Nima Tashakor

Dr. Nima Tashakor

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 July 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
Jingyang FangJingyang Fang
Jingyang Fang
HDHan Deng
Han Deng
Nima TashakorNima Tashakor
Nima Tashakor
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
SGStefan M. Goetz
Stefan M. Goetz
Advances in the fields of renewable generation, electric vehicles, and energy storage systems push forward the research on ac-dc and dc-ac grid-tied power converters. However, variabilities of power converters create new challenges in modeling and control. Existing state-space models fail to accurately describe various types of grid-tied converters, particularly those with grid-supportive services, which are increasingly required by upcoming grid codes. As such, this article first proposes to classify grid-tied converters into four basic types according to their ac and dc characteristics. Subsequently, corresponding detailed state-space models of grid-tied converters are introduced, which serve as a useful tool for stability analysis. On top of that, this article further proposes control implementations of grid-supportive services related to active and reactive power control, including droop, inertia, and oscillation damping. Finally, simulation and experimental results demonstrate the effectiveness of the proposed models and grid-supportive services.

21 December 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
Farshid NaseriFarshid Naseri
Farshid Naseri
EFEbrahim Full Professor Farjah
Ebrahim Full Professor Farjah
Erik SchaltzErik Schaltz
Erik Schaltz
Kaiyuan LuKaiyuan Lu
Kaiyuan Lu
Nima TashakorNima Tashakor
Nima Tashakor
In this paper, an efficient control strategy for three-phase four-switch inverter-fed Brushless DC Motor (BLDCM) drives with trapezoidal back Electromotive Force (EMF) is proposed. In the proposed approach, the outer control loop for adjusting the motor speed is designed using Model Predictive Control (MPC) while the inner control loop based on a hysteresis controller regulates the BLDC phase currents. To effectively adjust the current of the uncontrolled phase in the four-switch inverter, efficient switching strategies for motor and generator modes are suggested. The proposed control scheme achieves favorably low torque ripples and improves the speed transient response in terms of tracking error and speed overshoot/undershoot. Therefore, it can be an ideal candidate for low-cost low-power BLDCM applications. Also, the MPC-based speed control loop is tuned by solving a suitable cost function in an offline manner to minimize the real-time computational effort. Using the foregoing technique, it is shown that the implementation of the proposed MPC-based controller becomes as simple as the PI controller while the MPC-based controller achieves superior control performance. The proposed BLDCM drive scheme is experimentally verified in a Hardware-in-the-Loop (HiL) test setup with a 1200W BLDCM and dSPACE1104 development board. The experimental results demonstrate the benefits of the proposed drive system.

2 February 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Jingyang FangJingyang Fang
Jingyang Fang
SYShunfeng Yang
Shunfeng Yang
HWHaiyu Wang
Haiyu Wang
Nima TashakorNima Tashakor
Nima Tashakor
SGStefan M. Goetz
Stefan M. Goetz
Modular multilevel converters (MMCs) enjoy the benefits of modularity and scalability. In particular, MMCs with symmetrical half-bridge submodules enable bipolar operation yet with a simple structure and low conduction losses. However, bulky dc capacitors in MMC submodules act as one major obstacle that retards the further improvement of system size, weight, and cost performance. Additionally, tight regulation and balance of dc capacitor voltages necessitate expensive voltage sensors paired with dedicated voltage controllers. This article proposes an effective hardware-based strategy that achieves MMC capacitance reduction through parallelization of symmetrical half-bridge submodules. On top of capacitance saving, the proposed strategy balances capacitor voltages in a sensorless fashion, which translates into the removal of voltage sensors and great simplification of control efforts. In addition, the proposed strategy allows fault-tolerant operation of MMCs. Finally, simulation and experimental results validate the effectiveness of the proposed strategy in capacitance reduction and capacitor voltage balancing of MMCs as static compensators.

31 May 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JKJan Kacetl
Jan Kacetl
Jingyang FangJingyang Fang
Jingyang Fang
TKTomas Kacetl
Tomas Kacetl
Nima TashakorNima Tashakor
Nima Tashakor
SGStefan Goetz
Stefan Goetz
Larger battery packs, an efficient battery management system, highly efficient electromechanical conversion, and fast battery charging are the key factors for extending the drive range of electric vehicles and the expansion of electromobility. We present a novel highly stable modular multilevel powertrain design with a variable dc-bus voltage, active inner battery energy flow control, and reduced filter size. The underlying powertrain design replaces conventional hard-wired batteries by a modular multilevel architecture, thus modularizing the battery pack and increasing the energy efficiency, reducing the output filter size, and providing full control over the output voltage and energy flow of the battery cells. We analyse the large-signal stability of the proposed system and compare it to dc/dc-dc/ac conventional multiconverter powertrains, demonstrating better stability and lower filter requirements. Further, we experimentally evaluate the proposed system structure. In the experimental setup, we achieve stable converter operation with the output filter capacitor reduced by a factor of 24 and the filter inductor reduced by a factor of 17 compared to dc-dc-dc-ac reference system, thereby leading to a significant reduction of system cost, size, and weight.

1 December 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Nima TashakorNima Tashakor
Nima Tashakor
MKMuhammet Kilictas
Muhammet Kilictas
EBEhsan Bagheri
Ehsan Bagheri
SGStefan Goetz
Stefan Goetz
Cascaded H-bridge and modular multilevel converters (MMC) are on the rise with emerging applications in renewable energy generation, energy storage, and electric motor drives. However, their well-known advantages come at the price of complicated balancing, high-bandwidth isolated monitoring, and numerous sensors that can prevent MMCs from expanding into highly cost-driven markets. Therefore, an obvious trend in research is developing control and topologies that depend less on measurements and benefit from simpler control. Diode-clamped topologies are considered among the more applicable solutions. The main problem with a diode-clamped topology is that it can only balance the module voltages of a string in one direction; therefore, it cannot provide a completely balanced operation. This paper proposes an effective balancing technique for the diode-clamped topology. The proposed solution exploits the dc component of the arm current by introducing a symmetrically level-adjusted phase-shifted modulation scheme, and ensures the balancing current flow is always in the correct direction. The advantages of this method are sensorless operation, reduced computation and control effort, lower communication requirement, removing the voltage sensors, and low overall cost. Analysis and detailed simulations provide insight into the operation of the new balancing technique and the experimental results confirm the provided discussions.

20 August 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Nima TashakorNima Tashakor
Nima Tashakor
ZLZhongxi Li
Zhongxi Li
SGStefan M. Goetz
Stefan M. Goetz
Since the introduction of modular multilevel converters (MMC), various additional features have been introduced for MMCs, among them parallel inter-module connectivity. However, such a parallel mode requires appropriate modulation and switching strategies to exploit its full potential. Low-frequency switching modulation is widely used with half-bridge modules and a large body of research focusses on the optimum control and scheduling of these methods. However, so far, a suitable adaptation for MMCs with parallel mode is missing, and existing methods perform suboptimum. This article proposes a generic scheduling algorithm for simple and low-cost integration with low-frequency switching modulation. The proposed method reduces control complexity, minimizes power loss, and can be combined with most modulation techniques, including nearest-level modulation (NLM) and selective harmonic elimination. The text in this article provides a general algorithm for integrating this method with other control levels and analyzes its effect on MMCs with parallel functionality. Moreover, it examines the performance of the system with NLM combined with the proposed scheduler and compares it to other alternatives. Results show up to a 50% reduction in power loss with a similar modulation technique as well as significantly lower THD and power loss compared to optimized phase-shifted carrier modulation as another sensorless alternative method.