Several recent studies have found that measuring the dielectric permittivity of soil can be used to determine the level of environmental pollution. However, there is limited research on the measurement of dielectric properties in soil contaminated with biodiesel-diesel blends from Thailand. This paper presents to monitor the dielectric properties of soil contaminated with biodiesel-diesel blends. Specifically, we use the commercial grade diesel B7 to contaminate a sample of sand soil. We also study the measurement of dielectric properties in contaminated soil with the diesel B7 using a dual electrode plate-based radio frequency (RF) heating system. This allows us to observe the behavior of the contaminated soil before and after RF heating treatment. The experimental result showed that the dielectric properties of uncontaminated and contaminated soil were different. In addition, the RF heating system utilizing the electric field intensities of 450 kV/m resulted in the dielectric properties of the contaminated soil becoming similar to those of uncontaminated soil. These findings suggest that using RF heating on contaminated soil samples improve the air in the pore space compared to unheated contaminated soil. This approach may be effective for the treatment of soil in Thailand using an RF heating system with dual electrode plates.

This research investigated the effectiveness of radio frequency (RF) heating as a treatment for lead-contaminated soil, assessing its impact through dielectric constant measurements. Using water-soluble lead (II) acetate trihydrate, the study analyzed the impact of RF heating on soil dielectric properties under various soil moisture conditions (high, medium, and low) and electric field strengths (112.5, 150, 225, and 450 kV/m). The results indicated that soil temperature increased with lead concentration, highlighting significant changes in soil thermodynamics. Under high-humidity conditions, temperature increases were more pronounced, suggesting that higher lead concentrations elevate soil temperatures. Moreover, RF heating consistently reduced the dielectric constant as lead concentration increased, which was especially evident at higher electric field strengths. The study found that the soil resistivity approached that of uncontaminated soil, particularly at 450 kV/m electric field strength, with the highest removal rate of 46.154%. This investigation provides valuable insights into the application of RF heating for soil quality improvement in lead-contaminated environments, demonstrating how dielectric properties can reflect those of uncontaminated soil.