Paulo Praça

Dr. Paulo Praça

Federal University of Ceara, Fortaleza, Ceará, Brazil
orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2013 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LBLuiz Barreto
Luiz Barreto
Paulo PraçaPaulo Praça
Paulo Praça
DJDemercil Oliveira Junior
Demercil Oliveira Junior
RSRanoyca N. A. L. Silva
Ranoyca N. A. L. Silva
This paper presents a novel high-voltage gain boost converter topology based on the three-state commutation cell for battery charging using PV panels and a reduced number of conversion stages. The presented converter operates in zero-voltage switching (ZVS) mode for all switches. By using the new concept of single-stage approaches, the converter can generate a dc bus with a battery bank or a photovoltaic panel array, allowing the simultaneous charge of the batteries according to the radiation level. The operation principle, design specifications, and experimental results from a 500-W prototype are presented in order to validate the proposed structure.

20 November 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
BABruno R. de Almeida
Bruno R. de Almeida
JAJose W. M. de Araujo
Jose W. M. de Araujo
Paulo PraçaPaulo Praça
Paulo Praça
DJDemercil Oliveira Junior
Demercil Oliveira Junior
This paper presents a novel single-stage ac/dc rectifier with high-frequency isolation and bidirectional power flow capability, which is feasible to connect dc grids to ac ones. A thorough analysis is performed based on the development of an actual model as well as a fundamental one using the double-sideband amplitude modulation equations. The derived models allow the determination of the active and reactive power flow through the transformer as well as defining the operating regions for which soft commutation is achieved. Besides, the current stresses of the semiconductors devices are analyzed in detail. Experimental results obtained from a 5 kW prototype are presented and discussed in order to validate the proposed model as well as demonstrate the converter's performance and claimed advantages. The proposed concept can also be extended to dc/dc, ac/ac, and multilevel topologies.

1 January 2015 in IET Power Electronics
Verified
Journal Article
Open access
PDF file
RARanoyca Nayana Alencar Leão e Silva Aquino
Ranoyca Nayana Alencar Leão e Silva Aquino
FTFernando Lessa Tofoli
Fernando Lessa Tofoli
Paulo PraçaPaulo Praça
Paulo Praça
DJDemercil Oliveira Junior
Demercil Oliveira Junior
LBLuiz Barreto
Luiz Barreto
This study presents the qualitative and quantitative analyses, design procedure and experimental results on a soft switching cell applied to a high‐voltage gain interleaved boost converter. An active snubber cell is proposed as a possible solution for the increase of efficiency in a hard switching topology, where switching losses are drastically minimised. The main advantages of the introduced circuit are the common source terminal to all switches; zero‐voltage switching of the main switches; zero current switching of the auxiliary switches; low‐voltage stress across the switches; balanced voltage across the output capacitors; the presence of a magnetic coupling cell, which allows the gain to be significantly increased; and the magnetic components that are designed for twice the switching frequency. A prototype rated at 500 W is implemented and evaluated, where relevant issues are discussed to validate the theoretical assumptions.

30 April 2015 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HFHerminio Miguel de Oliveira Filho
Herminio Miguel de Oliveira Filho
DJDemercil Oliveira Junior
Demercil Oliveira Junior
Paulo PraçaPaulo Praça
Paulo Praça
This study presents the steady-state analysis and experimental results on a soft-switching bidirectional isolated three-phase dc-dc converter using DPS control with variable duty cycle. The topology uses three single H-bridges in the primary side and a three-phase inverter in the secondary side. High-frequency isolation is ensured by using three single-phase transformers connected in open delta-wye configuration. The variation of both phase-shift angles between the H-bridge legs and/or primary and secondary sides allows controlling the power flow, while reduced reactive power flow is possible. The variable duty cycle is used to ensure a constant voltage bus and/or zero voltage switching operation. A detailed analysis is presented considering a model based on the fundamental components for the voltages and currents in the transformer. A comparison between the fundamental and the actual models is carried out to validate the proposed model. Experimental results on a 96 V/350-400 V, 3.5 kW prototype are presented and discussed to validate the proposed approach.

1 October 2024 in International Journal of Circuit Theory and Applications
Verified
Journal Article
Closed access
Menaouar Berrehil El KattelMenaouar Berrehil El Kattel
Menaouar Berrehil El Kattel
Paulo PraçaPaulo Praça
Paulo Praça
RMRobson Mayer
Robson Mayer
Cristina do Carmo Lucio Berrehil el KattelCristina do Carmo Lucio Berrehil el Kattel
Cristina do Carmo Lucio Berrehil el Kattel
RBRené Pastor Torrico Bascopé
René Pastor Torrico Bascopé
BFBraz Cardoso Filho
Braz Cardoso Filho

29 September 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LBLuiz Barreto
Luiz Barreto
DHDalton Honorio
Dalton Honorio
DJDemercil Oliveira Junior
Demercil Oliveira Junior
Paulo PraçaPaulo Praça
Paulo Praça
This paper proposes an interleaved-stage ac-dc bidirectional power converter topology feasible to medium-voltage railway systems. It is based on an arrangement that uses input-series-output-parallel configuration with identical power modules. Each module consists of two interleaved legs employing coupled windings so that it is possible to connect a medium-frequency transformer. The topology conception is presented, followed by the adopted control and modulation technique. An estimation of semiconductor losses is also discussed, while a comparative analysis by means of simulation results validates the improved performance of the introduced approach if compared with similar solutions. The topology results are obtained through a medium-voltage high-power railway application, demonstrating the converter functionalities and performance under both steady-state and dynamic conditions. It is then possible to state that good performance in terms of efficiency is achieved even though the power stage presents higher component count if compared with the topology that presents the best result, thus making it suitable to high-power ac-dc machine drive applications.