In this study, breakage behavior of three different coals in a laboratory impact crusher was investigated. The laboratory impact crusher carrying three rows of hammers is rotating at 2,840 rpm driven by a 1.1 kW motor. In the evaluation of crushers, t-family curves obtained from pendulum and drop weight test methods are frequently used. It is a known fact that there are many difficulties and problems in these tests. In this study, a new model was developed by t-family value evaluation and Bond grindability approach and the model was tested. As a result, the validity of the model was proved by a high regression value (r2 = 0.945).
Since the particle size, shape, specific surface area, and purity of the ground calcium carbonate (GCC) decide its usability in the paper, paint, and plastic industries, the effect of grinding is important. However, the effect of stirred and ball mill grinding on the particle shape of GCC by dynamic image analysis (DIA) is still lacking in the literature. Therefore, the aim of this study is to compare the aspect ratio at the same fineness (d97 = 50 μm) and evaluate other properties such as color, and surface area of GCC particles by stirred and ball mill grindings. DIA results showed that particles produced by the ball mill had higher aspect ratio values than those by the stirred mill. This was attributed to the impact, and attrition breakage modes produced by the ball and stirred mill, respectively. This conclusion is supported by XRD and SEM. Finally, the results related to physical properties such as aspect ratio, surface area, and whiteness are discussed depending on the usage area of GCC.