation metrics, confusion matrices, and spatial analysis to understand their geological implications. Model 1 keeps all sub‐depositional environments discrete and has an overall accuracy of 68.96%. Model 2 merges related sub‐depositional environments to form inner‐coarse and outer‐estuary zones and has an overall accuracy of 84.14%. Both models have been applied to textural data obtained at 5 cm intervals from a Holocene core drilled through a tidal bar in the Ravenglass estuarine succession, NW England, to classify palaeo sub‐depositional environment. Predictive output of the models suggests that the core consistently experienced inner estuary deposition; all inner estuary environments are represented in the core. The workflow presented here could be applied to datasets from other marginal marine depositional systems to enhance the interpretation of their subsurface deposits. Ultimately, detailed interpretations of ancient, buried deposits could be made using models derived from analogous modern systems.
Reservoir quality prediction in deeply buried reservoirs represents a complex challenge to geoscientists. In sandstones, reservoir quality is determined by the extent of compaction and cementation during burial. During compaction, porosity is lost through the rearrangement and fracture of rigid grains and the deformation of ductile grains. During cementation, porosity is predominantly lost through the growth of quartz cement, although carbonate and clay mineral growth can be locally important. The degree of quartz cementation is influenced by the surface area of quartz available for overgrowth nucleation and thermal history. Clay grain coats can significantly reduce the surface area of quartz available for overgrowth nucleation, preventing extensive cementation. Using a coupled-effect compaction and cementation model, we have forward-modelled porosity evolution of surface sediments from the modern Ravenglass Estuary under different maximum burial conditions, between 2000 and 5000 m depth, to aid the understanding of reservoir quality distribution in a marginal marine setting. Seven sand-dominated sub-depositional environments were subject to five burial models to assess porosity-preservation in sedimentary facies. Under relatively shallow burial conditions (4000 m) experience a significant reduction in porosity due to extensive quartz cementation. Porosity is reduced to 1% in outer estuary sediments that lack grain-coating clays. However, in tidal flat sediments with continuous clay grain coats, porosity values of up to 30% are maintained due to quartz cement inhibition. The modelling approach powerfully emphasises the value of collecting quantitative data from modern analogue sedimentary environments to reveal how optimum reservoir quality is not always in the coarsest or cleanest clastic sediments.
We have developed a generalisable machine learning framework for reservoir quality prediction in deeply buried clastic systems. Applied to the Lower Jurassic deltaic sandstones of the Tilje Formation (Halten Terrace, North Sea), the approach integrates sedimentological facies modelling with mineralogical and petrophysical prediction in a single workflow. Using supervised Extreme Gradient Boosting (XGBoost) models, we classify reservoir facies, predict permeability directly from standard wireline log parameters and estimate the abundance of porosity-preserving grain coating chlorite (gamma ray, neutron porosity, caliper, photoelectric effect, bulk density, compressional and shear sonic, and deep resistivity). Model development and evaluation employed stratified K-fold cross-validation to preserve facies proportions and mineralogical variability across folds, supporting robust performance assessment and testing generalisability across a geologically heterogeneous dataset. Core description, point count petrography, and core plug analyses were used for ground truthing. The models distinguish chlorite-associated facies with up to 80% accuracy and estimate permeability with a mean absolute error of 0.782 log(mD), improving substantially on conventional regression-based approaches. The models also enable prediction, for the first time using wireline logs, grain-coating chlorite abundance with a mean absolute error of 1.79% (range 0–16%). The framework takes advantage of diagnostic petrophysical responses associated with chlorite and high porosity, yielding geologically consistent and interpretable results. It addresses persistent challenges in characterising thinly bedded, heterogeneous intervals beyond the resolution of traditional methods and is transferable to other clastic reservoirs, including those considered for carbon storage and geothermal applications. The workflow supports cost-effective, high-confidence subsurface characterisation and contributes a flexible methodology for future work at the interface of geoscience and machine learning.