Dalton Honorio

Dr. Dalton Honorio

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LBLuiz Barreto
Luiz Barreto
DHDalton Honorio
Dalton Honorio
DJDemercil Oliveira Junior
Demercil Oliveira Junior
Paulo PraçaPaulo Praça
Paulo Praça
This paper proposes an interleaved-stage ac-dc bidirectional power converter topology feasible to medium-voltage railway systems. It is based on an arrangement that uses input-series-output-parallel configuration with identical power modules. Each module consists of two interleaved legs employing coupled windings so that it is possible to connect a medium-frequency transformer. The topology conception is presented, followed by the adopted control and modulation technique. An estimation of semiconductor losses is also discussed, while a comparative analysis by means of simulation results validates the improved performance of the introduced approach if compared with similar solutions. The topology results are obtained through a medium-voltage high-power railway application, demonstrating the converter functionalities and performance under both steady-state and dynamic conditions. It is then possible to state that good performance in terms of efficiency is achieved even though the power stage presents higher component count if compared with the topology that presents the best result, thus making it suitable to high-power ac-dc machine drive applications.

16 June 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
OSOlympio Cipriano da Silva
Olympio Cipriano da Silva
FTFernando Lessa Tofoli
Fernando Lessa Tofoli
DHDalton Honorio
Dalton Honorio
LBLuiz Barreto
Luiz Barreto
DJDemercil Oliveira Junior
Demercil Oliveira Junior
This article presents three single-phase isolated ac–ac converters based on the dual active bridge (DAB) converter and interleaved transformers. The structures allow obtaining filter elements with reduced dimensions, as well as bidirectional power flow and high efficiency over a wide load range. Multilevel voltage waveforms exist in the input and output sides of the symmetrical converters, resulting in reduced harmonic content. The possible arrangements include a symmetrical half-bridge converter (SHBC), a symmetrical full-bridge converter (SFBC), and a symmetrical interleaved full-bridge converter (SIFBC). The introduced topologies can be regarded as prominent solutions for applications involving solid-state transformers, dynamic voltage restorers, and uninterruptible power supplies. A thorough mathematical analysis of the SHBC is carried out and experimental results are presented to investigate the converter performance in steady-state and transient conditions.

15 October 2021 in IEEE Access
Verified
Journal Article
Open access
WLWelton da S. Lima
Welton da S. Lima
LMLuan Carlos dos S. Mazza
Luan Carlos dos S. Mazza
GHGustavo A. de L. Henn
Gustavo A. de L. Henn
DHDalton Honorio
Dalton Honorio
Paulo PraçaPaulo Praça
Paulo Praça
LBLuiz Barreto
Luiz Barreto
This paper presents an integrated single-phase bidirectional ac–dc converter based on a dual-active-bridge (DAB) topology. The primary side is based on a multi-state switching cell (MSSC) with a T-type (TNPC) cell, which is composed of two three-level interleaved legs and coupled inductor, while the secondary side is a single-phase full-bridge (FB). Moreover, a comparative analysis between an isolated ac–dc converter with a neutral point clamped (NPC) converter on the primary side is presented. The basic converter operating principles and experimental results of a 850 W prototype are presented in order to validate the theoretical analysis. The control strategy is implemented on the TMS320F28379D DSP. The proposed topology achieves a maximum efficiency of 91.40% at 300 W output power, and 89.40% at rated power. From the experimental results, it can be stated that the converter based on the T-type topology is more efficient than the structure based on the NPC.

24 July 2019 in IEEE Access
Verified
Journal Article
Open access
JPJuliano De O. Pacheco
Juliano De O. Pacheco
DHDalton Honorio
Dalton Honorio
DJDemercil Oliveira Junior
Demercil Oliveira Junior

17 November 2022
Verified
Conference Paper
Closed access
ALAndre Abreu de M. Lima
Andre Abreu de M. Lima
Francisco SouzaFrancisco Souza
Francisco Souza
EMErnande E. Campelo Morais
Ernande E. Campelo Morais
DHDalton Honorio
Dalton Honorio
LBLuiz Barreto
Luiz Barreto
This article presents the framework proof of concept for fault detection and identification in power electronics converters using Digital Twins. Therefore, the Digital Twins contextualization on power electronics converter is presented since it is a recent trend in this research field. Moreover, a study and classification are carried out in terms of the main failures reported by the literature on power electronics. To validate the basic methodology, a buck dc-dc power converter simulation model was elaborated on Simulink, interfaced with an external DSP, providing the link with the real time requested by such monitoring applications. The results evidence that the intentional failure scenarios in the simulation are, indeed, identified and categorized by the external DSP. Thus, this proof of concept delivers the basic step for a framework capable to provide the communication of real power converters with their respective simulation model in order to provide data comparison in the monitoring of fault situations.

29 March 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
DHDalton Honorio
Dalton Honorio
JAJose W. M. de Araujo
Jose W. M. de Araujo
LBLuiz Barreto
Luiz Barreto
DJDemercil Oliveira Junior
Demercil Oliveira Junior
This work proposes an extensive investigation of a solid-state transformer (SST) with an integrated ac–dc bidirectional stage feasible to medium-voltage (MV) railway systems, based on an arrangement that uses an input-series-output-parallel (ISOP) configuration with identical power modules. Each module has a three-leg configuration: in the primary side, there are two interleaved legs using coupled windings connected to a medium-frequency transformer (MFT) and another leg operating at the grid frequency; and a conventional H-bridge is used in the secondary side. Qualitative and quantitative analyses are presented to demonstrate the aspects of the proposed topology and are validated by steady-state experimental results using an 8.33-kW prototype. Dynamics results are also presented, with a two-module structure with a low rated power to validate the control strategy and modularity. A comparative analysis considering real traction system parameters is carried out, demonstrating some well-defined trends of the proposed topology in this application, such as a reduction in conduction loss up to 32% and lower number of switches compared with another five topologies. The analyses and preliminary results show that the proposed structure could indeed be considered as a possible solution for SSTs in MV traction systems.