The advancement in water treatment technology has revolutionized the progress of membrane bioreactor (MBR) technology in the modern era. The large space requirement, low efficiency, and high cost of the traditional activated sludge process have given the necessary space for the MBR system to come into action. The conventional activated sludge (CAS) process and tertiary filtration can be replaced by immersed and side-stream MBR. This article outlines the historical advancement of the MBR process in the treatment of industrial and municipal wastewaters. The structural features and design parameters of MBR, e.g., membrane surface properties, permeate flux, retention time, pH, alkalinity, temperature, cleaning frequency, etc., highly influence the efficiency of the MBR process. The submerged MBR can handle lower permeate flux (requires less power), whereas the side-stream MBR can handle higher permeate flux (requires more power). However, MBR has some operational issues with conventional water treatment technologies. The quality of sludge, equipment requirements, and fouling are major drawbacks of the MBR process. This review paper also deals with the approach to address these constraints. However, given the energy limitations, climatic changes, and resource depletion, conventional wastewater treatment systems face significant obstacles. When compared with CAS, MBR has better permeate quality, simpler operational management, and a reduced footprint requirement. Thus, for sustainable water treatment, MBR can be an efficient tool.

A microbial fuel cell (MFC) is a system that can generate electricity by harnessing microorganisms’ metabolic activity. MFCs can be used in wastewater treatment plants since they can convert the organic matter in wastewater into electricity while also removing pollutants. The microorganisms in the anode electrode oxidize the organic matter, breaking down pollutants and generating electrons that flow through an electrical circuit to the cathode compartment. This process also generates clean water as a byproduct, which can be reused or released back into the environment. MFCs offer a more energy-efficient alternative to traditional wastewater treatment plants, as they can generate electricity from the organic matter in wastewater, offsetting the energy needs of the treatment plants. The energy requirements of conventional wastewater treatment plants can add to the overall cost of the treatment process and contribute to greenhouse gas emissions. MFCs in wastewater treatment plants can increase sustainability in wastewater treatment processes by increasing energy efficiency and reducing operational cost and greenhouse gas emissions. However, the build-up to the commercial-scale still needs a lot of study, as MFC research is still in its early stages. This study thoroughly describes the principles underlying MFCs, including their fundamental structure and types, construction materials and membrane, working mechanism, and significant process elements influencing their effectiveness in the workplace. The application of this technology in sustainable wastewater treatment, as well as the challenges involved in its widespread adoption, are discussed in this study.

Electronic waste (e-waste) contains a variety of electronic components e.g., metals, non-metals, plastics, cables, etc. The excessive generation of e-waste has become a significant concern in the last few decades. The current global e-waste generation is 57.4 million metric tons (MMT) per year. Asia produces the highest amount of e-waste (24.9 MMT) followed by America, Europe, Africa, and Oceania. In Bangladesh, e-waste produces from two sources: its own consumption of electronic devices, which is 0.6 MMT, and imported e-waste from ship breaking yards that is 2.5 MMT in 2021. However, inadequate information on the current state of e-waste generation and management systems in Bangladesh has created a void to establish the future direction for proper handling of e-waste. In this work, the Bangladesh perspective of e-waste has been analyzed. The environmental, health economical forfeiture of e-waste has been discussed. The development of government legislations regarding e-waste have been stated. The establishment of e-waste management has been designed by the life cycle assessment (LCA) and material flow analysis (MFA) models. Moreover, a holistic approach for understanding the possible hazards, the economic feasibility of e-waste processing and viable management models for e-waste in Bangladesh was endeavored in this work to propose systematic future directions and recommendations to improve the current e-waste scenario of Bangladesh.