In this paper, we present very recent results regarding the latency characterization of a novel bidirectional visible light communication (VLC) system for vehicular applications, which could be relevant in intelligent transportation system (ITS) safety applications, such as the assisted and automated braking of cars and motorbikes in critical situations. The VLC system has been implemented using real motorbike head- and tail-lights with distances up to 27 m in a realistic outdoor scenario. We performed a detailed statistical analysis of the observed error distribution in the communication process, assessing the most probable statistical values of expected latency depending on the observed packet error rate (PER). A minimum attainable observed round-trip latency of 2.5 ms was measured. Using our dataset, we have also estimated the probability to receive correctly a message with a specific average latency for a target PER, and we compare it to the ultra-reliable low-latency (URLL) 5G communications service. In addition, a mobility model is implemented to compare the VLC and radio frequency (RF) technologies (IEEE802.11p, LTE, 5G) to support an automated braking systems for vehicles in urban platooning.
27 November 2023 in Journal of Lightwave Technology
Optical Antennas (OAs) based on Fluorescent Concentrators (FCs) promise a revolution in the deployment of Visible Light Communication (VLC) and Optical Wireless Communication (OWC), due to their inherent advantages over conventional receivers in terms of exceedingly larger field of view (FoV) and optical gain (OG). Whilst FC-based OAs have been demonstrated in VLC applications in a wealth of works embedding monochromatic UV and Blue LED sources, a detailed study demonstrating the performances of OA in white-light VLC (WLC) applications, which is at the basis of the deployment of VLC for Internet of Things (IoT), 6G and pervasive networks, is still lacking. In our work we present and test two 50 mm x 50 mm OAs for WLC, based on two of the most effective fluorophores (Lumogen Red 305 F and DQ1, respectively) used in Luminescent Solar Concentrator (LSC) applications. We perform a detailed characterization of intrinsic and VLC performances, comparing the results with a novel Monte Carlo model accurately describing the photon conversion and propagation processes. Whilst DQ1 represents the most suited solution for high-speed VLC with UV/blue LEDs, our results highlight excellent performances of Lumogen-based OA in white-light settings, outpacing the performances of ordinary photodiode-based receivers. Our results pave the way towards the full-fledged deployment of VLC in IoT applications, where the availability of detectors with large-area, wide FoV and enhanced OG covering the white LEDs emission is a central element.
One of the main challenges in the deployment of visible light communication (VLC) in realistic application fields, such as intelligent transportation systems (ITSs), is represented by the presence of large background noise levels on top of the optical signal carrying the digital information. A versatile and effective digital filtering technique is, hence, crucial to face such an issue in an effective way. In this paper, we present an extensive experimental evaluation of a complete VLC system, embedding a software-defined-radio (SDR)-based digital signal processing (DSP) filter stage, which is tested either indoors, in the presence of strong artificial 100-Hz stray illumination, and outdoors, under direct sunlight. The system employs low-power automotive LED lamps, and it is tested for baud rates up to 1 Mbaud. We experimentally demonstrate that the use of the DSP technique improves 10× the performance of the VLC receiver over the original system without the filtering stage, reporting a very effective rejection of both 100-Hz and solar noise background. Indoors, the noise margin in the presence of strong 100-Hz noise is increased by up to 40 dB, whilst in the outdoor configuration, the system is capable of maintaining error-free communication in direct sunlight conditions, up to 7.5 m, improving the distance by a factor of 1.6 compared to the case without filtering. We believe that the proposed system is a very effective solution for the suppression of various types of noise effects in a large set of VLC applications.
Photon counting detector arrays are commonly used for deep space optical communication receivers operating on the principle of intensity modulation/direct detection (IM/DD). In scenarios where beam parameters can vary at the receiver due to scattering, it is important to estimate beam parameters in order to minimize the probability of error. The use of array of detectors increases the sensitivity of the receiver as compared to single photo-detector of the same size. In this paper, we present the derivation of a maximum likelihood estimator (ML) for peak optical intensity, providing both numerical and closed form expressions for the estimator. Performance of both forms of ML estimator are compared using the mean squared error (MSE) criterion and Cramer–Rao Lower Bound (CRLB) is also derived to assess the proposed estimator’s efficiency. This research contributed to the advancement of estimation techniques and has practical implications for optimizing deep space optical communication systems.