The use of recycled waste has been the focus of several studies due to its potential to allow a more sustainable use of construction materials and minimize improper waste disposal in landfills or incinerators. More specifically, garment textile waste has been examined as internal reinforcement of cementitious matrices to increase the deformability and control fissure formation. In this study, polyester textiles are analyzed and incorporated in cementitious composites in order to evaluate their mechanical properties. Results show that significant improvements in mechanical properties of composites are obtained depending on the impregnation treatment applied to the textile waste. In the direct tensile stress test, the waste impregnation with styrene butadiene polymer plus silica fume improved 35.95% in the weft direction and 9.33% in the warp direction. Maximum stress increased 53.57% and 64.48% for composites with styrene–butadiene rubber impregnation and styrene–butadiene rubber plus silica fume impregnation, respectively, when compared to the unreinforced composite. The flexural tensile strength of composites impregnated reinforcements with styrene–butadiene rubber and styrene–butadiene rubber plus silica fume presented increases in strength by 92.10% and 94.73%, respectively, when compared to the unreinforced sample. The impact test confirmed that styrene–butadiene rubber plus silica fume impregnation produced greater tenacity of the composite. In the microstructure, it is confirmed that the impregnated textile reinforcement resulted in composites with greater adhesion between the fabric and the cementitious matrix. Thus, light textile waste is concluded to be a viable construction material for non-structural elements.
In the context of the COVID-19 pandemic, inadequate spaces in terms of the dimensions of the environments and lack of flexibility for possible adjustments, not only accentuate health risks, but also interfere in the productivity of remote work and school performance. In this sense, social housing has an unsatisfactory performance in terms of functionality, mainly because they have small spaces and inadequate window frames to achieve satisfactory natural ventilation and reduce the contagion by coronavirus. The objective of this article is to analyze three single-family social housings, aiming to rethink spaces, focusing on some elements necessary to protect the health and well-being of the inhabitants. The method applied concepts of functionality and useful area, in addition to the requirements and criteria of the Brazilian bioclimatic zoning and performance standards, including the construction guidelines for single-family social housings (SH) reflecting on the need to adapt SH to guarantee well-being and inhabitants' health. Analysis results showed that low-income buildings are precarious in terms of functionality and do not allow adaptations due to the architectural design and technical specification of walls and window frames.
16 November 2020 in Journal of Building Pathology and Rehabilitation