Chalcogenide glasses as kind of diamagnetic magneto-optical materials have promising applications in the field of integrated optics and optical communication systems due to their excellent properties, such as easy to be processed into waveguide and temperature independence of the Verdet constants. For clarifying the influence factors following the compositional variation on Faraday effect and finding a glass with a large Verdet constant, novel pseudo-ternary chalcogenide glass system, GeS2 - In2S3 - PbI2, was prepared and investigated. The composition, wavelength and temperature dependences on the Verdet constants were systematically investigated at the wavelengths of 635, 808, 980 and 1319 nm. PbI2 was confirmed to have positive contribution to the Verdet constant and the Becquerel rule was proved to be an effective guidance for predicting the Verdet constant in chalcogenide glasses. The 60GeS2·15In2S3·25PbI2 glass was found to possess the largest Verdet constant (V = 0.215 min·G−1·cm−1, @808nm), which is great larger than that of commercial diamagnetic glasses. These glasses also possess good glass-forming ability and VIS-IR transmittance, therefore be a good candidate for next-generation integrated optical isolator and other magneto-optical devices.
For developing an ideal efficient and low-threshold medium for fiber lasers operated at 4 μm wavebands, 0.05 wt.% to 0.5 wt.% Dy3+ ions doped Ga0.8As39.2S60 chalcogenide glasses were investigated and a 4.2 μm fiber laser was theoretically studied based on the rate and propagation equations. It was shown that the Ga0.8As39.2S60 glass shows a desirable large Dy3+ ion solubility, which has been increased by an order of magnitude compared to As2S3 glass. Dy-rich nanocrystallines were found when the Dy3+ ions’ concentration is more than 0.3wt.% (i.e. 3000 ppmw), and the concentration quenching was found based on spectral analysis; however, no rapid decreases in lifetimes were observed. 0.3wt.% Dy3+ doped Ga0.8As39.2S60 glass possesses relatively large laser quality factor σemi × τmea = 1.70 × 10−23 cm2·s and excellent thermal stability (ΔT = 182°C), which can be successfully drawn into fibers indicating good potential for mid-infrared fiber laser.
A type of Tm-doped silica fiber laser with narrow-linewidth and output wavelength near 1750 nm was firstly presented, by using a 1550 nm Er-doped fiber laser pump source and a volume Bragg grating (VBG). By means of a 15 cm Tm-doped fiber, a 400 mW continuous wave (cw) at ~1750 nm with FWHW of ~54 pm was generated, corresponding to an average slope efficiency up to 23.5% with respect to absorbed pump power. The influence of gain fiber length on the spectrum wavelength has been investigated in detail. All experimental results demonstrate that this fiber laser will be an effective and promising pump source for mid-IR laser output.
23 January 2024 in Journal of Lightwave Technology
An infrared evanescent wave sensor was developed to accurately detect ascorbic acid (vitamin C) in food and drugs. The sensor was fabricated by tapering and bending of As 2 S 3 infrared fibers. Due to the broad transmission range (5000–1500 cm −1 ) of the infrared fibers, covering the characteristic absorption peak of ascorbic acid (C = O at 1760 cm −1 and C = C at 1690 cm −1 ), the sensor is capable of accurately identifying and detecting the concentration of ascorbic acid. Experimental results demonstrated that a conically tapered fiber sensor with a waist diameter of 50 μm, waist length of 30 mm, and a radius of 2 mm achieved a maximum sensitivity of 0.1257 (a.u./(mg·ml −1 )) and a limit of detection (LoD) of 0.917 mg/ml. Furthermore, the application of this fiber sensor in various vitamin C-containing tablets and juices validated its high accuracy and minimal measurement deviation (as low as 0.19 mg/ml). Compared to traditional detection methods, the sensor not only provides a faster and cost-effective solution to identify the substance but also maintains high accuracy. It offers a new approach to quantitative and qualitative analysis of food and drugs.