Mitigation of interference among adjacent radio systems is a topic of growing interest as the spectrum occupation increases. Site-shielding techniques appear as a method of improving millimeter-wave wireless communication system design, allowing frequency reuse and reducing cochannel interference. The viability of applying such techniques to systems operating in frequency bands around 40 GHz is the aim of this paper. Several propagation mechanisms are experimentally studied, including transmission across building obstacles, depolarization, reflection, and diffraction. The performance of some theoretical models of the different scattering mechanisms has been compared with measurement results. The measuring and processing procedures have also been improved. Values of the dielectric parameters of the materials in this frequency band have been obtained and are given in this paper. The attenuation results indicate that various materials, such as mortar, brick, and concrete walls, that present large values of attenuation in decibels per centimeter, can be used to shield base stations, reducing the frequency reuse distance in radio cellular networks. It can also be concluded that there is a significant diffracted field in the shadow region of brick corners.

We introduce an innovative 3-D mechanically tunable frequency selective surface (FSS), which is inspired by the classical flat square slot FSS. The proposal improves the performance of classical 2-D FSS designs, and it also represents a novel method of achieving mechanical frequency tuning, despite other 3-D designs that consist of a collection of stacked 3-D layers exist. In our proposal, the rotation of an inner element provides tuning capability to the squared cell structure, consisting of metallic grids with a movable inner element. An aluminum prototype was built, which can be tuned from 2.4 to 4 GHz, and also compared its measured performance and numerical simulations. Some characteristics of the proposed structure are the rejection level at main polarization, up to 20 dB, and the maximum frequency sweep of approximately 50% of the fundamental frequency. The prototype showed a stable frequency response for angles of incidence up to 45°. Since results are in good agreement with simulations, we provide parametric equations to design 3-D structures at desired frequencies.

The use of wireless networks is continuously increasing, as well as extending to new purposes and new environments, mainly outdoor oriented and some of them at vegetation media. Although there are multiple propagation studies at wireless network frequency bands within vegetation scenarios, most of them are focused on classical base station to mobile terminal configuration. The main aim of this research is to provide a propagation study for the three most commonly used wireless network frequencies: 2.4, 3.5 and 5.8 GHz in a peer to peer configured system, where both, the transmitter and the receiver are located at the same low heights, within vegetation media, including forests and meadows.

Our society has become fully submersed in fourth generation (4G) technologies, setting constant connectivity as the norm. Together with self-driving cars, augmented reality, and upcoming technologies, the new generation of Internet of Things (IoT) devices is pushing the development of fifth generation (5G) communication systems. In 5G architecture, increased capacity, improved data rate, and decreased latency are the objectives. In this paper, a measurement campaign is proposed; we focused on studying the propagation properties of microwaves at a center frequency of 3.5 GHz, commonly used in 5G cellular networks. Wideband measurement data were gathered at various indoor environments with different dimensions and characteristics. A ray-tracing analysis showed that the power spectrum is dominated by the line of sight component together with reflections on two sidewalls, indicating the practical applicability of our results. Two wideband parameters, root mean square delay spread and coherence bandwidth, were estimated for the considered scenarios, and we found that they are highly dependent on the physical dimension of the environment rather than on furniture present in the room. The relationship between both parameters was also investigated to provide support to network planners when obtaining the bandwidth from the delay spread, easily computed by a ray-tracing tool.