The current work demonstrates an innovative approach to develop nanocellulose based membranes via in situ TEMPO functionalization of the thin functional layer of cellulose nanocrystals (CNC_BE) to enhance the metal ion adsorption capacity.

Copper is a major problem in industrial wastewater streams, seriously affecting the quality of potential drinking water. Several approaches, including continuous membrane processes or batch-wise application of adsorbents, are in use to tackle this problem. Unfortunately, these processes suffer from their particular drawbacks, such as low permeance or disposal of saturated adsorbents. However, a combination of these processes could constitute a step towards a more efficient copper removal solution. Here, we present a nanopaper ion-exchanger prepared from cellulose nanofibrils produced from fibre sludge, a paper industry waste stream, for the efficient, continuous removal of copper from aqueous solutions. This nanopaper ion-exchanger comprises phosphorylated cellulose nanofibrils that were processed into nanopapers by papermaking. The performance of these phosphorylated nanopaper membranes was determined with respect to their rejection of copper and permeance. It was shown that this new type of nanopaper is capable of rejecting copper ions during a filtration process by adsorption. Results suggest that functional groups on the surface of the nanopapers contribute to the adsorption of copper ions to a greater extent than phosphate groups within the bulk of the nanopaper. Moreover, we demonstrated that those nanopaper ion-exchangers could be regenerated and reused and that in the presence of calcium ions, the adsorption capacity for copper was only slightly reduced.

Bamboo fibers are utilized for the production of various structures, building materials, etc. and is of great significance all over the world especially in southeast Asia. In this study, the extraction of microcrystalline cellulose (MCC) was performed using bamboo fibers through acid hydrolysis and subsequently different characterizations were carried out using various advanced techniques. Fourier transform infrared (FTIR) spectroscopy analysis has indicated the removal of lignin from MCC extracted from bamboo pulp. Scanning Electron Microscopy (SEM) revealed rough surface and minor agglomeration of the MCC. Pure MCC, albeit with small quantities of impurities and residues, was obtained, as revealed by Energy Dispersive X-ray (EDX) analysis. X-ray diffraction (XRD) indicates the increase in crystallinity from 62.5% to 82.6%. Furthermore, the isolated MCC has slightly higher crystallinity compared to commercial available MCC (74%). The results of thermal gravimetric analysis (TGA) demonstrate better thermal stability of isolated MCC compared to its starting material (Bamboo fibers). Thus, the isolated MCC might be used as a reinforcing element for the production of green composites and it can also be utilized as a starting material for the production of crystalline nanocellulose in future.