The main objective of this unmanned ground vehicle is to deal with the security issues like terrorist activities across the border and in various remote combat missions by reducing the involvement of soldiers. This unmanned ground robot comprises a wireless high-definition camera that can transfer live streams from the robot to headquarters using Wi-Fi. The robot’s movement can be controlled with two modes; one of them is a radio controller working on 2.4 GHz frequency with seven independent channels. Secondly, its movement can also be controlled using a Python-based GUI application. Nowadays, different techniques have been used for face recognition; in our remotely piloted robot, we have used Haar-cascade classifiers in combination with the LBPH algorithm to implement real-time facial recognition. The robot uses a rack and pinion driving mechanism and an ATMEL Cortex-M3 CPU as a controller with 32-bit/s processing speed. In addition, a laser is installed on the turret to shoot the targets down, which can be used in an autonomous mode based on facial recognition results, or it can be used manually either through an RF controller or Python-based GUI. The turret moves in 2-DOF with the help of metallic geared servo motors. Both servo motors can rotate up to 180°. The driving mechanism of the robotic tank is just like DDR, with one difference, the two DC gear motors of the robot are connected diagonally.
The majority of people with disabilities in the world have impairments that affect their lower bodies. In most of these cases, it was found that the affected persons upper body was in good health and capable of carrying out all activities; however, the spinal cord injury results in significant health challenges with body functions like urination, bowel movements, heart rate, and respiratory, cardiovascular, and sexual function, which require prompt medical treatment and mobility aids. This study presents the mechanical layout of a wheelchair that can switch between a sitting and a standing position. The center of gravity must be taken into account when creating an electric standing wheelchair. It is designed specifically for people with disabilities to lessen the need of outside assistance, allowing the disabled person to savour a sense of adoration. In the simulation, the electric standing wheelchair analysis is carried out by loading with a human weight of 40 and 100kg, and the transformation angle is adjusted between 0 and 90 degrees to compare the center of gravity displacement. SolidWorks and ANSYS are used to design the prototype, assemble the product, and establish the safety factor bounds of the structure and capabilities as required. The research focuses to achieve control of speed deviation and acceleration using a fuzzy control technique. The Arduino oversees the operation of the drive system as a controller, and a linear actuator is utilized for standing and sitting positions. This method is affordable, easily constructed, and highly secure.