The efficient and timely removal of organic matter and nutrients from water used in normal municipal functions is considered to be the main task of wastewater treatment plants (WWTPs). Therefore, these facilities are considered to be essential units that are required to avoid pollution of the water environment and decrease the possibility of triggering eutrophication. Even though these benefits are undeniable, they remain at odds with the high energy demand of wastewater treatment and sludge processes. As a consequence, WWTPs have various environmental impacts, which can be estimated and categorized using Life Cycle Assessment (LCA) analysis. In this study, a municipal WWTP based in Poznań, Poland, was examined using the method defined in ISO 14040. ReCiPe Endpoint and Midpoint (v1.11), in a hierarchical approach, were used to evaluate the environmental impacts regarding 18 different categories. All calculations were conducted using a detailed database from 2019, which describes each chosen facility. It was found that the energy component, related to the wastewater treatment process demand and electricity production, is the main determinant of the sum of the environmental impact indicators in light of the modelled energy mix. Therefore, it determines the entire process as an environmentally friendly activity.
This paper presents research on Fe and Mn removal from groundwater. In treatment systems of aeration followed by rapid filtration (no chemical dosage), manganese removal is possible due to the manganese dioxide catalyst present on the grains of filtration material. The goal of the presented research was to find a correlation between the catalyst layer’s composition as well as its internal porosity and the effectiveness and stability of manganese removal in the filtration process. In order to establish the influence of catalyst characteristics on manganese removal effectiveness, the filtration experiment was conducted using filtration materials with catalytic contact layers of different origin. Oxide coated auto-activated silica sand and Gabon manganese ore were tested. Inactive silica sand was used as reference. The results of filtration experiments were combined with analyses of chemical composition, internal porosity, and crystalline parameters of catalyst contact layers of grains. For the determination catalyst contact layer parameters, the following methods were used: Raman spectroscopy, X-ray powder diffractometry (XRD), Scanning Electron Microscope – Energy dispersive spectroscopy (SEM-EDAX), nitrogen adsorption. Pilot scale research on the filtration process demonstrated that auto-activated filtration material was characterized by the highest efficiency of manganese removal and stability of effects during the whole research. The effectiveness of Gabon manganese ore dropped from 90% and stabilized on the level of ca. 60% within 15 days of the experiment.
23 June 2014 in Journal of Water Supply: Research and Technology—AQUA
Information concerning the use of non-ionic surfactants (NS) in household products is very scanty. Therefore, a qualitative determination of NS in raw sewage is an alternative source of information concerning the presence and manufacture of NS. The aim of this work was to identify NS in raw sewage (in Poznan and Blonie, both Poland) and treated sewage (in Blonie) and to compare the results with those obtained for river water (Warta in Poznan, Poland). LC-MS/MS was used for this purpose. The presence of 116 ethoxamers, being exclusively polydispersal alcohol ethoxylates (AE) containing alkyl moieties from C10 to C16 and C18, as well as 20 poly(ethylene glycols), was confirmed in the raw sewage, while 68 ethoxamers were found in the treated sewage, including 12 octylphenol ethoxylates. No nonylphenol ethoxylates were identified in the raw or treated sewage.