Underground void subsidence hazards, especially mine goaf, have now become one of the major social problems affecting the well-being of civilians and development in China. The objective of this study was to propose a kind of strong thixotropic engineering slurry and filling treatment for use in underground void subsidence hazards. The optimal agent ratio for thixotropic cement slurry/mortar was obtained by indoor tests, where the rheological agent is 7.5% compared to the weight of cement, the water–solid ratio is in the range of 0.7~0.8, and the aeolian sand ratio can be 0~1.5 times that of cement. The rheological properties of slurry and mortar were tested using a Brookfield RST-SST rheometer. The results show that aeolian sand can be used as thixotropic cement mortar for a backfilling treatment for underground voids (mine goaf). The static yield stress increases non-linearly compared to existing thixotropic models. The stress decays sharply with shearing (the shear rate is more or less 10 s−1) and then the stress increases with the increase in shear rate (the shear rate is more than 10 s−1). The increase in the stress of the slurry is greater than in the mortar. A natural logarithmic function between yield stress and rest time (only 1 parameter), an exponential function with two parts for stress–shear rate (a rheology model, with only 3 parameters), and an exponential function for the accumulation law (only 2 parameters) were proposed in turn.
A core concern in the research on deep geological disposal of high-level radioactive waste is the migration of radionuclides in geological bodies. Most studies on radionuclide migration consider the role of only the rock fissures without incorporating the influence of the rock matrix. In this paper, the rock mass for geological disposal of high-level radioactive waste is regarded as a fissure-pore medium. Considering the influences of radionuclide diffusion and fluid transport on radionuclide migration in the process of disposal, the governing equation of radionuclide migration and evolution in the pore-fissure medium is established. The numerical scheme of the governing equation is given based on the mixed finite volume method (FVM), using our program solution module written in C++. On this basis, the numerical test model with fissures was developed, which analyzed the radionuclide migration law in clayey rocks under various fissure and rock matrix diffusion coefficients and hydraulic conductivities. The simulation results are compared with finite element method results, revealing the superiority of the mixed FVM method in solving problems of radionuclide migration in discontinuous geological bodies containing hiatuses, mutations, and fissures. The study provides a theoretical basis for evaluating the safety, feasibility, and suitability of geological disposal repositories for high-level radioactive waste in terms of radionuclide migration.