The use of plant fibers in cementitious composites has been gaining prominence with the need for more sustainable construction materials. It occurs due to the advantages natural fibers provide to these composites, such as the reduction of density, fragmentation, and propagation of cracks in concrete. The consumption of coconut, a fruit grown in tropical countries, generates shells that are improperly disposed of in the environment. The objective of this paper is to provide a comprehensive review of the use of coconut fibers and coconut fiber textile mesh in cement-based materials. For this purpose, discussions were conducted on plant fibers, the production and characteristics of coconut fibers, cementitious composites reinforced with coconut fibers, cementitious composites reinforced with textile mesh as an innovative material to absorb coconut fibers, and treatments of coconut fiber for improved product performance and durability. Finally, future perspectives on this field of study have also been highlighted. Thus, this paper aims to understand the behavior of cementitious matrices reinforced with plant fibers and demonstrate that coconut fiber has a high capacity to be used in cementitious composites instead of synthetic fibers.

Environmental concerns have come to the forefront due to the substantial role of the cement industry in the extraction and expenditure of natural resources. Additionally, industrial processes generate a considerable amount of waste, which is frequently disposed of inadequately. The objective of this study was to evaluate the simultaneous use of ornamental rock processing sludge and calcium carbonate sludge generated from the kraft process in the production of belitic clinker. These waste materials would be used in total or partial substitution of natural raw materials, namely, limestone and clay. Several formulations were produced and sintered at 1100 and 1200 °C. The raw materials were characterized physico-chemically and thermogravimetrically, with subsequent evaluation of the resulting dosed raw mixes. Mineral analyses determined that the mixtures with limestone and clay in substitution ratios of 95% and 100%, respectively, and sintered at 1100 °C have the potential to produce belite-rich clinkers. This temperature is considerably lower than those reported in reference studies. Additionally, full limestone and clay substitution could result in a 23.92% reduction in carbon dioxide in clinker production. The results confirmed the potential use of ornamental rock processing sludge and calcium carbonate sludge as viable alternative materials for cement production and, consequently, could contribute to a reduction in the negative environmental impacts of this industry.

The present paper presents the application of GUT (Gravity, Urgency, Tendency) Matrix methodology as a tool in the assessment of pathological manifestations in buildings. Three heritage constructions of the historic center of Sobral, Ceará, Brazil were studied through in situ inspections, photographic records and elaboration of the damage map. The GUT Matrix was used as a tool to rank, in each building, priority levels for each damage in order to define their order of treatment. Thus, it was possible to conclude that the applied method can be used as a useful tool to manage the maintenance of buildings through prioritization of the most significant problems and, to contribute directly to the preservation and safety of the built historical heritage.

The use of recycled waste has been the focus of several studies due to its potential to allow a more sustainable use of construction materials and minimize improper waste disposal in landfills or incinerators. More specifically, garment textile waste has been examined as internal reinforcement of cementitious matrices to increase the deformability and control fissure formation. In this study, polyester textiles are analyzed and incorporated in cementitious composites in order to evaluate their mechanical properties. Results show that significant improvements in mechanical properties of composites are obtained depending on the impregnation treatment applied to the textile waste. In the direct tensile stress test, the waste impregnation with styrene butadiene polymer plus silica fume improved 35.95% in the weft direction and 9.33% in the warp direction. Maximum stress increased 53.57% and 64.48% for composites with styrene–butadiene rubber impregnation and styrene–butadiene rubber plus silica fume impregnation, respectively, when compared to the unreinforced composite. The flexural tensile strength of composites impregnated reinforcements with styrene–butadiene rubber and styrene–butadiene rubber plus silica fume presented increases in strength by 92.10% and 94.73%, respectively, when compared to the unreinforced sample. The impact test confirmed that styrene–butadiene rubber plus silica fume impregnation produced greater tenacity of the composite. In the microstructure, it is confirmed that the impregnated textile reinforcement resulted in composites with greater adhesion between the fabric and the cementitious matrix. Thus, light textile waste is concluded to be a viable construction material for non-structural elements.