Alper Solmaz

Dr. Alper Solmaz

Environmental Protection and Control, İskenderun Technical University, İskenderun, Hatay, Turkey (Türkiye)
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2024 in Biomass Conversion and Biorefinery
Verified
Journal Article
Open access
PDF file
ASAlper Solmaz
Alper Solmaz
TTTalip Turna
Talip Turna
ABAyse Baran
Ayse Baran
In this study, environmentally friendly zinc oxide nanoparticles (OB-ZnO NPs) were synthesized using Ocimum basilicum (OB) plant waste extract, and the removal of paracetamol (PCM) from pharmaceutical wastes with toxic effects on the ecosystem was investigated. The characteristic structure of synthesized OB-ZnO NPs was determined by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscope (SEM) and energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), Zetasizer, thermogravimetry-differential thermal analysis (TGA-DTA), and UV-vis spectroscopy. The effect of the obtained OB-ZnO NPs on PCM removal was determined by batch adsorption tests. In the study in which 6 different kinetic and isotherm models were examined, error analysis functions were used to determine the most suitable model. Accordingly, the crystal structure of biosynthesized OB-ZnO NPs has a particle size of 30.39 nm, a surface area of 13.826 m2/g, and a pore volume of 0.0475 cm3/g. Since OB-ZnO NPs have a zeta potential of − 22.1 mV and a mass loss of 33% at about 750 °C, these NPs show that they are durable at high temperatures. When the PCM removal mechanisms with OB-ZnO NPs were examined, it was determined that the most suitable kinetic and isotherm model was the Elovich model with an R2 value of 0.989 and the Redlich-Peterson model with an R2 value of 0.999. In the study, which reached 23 mgPCM/gOB-ZnO NP removal efficiency, it was revealed that OB-ZnO NPs obtained from waste plants have the potential to be used in the removal of pharmaceutical wastes. Graphical abstract

5 October 2023 in Water, Air, & Soil Pollution
Verified
Journal Article
Closed access
PDF file
ASAlper Solmaz
Alper Solmaz
ZSZeynel Abidin Sari
Zeynel Abidin Sari
MKMesut Karta
Mesut Karta
TTTalip Turna
Talip Turna
AYAysegul Yucel
Aysegul Yucel
TDTolga Depci
Tolga Depci

22 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
ASAlper Solmaz
Alper Solmaz
In this study, methylene blue (MB) and eriochrome black T (EBT) dyes were removed with the waste Pinus nigra Arn. powders from Anatolian black pinecone (PC-PnA) within the framework of sustainability. UV–Vis spectroscopy, X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray (EDX), fourier transform infrared spectroscopy (FTIR), thermogravimetry–differential thermal analysis (TGA-DTA), Brunauer–Emmett–Teller (BET) surface area, and point of zero charge (pHpzc) analyses were performed for the characterization of PC-PnAs. The effects of pH, amount of adsorbent, time, initial concentration and temperature were determined by batch adsorption experiments. Four kinetic and isotherm models were examined, and error function tests were used for the most suitable model. According to this, the average pore diameters, mass losses at 103.9 and 721.6 °C and pHpzc values of PC-PnAs were found as 61.661 Å, 5.9%, 30%, and 5.77, respectively. Additionally, the most suitable kinetic and isotherm models for the removal of both dyes were Langmuir and pseudo-second-order. The maximum removal efficiencies (qmax) for MB and EBT dyes was calculated as 91.46 and 15.85 mg/g, respectively and the adsorption process was found to be endothermic. As a result, PC-PnA particles can be used as an alternative sorbent for the removal of MB and EBT dyes.

17 January 2019 in BioEnergy Research
Verified
Journal Article
Closed access
PDF file
ASAlper Solmaz
Alper Solmaz
MIMustafa Işik
Mustafa Işik

17 February 2024 in Environmental Science and Pollution Research
Verified
Journal Article
Open access
PDF file
ASAlper Solmaz
Alper Solmaz
Ömer Saltuk BÖLÜKBAŞIÖmer Saltuk BÖLÜKBAŞI
Ömer Saltuk BÖLÜKBAŞI
ZSZeynel Abidin Sarı
Zeynel Abidin Sarı
Mill scale (MS) is considered to be a significant metallurgical waste, but there is no economical method yet to utilize its metal content. In this study, which covers various processes in several stages, the solution of iron in MS, which is the Iron and Steel Industry (I&SI) waste, as FeCl3 (MS-FeCl3) in the thermoreactor in the presence of HCl, was investigated. In the next step, the conditions for using this solution as a coagulant in the treatment of I&SI wastewater were investigated using the jar test. The results of the treated water sample were compared by chemical oxygen demand (COD), total suspended solids (TSS), color, and turbidity analyses using commercial aluminum sulfate (Al2(SO4)3) and FeCl3 (C-FeCl3). Additionally, heavy metal analyses were conducted, and the treatment performance of three coagulants was presented. Accordingly, while 2.0 mg/L anionic polyelectrolyte was consumed at a dosage of 4.05 mg/L Al2(SO4)3 at pH 7.0, 0.25 mg/L anionic polyelectrolyte was consumed at a dosage of 1.29 mg/L at pH 5.0 in the C-FeCl3 and MS-FeCl3 studies. Also, Fe, Cr, Mn, Ni, Zn, Cd, Hg, and Pb removal efficiencies were over 93.56% for all three coagulant usage cases. The results showed that the wastewater treatment performance of MS-FeCl3 by the recycling of MS, which is an I&SI waste, was at the same level as C-FeCl3. Thus, thanks to recycling, waste scale can be used as an alternative to commercial products for green production. Graphical abstract