The Upper Triassic Chang-7 Member of the Ordos Basin contains typical tight sandstone reservoirs. Reservoir quality is affected by diagenesis, which is a critical factor in tight oil exploration. In this study, the Chang-7 Member tight sandstones were studied by a variety of experimental methods, including thin sections, scanning electron microscopy (SEM), and X-ray diffraction (XRD), to determine the reservoir characteristics and diagenesis and discuss their influences on the reservoir quality. The Chang-7 Member sandstones are mainly lithic arkose and feldspathic litharenite with an average porosity and permeability of 7.17% and 0.13 mD, respectively. The pore type is mainly primary intergranular pores, and the secondary pores are feldspar dissolved pores, which are relatively developed, with pore radii of 2–20 µm. Diagenesis of Chang-7 Member tight reservoirs mainly includes compaction, quartz cementation, carbonate cementation, clay mineral cementation, and dissolution. The diagenetic stage develops into Mesodiagenesis A. The average porosity loss from compaction and cementation of sandstone in the Chang-7 Member is 15.93% and 18.67%, respectively. With the increase in burial depth, the porosity and permeability of the reservoir gradually decrease. In mesodiagenesis, the authigenic illite and carbonate cementation compacts the reservoir. The acid fluid carried by the two stages of oil and gas filling during diagenesis dissolved feldspar and carbonate cement, which plays a certain role in transforming the tight reservoir.

Temporal constraints on the closure of the eastern segment of the Palaeo-Asian Ocean along the northern margin of the North China Craton (NCC) remain unclear. As a part of the NCC, the sedimentation and tectonic evolution of the Late Palaeozoic Ordos Basin were closely related to the opening and closing of the Palaeo-Asian Ocean. We use petrology, quantitative mineralogical analysis, U–Pb geochronology and trace element signatures of detrital zircons of the Lower Shihezi Formation from two sections in the eastern north Ordos Basin and two sections in the western north Ordos Basin to reconstruct the sedimentary provenance and tectonic background of the northern Ordos Basin. The results show that the sediments of the western sections were mainly derived from the Yinshan orogenic belt and Alxa block, and that those in the eastern sections only came from the Yinshan orogenic belt. The trace element ratios in detrital zircons from the Late Palaeozoic sandstones indicate that the source areas were mainly subduction-related continental arcs, closely related to the continued subduction of the Palaeo-Asian Ocean in the Late Palaeozoic. Since the main Late Palaeozoic magmatic periods vary on the east and west sides of the northern margin of the Ordos Basin, two main collisions related to Palaeo-Asian Ocean closure are recorded. The collision on the west side occurred significantly earlier than that in the east. This study implies that the Palaeo-Asian Ocean began to subduct beneath the NCC in the Carboniferous and gradually closed from west to east thereafter.

This study explores the sedimentary environment and tectonic implications of the Upper Carboniferous Yanghugou Formation on the western margin of the Ordos Basin through the analysis of major elements, trace elements, and rare earth elements in 23 mudstone samples. The results indicate moderate chemical weathering conditions, as reflected in the Chemical Alteration Index (CIA) and Component Variability Index (ICV) values. Warm and humid paleoclimatic conditions are suggested by Rb/Sr, Sr/Cu, spore, and pollen fossil samples. The paleosalinity of the water is identified as a transitional phase of a brackish water environment based on Sr/Ba and Th/U ratios. Additionally, V/(V + Ni) and δU values imply a transitional phase of a weak oxidation–reduction environment for the water. In accordance with the La-Th-Sc, Th-Sc-Zr, Th-Co-Zr, (La/Yb)-∑REE, and (La/Th)-Hf discrimination diagrams, it is inferred that the study area is part of a continental marginal tectonic setting. The sediments are primarily derived from an upper-crust felsic source area. The sedimentary period of the Yanghugou Formation in the western margin of the basin is considered a marginal rift basin characterized by north–south compression and western rift extension. This setting is influenced by the active continental margin of the Alxa block and the passive continental margin of the Qilian–north Qinling orogenic belt.

The Carboniferous Yanghugou Formation in the western margin of the Ordos Basin exhibits significant potential for oil and gas exploration. However, due to the influence of complex tectonic activities, there are substantial variations in stratigraphic thickness and depositional environments across the formation. The lack of a systematic source–sink comparative study has resulted in an unclear understanding of sediment sources and paleogeographic patterns, impacting the exploration for hydrocarbon accumulations. We conducted a comprehensive study of the source–sink system characteristics and paleogeography in the research area through field outcrop observations and drilling core sampling. By utilizing detrital zircon U–Pb geochronology and geochemistry, paleocurrent directions, lithofacies types, and sedimentary features, we delve into the understanding of the source–sink systems. Four major source–sink regions in the research area were identified: the Alxa, Yinshan, Alxa–Yinshan mixed and Qilian source–sink regions. The Alxa source–sink region formed a transitional delta-barrier-island sedimentary system. The northern part of the Yinshan source–sink region developed a transitional tidal-controlled delta-tidal-flat sedimentary system, while the southern deep-water area developed a shallow marine to semi-deep marine shelf sedimentary systems. The sediments of Alxa–Yinshan mixed source–sink region were deposited in a transitional tidal-controlled delta-tidal-flat barrier-island system. The Qilian source–sink region is characterized by small tidal-controlled delta-barrier-island system. From the analysis of the source–sink systems, it is inferred that the Alxa Block and the North China Craton had already merged before deposition of the late Carboniferous Yanghugou Formation. The delta sand bodies in the Alxa–Yinshan mixed source–sink region have the highest compositional and structural maturity, the best reservoir performance, and the great exploration potential.

Tectonic events caused by paleoearthquakes are reflected in sediments. Outcrops and cores from the Chang-7 Member of the Late Triassic Yanchang Formation, Ordos Basin in Northern China, yield a wide variety of soft-sediment deformation structures (SSDSs), many of which are laterally extensive for more than 150 km. They include various types of folds, soft-sediment liquefaction flow deformation (liquefied sand dyke, liquefied breccia), gravity-driven deformation (load structures, ball-and-pillow structures), hydroplastic deformation (loop bedding, convolute deformation), and brittle deformation (intrastratal and stair-step faults, cracks). In most cases, deformation resulted in hybrid brittle-ductile structures exhibiting lateral variation in deformation style. These occur in delta front to semideep-to-deep lake sands and mudstones (shales). The seismites recognized in outcrops and cores indicate earthquakes with magnitudes (Ms) between 6 and 8, which are interpreted as a response to orogenic events related to the collision of the South China Block (SCB) and North China Block (NCB) during the Late Triassic period. Systematic study of the spatial and temporal distribution of these seismites improves the understanding of the tectonic context and evolutionary history of sedimentary basements. This study can provide a new perspective on the evolution of tectonic activities in the basin.