Hussain Hussain

Dr. Hussain Hussain

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2020 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
HHHussain Hussain
Hussain Hussain
Current control in vector controlled PMSM drives is essential for the overall drive performance. Various current controller structures and design methods are commonly implemented in the literature, many of which are special cases of a generalized two-degrees-of-freedom (2DOF) PI controller. In this paper, design methods for the parameters of a 2DOF PI current controller are reviewed and a general design is proposed. The controller could be designed using the general method for independent zero and poles placement achieving completely decoupled d-q dynamics. Moreover, a tuning approach for minimal settling time and noise sensitivity is proposed. The proposed and existing designs are compared in terms of reference tracking, disturbance rejection, noise sensitivity, and robustness against variation in machine parameters. The proposed method results in an improved disturbance rejection. Simulation results verified the performance and robustness of the proposed design. A 1 kW motor drive is used to validate the design experimentally.

7 September 2023 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
AAAli Alenezi
Ali Alenezi
HHHussain Hussain
Hussain Hussain
Photovoltaic (PV) systems are one of the key solutions to face the increasing energy demand and climate change. PV elements are commonly connected in series to obtain the required voltage. PV strings suffer from severe power reduction when a mismatch occurs. A mismatch can occur because of partial shading, uneven dust, unequal tilt angles, or degraded modules. Differential Power Processing (DPP) is used in PV systems to minimize energy conversion losses while optimizing the PV power during mismatch. One way to implement DPP is using the PV-bus DPP architecture, where each DPP converter is connected between a PV element and the collective bus. The total processed power in the PV-bus system depends on the substring current. Analytically, the substring current has a unique operating point to achieve the least processed power (LPP) through all DPP converters. This article presents a new method to control the substring current for achieving LPP in the PV-bus system. The proposed control method does not require an extra string converter and is based on controlling the existing DPP converters with a single-stage inverter. Different mismatch levels are analyzed to show that the proposed system can reach LPP, significantly reducing the total processed power. Simulation and experimental results were performed to validate the effectiveness of the proposed method.

12 January 2023 in Electronics
Verified
Journal Article
Open access
PDF file
Jelena LoncarskiJelena Loncarski
Jelena Loncarski
HHHussain Hussain
Hussain Hussain
Alberto BelliniAlberto Bellini
Alberto Bellini
Power electronics, as an enabling technology in most renewable energy systems, is gaining attention as the penetration of renewable energy sources increases. Wide-bandgap power electronics are of particular interest due to their superior voltage blocking capabilities and fast switching speeds. They can viably be considered in the renewable energy sources, especially as the penetration of wind energy is expected to increase by a great extent in the upcoming years. In this paper, a comparison of Silicon Carbide-based and Silicon-based wind energy conversion systems has been performed, as it is crucial in understanding the benefits of adopting wide-bandgap-based solutions at a commercial level. For this analysis, a 2 MW permanent magnet synchronous generator-based wind conversion system with a bidirectional full-scale frequency converter comprised of two back-to-back inverters is considered. The efficiency, cost, and total volume of the passive components comparison have been conducted for Silicon- and Silicon Carbide-based converters. The comparison presented is a fair comparison, meaning that the converters are designed with modules of the same power ratings. Wind energy systems are compared both for the same switching frequency (low switching frequency suitable for IGBT modules) and also considering a Silicon Carbide-MOSFET-based converter working at high switching frequencies. The comparison is performed in PLECS simulation tool, using the PLECS libraries for different modules obtained from the manufacturers’ experimental data. The results show the benefits of using the Silicon Carbide-based converter when it comes to volume reduction in the passive components and provide insights to what is missing in order to achieve overall system volume and cost savings.

25 April 2023 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
DMDoha Mostafa
Doha Mostafa
HHHussain Hussain
Hussain Hussain
A magnetic lead screw (MLS) is a device that utilizes the magnetic field of permanent magnets to convert between linear and rotational motions while achieving the gearing action simultaneously. This offers a conversion between high-speed low-torque rotational motion to low-speed high-force translational motion. This paper provides a comprehensive review of works on MLSs describing the state-of-the-art designs and various manufacturing aspects. Moreover, the main approaches for computing the thrust force and torque of MLSs are presented along with an analysis of the main parameters and factors which affect the performance of the MLS. Furthermore, machine integration and control are discussed as well. Finally, various types of MLSs were designed based on 3-D finite element analysis and a comparative study between the different types is presented.

27 June 2024 in IEEE Access
Verified
Journal Article
Open access
HHHussain Hussain
Hussain Hussain
JLJelena Loncarski
Jelena Loncarski
LRLeposava Ristić
Leposava Ristić
Alberto BelliniAlberto Bellini
Alberto Bellini
The green goals imposed by many countries and the increasing application of renewable energy systems are bringing power electronics to the center of attention. Of particular interest are the wide band-gap devices, as they offer important benefits when considering the efficiency increase and volume reduction. Consequently, they can be viably adopted in renewable energy sources. In this paper, a 2 MW Doubly Fed Induction Generator (DFIG) based Wind Energy Conversion System (WECS) with a bidirectional partial-scale frequency converter composed of two back-to-back converters is considered. The main contribution of the paper is a result of comprehensive comparisons conducted for the two systems: DFIG WECS based on a Si-IGBT converter and DFIG WECS based on a SiC-MOSFET converter in terms of efficiency, volume, and cost. The performed comparison is also a fair comparison, being the selected modules are of the same power ratings. In this way, the previously unspecified but valuable decision-making process regarding the selection of power electronic modules suitable for DFIGs is facilitated. The thermal analysis has been implemented in PLECS, together with the converter control. The realistic libraries obtained from the manufacturers have been included for different power modules. The findings highlight the advantages of employing the Silicon Carbide-based converter in terms of minimizing the size and cost of passive components. They also offer insights on what is needed in order to make the Silicon Carbide solution the absolute best candidate.

17 June 2025 in IEEE Access
Verified
Journal Article
Open access
ZAZainab M. Almesri
Zainab M. Almesri
HHHussain Hussain
Hussain Hussain
RKRashad M. Kamel
Rashad M. Kamel
This study investigates the Low Voltage Ride-Through (LVRT) capabilities of grid-connected photovoltaic (PV) systems, focusing on the comparative performance of Grid-Following (GFL) and Grid-Forming (GFM) converters under current limit constraints. The two converters are designed to improve grid integration using systematic methodologies to ensure high performance and are compared under various grid fault conditions. A detailed model of the overall grid-connected PV system is first developed, including the PV array with its parameters extracted from the datasheet, Maximum Power Point Tracking (MPPT) algorithm, power converter topology, modulation technique, converter control structure (GFM or GFL) and the filter. The GFM converter employs a PQ droop control strategy. In contrast, the GFL converter utilizes conventional control techniques using a cascaded control structure along with the phase-locked loop (PLL) to synchronize the injected current with the grid voltage. The study evaluates the performance of both converters under several grid fault scenarios, considering current limit constraints imposed by the PV system and converter ratings. While GFM converters can enhance grid stability in weak grids due to their autonomous voltage and frequency regulation, the results demonstrate that GFL converters can exhibit superior performance under certain conditions, particularly when current limitations significantly impact the GFM converter’s response. Conversely, GFM converters demonstrate faster clearance times in specific scenarios, highlighting their potential advantages in dynamic stability. Using MATLAB/Simulink simulations, this research provides valuable insights into the impact of current limitations on the LVRT performance of both GFL and GFM converters across varying grid strengths, characterized by Short Circuit Ratio (SCR) and Grid Impedance Ratio (GIR), enabling the selection of the most suitable converter topology for specific grid conditions.