Aluminium-copper alloys of the 2xxx type receive their excellent mechanical properties by the formation of copper-rich precipitates during hardening. Size, distribution and crystal structure of the formed precipitates determine the final strength of those alloys. Adding traces of certain elements, which bind to vacancies, significantly influences the decomposition behaviour, i.e. the diffusion of the copper atoms. For high-purity ternary alloys (Al-1.7 at.% Cu-X), we investigate the interaction of copper and trace element atoms (X=In, Sn, and Pb) with quenched-in vacancies by Positron Annihilation Lifetime Spectroscopy (PALS). By employing Vickers microhardness, Differential Scanning Calorimetry (DSC) and Small Angle X-Ray Scattering (SAXS) we obtain a comprehensive picture of the decomposition process: opposite to predicted binding energies to vacancies by ab-initio calculations we find during ageing at room and elevated temperature a more retarded clustering of copper in the presence of In rather than for Sn additions, while Pb, having the highest predicted binding to vacancies, shows nearly no retarding effect compared to pure Al-Cu. If the latter would be due to a limited solubility of lead, it had to be below 2 ppm. Transmission Electron Microscopy (TEM) as imaging method complements our findings. Annealing the quenched Al-1.7 at.% Cu-X-alloys containing 100 ppm In or Sn at $$150\,^\circ {\text {C}}$$150∘C leads to finely distributed $$\theta \, '$$θ′ -precipitates on the nanoscale, since due to the trace additions the formation temperature of $$\theta \, '$$θ′ is lowered by more than $$100\,^\circ {\text {C}}$$100∘C . According to TEM small agglomerates of trace elements (In, Sn) may support the early nucleation for the $$\theta \, '$$θ′ -precipitates.

Cemented carbide is a hard composite material, used widely in a variety of industries. The value of the global tungsten carbide market is expected to grow by 4.4% (compound annual growth rate) from 2017 to 2022. One of the main markets is in metal cutting and wear parts, where small pieces (or inserts), a few grams in weight, are used. Field-assisted sintering technique (FAST) technologies allow for the production of small blanks in a single step from powder, which are near final dimensions. Production cycles are very short. In this paper, one of the FAST processes, the ERS technology, is applied to obtain WC10Co parts. A review of the process variable effects on the final properties of the parts is accomplished. Final properties of a range of conventionally produced inserts are obtained, using 100 MPa compacting pressure, 80 MA/m² of current density, and processing times of around 800 ms.