Marek Staf

Dr. Marek Staf

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2016 in Chemical Papers
Verified
Journal Article
Closed access
MSMarek Staf
Marek Staf
PBPetr Buryan
Petr Buryan

1 February 2024 in Annals of Nuclear Energy
Verified
Journal Article
Open access
MSMarek Staf
Marek Staf
LŠLadislav Šnajdárek
Ladislav Šnajdárek
THTomáš Hlinčík
Tomáš Hlinčík

30 June 2022 in Acta Polytechnica
Verified
Journal Article
Open access
PDF file
MNMarek Nedoma
Marek Nedoma
MSMarek Staf
Marek Staf
Jan HrdličkaJan Hrdlička
Jan Hrdlička
This paper focuses on the laboratory experiments of low-temperature adsorption of CO2 at elevated pressure and on the validation of our mathematical model with the data obtained. The numerical approach uses fitting of adsorption isotherm parameters and sensitivity analysis of parameters influencing the breakthrough curve shape and onset time. We first evaluate the results of breakthrough experiments for zeolite 13X. Then, we use the results obtained to design a dynamic mathematical model to predict the breakthrough curve profile. Experimental results show that zeolite 13X possesses high adsorption capacities (over 10 % of its weight at adsorption temperatures of 293 K and below), as expected. The mathematical simulation was accurate at predicting the breakthrough onset time; however, this prediction accuracy declined with the outlet CO2 concentration exceeding 75 %, which is discussed. The sensitivity analysis indicated that the choice of different estimates of mass transport and bed porosity, as well as the choice of numerical scheme, can lead to a more accurate prediction, but the same set of parameters is not suitable for all process conditions.

1 September 2021 in Progress in Nuclear Energy
Verified
Journal Article
Closed access
MSMarek Staf
Marek Staf
DTDaniel Tenkrát
Daniel Tenkrát
THTomáš Hlinčík
Tomáš Hlinčík

26 June 2023 in Chemical Papers
Verified
Journal Article
Open access
PDF file
MSMarek Staf
Marek Staf
VKVeronika Kyselová
Veronika Kyselová
The study focuses on laboratory testing of carbon-dioxide adsorption. It compares three methods used to determine the capacity of the adsorbents proposed for CO2 capture. The tests have been performed on two samples, namely natural clinoptilolite and a 13X molecular sieve. Two methods were dynamic and one was static. The first dynamic method evaluated the capacity based on the change in CO2 volume fraction before and after a fixed-bed adsorber. For the same purpose, the second dynamic method used a gravimetric procedure. The static method detected a change in pressure during CO2 adsorption. The capacities determined for carbon-dioxide mole fractions of 5, 10, 13 and 20% at temperatures of 30 and 40 °C at atmospheric pressure were compared. The apparatus with a fixed-bed adsorber made it possible to perform tests also for overpressures of 2 and 5 bar and lower temperatures. The capacity obtained on the three apparatuses showed good agreement. The maximum capacity (3.32 mmol g−1) was determined for the 13X sample at 10 °C and a partial CO2 pressure of 120 kPa and, conversely, the lowest (0.12 mmol g−1) for clinoptilolite at 40 °C and a partial CO2 pressure of 5 kPa. There was no significant difference in capacity standard deviations between the apparatus (0.014–0.036 mmol g−1). The fixed-bed apparatus required one to three orders of magnitude more gas for the experiment and was more challenging to operate and evaluate the data.

21 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
MSMarek Staf
Marek Staf
VŠVít Šrámek
Vít Šrámek
MPMichael Pohořelý
Michael Pohořelý
The study focuses on the two-stage process of the thermal treatment of waste hemp shives aimed at obtaining a carbonaceous adsorbent. In the first stage, pyrolysis was carried out in a retort apparatus, which, at temperatures in the range of 450–850 °C, provided approximately 22.6–29.9% of the solid residue, 31.6–34.0% of the condensate, and 38.5–43.4% of gas with respect to the charge. The organic part of the condensates showed the net calorific value of 30.8–31.3 MJ kg−1, which makes it well suited for energy purposes. In the separated pyrolysis gases, GC-TCD-FID determined only five compounds, namely carbon dioxide, carbon monoxide, hydrogen, methane, and ethane, which together accounted for 98.5–99.8% of the gas volume. The remainder was composed mainly of ethene, propane, and propene. The highest net calorific value (14.7–14.8 MJ m−3) was exhibited by the gas collected in the range of 450–650 °C, which can be advantageously used for energy purposes. Non-activated solid pyrolysis residues had relatively low specific surface areas (BET), with the highest value determined being 294 m2 g−1. Therefore, they were activated by steam in a separate apparatus in the temperature range of 740–900 °C. The activation apparatus operated with a batch reactor of similar design to the pyrolysis retort. The activation increased the specific surface area of the pyrolysis residues up to the maximum of 915 m2 g−1. This study discusses the significant trends in specific surface area and total pore volume caused by a combination of different pyrolysis and activation temperatures. Better results were generally obtained for residues pyrolyzed at lower temperatures and then activated at high temperatures. The structure of the activated products mostly contained pores with a diameter of < 6 nm. Their development was mainly facilitated by the activation temperature of 850 °C, resulting in the relative presence of these pores in the range of 57.9–59.1%. All activated products were also characterized by an increased proportion of 20–80 nm pores, which formed, however, approximately one-third in comparison with the pores < 6 nm. Last but not least, the study also discusses the effect of activation conditions on the process loss of the product.