In this paper we present an extensive theoretical and numerical analysis of monolithic high-index contrast grating, facilitating simple manufacture of compact mirrors for very broad spectrum of vertical-cavity surface-emitting lasers (VCSELs) emitting from ultraviolet to mid-infrared. We provide the theoretical background explaining the phenomenon of high reflectance in monolithic subwavelength gratings. In addition, by using a three-dimensional, fully vectorial optical model, verified by comparison with the experiment, we investigate the optimal parameters of high-index contrast grating enabling more than 99.99% reflectance in the diversity of photonic materials and in the broad range of wavelengths.

Terahertz and infrared radiation have unique properties applicable to the field of surveillance and security systems. We investigated the possibility of detecting potentially dangerous objects covered by various types of clothing using passive imagers operating at 1.2 mm (250 GHz) and long-wavelength infrared at 6–15 μm (20–50 THz). We developed a measurement methodology that assumes to investigate theoretical limitations, performance of imagers, and physical properties of fabrics. To evaluate stability of the detection capabilities of imagers, we performed measurement sessions each lasting 30 min. We present a theoretical comparison of the two spectra and results of experiments using state-of-the-art equipment.

Low-loss nematic liquid crystal mixtures with low temperatures of nematic-to-isotropic phase transition are tested at terahertz frequencies. Experimental results show that through control of ambient temperature, the thermally induced transmittance’s tunability of quartz transducers infiltrated with these mixtures can change of up to 4% for 0.9 THz. Thermally tunable devices based on soft matter may find applications in next-generation modulation and switching components operating in the terahertz regime.

We built a high-speed TDS setup with the use of electronically controlled optical sampling (ECOPS), which can measure up to 1600 terahertz pulses per second. The movement of the sample was provided by two fast-speed motorized linear stages constituting the gantry. We developed a flat-bar-based metal marker approach for the synchronization of continuous line-by-line scans. We carefully compared the performance of the terahertz reflection time-domain spectroscopy (TDS) scanner operating in a slow point-by-point and a one-hundred-times faster line-by-line imaging scheme. We analyzed images obtained for both schemes for a uniform metallic breadboard with holes, as well as a glass composite sample with defects. Although the measurement time was reduced by 100 times in terms of the line-by-line scheme, the overall performance in both schemes was almost identical in terms of the defects’ sizes, shapes and locations. The results proved that the proposed ECOPS TDS system can provide uniform and extremely fast scanning without any deterioration in image quality.

We present results on the comparison of different THz technologies for the detection and identification of a variety of explosives from our laboratory tests that were carried out in the framework of NATO SET-193 THz technology for stand-off detection of explosives: from laboratory spectroscopy to detection in the field under the same controlled conditions. Several laser-pumped pulsed broadband THz time-domain spectroscopy (TDS) systems as well as one electronic frequency-modulated continuous wave (FMCW) device recorded THz spectra in transmission and/or reflection

In terahertz (THz) optical systems, polymer-based manufacturing processes are employed to ensure product quality and the material performance necessary for proper system maintenance. Therefore, the precise manufacturing of system components, such as optical elements, is crucial for the optimal functioning of the systems. In this study, the authors investigated the impact of various 3D printing parameters using fused deposition modeling (FDM) on the optical properties of manufactured structures within the THz radiation range. The measurements were conducted on 3D printed samples using highly transparent and biocompatible cyclic olefin copolymer (COC), which may find applications in THz passive optics for “in vivo” measurements. The results of this study indicate that certain printing parameters significantly affect the optical behavior of the fabricated structures. The improperly configured printing parameters result in the worsening of THz optical properties. This is proved through a significant change in the refractive index value and undesirable increase in the absorption coefficient value. Furthermore, such misconfigurations may lead to the occurrence of defects within the printed structures. Finally, the recommended printing parameters, which improve the optical performance of the manufactured structures are presented.