This research delves into the design, modeling, and finite element impact analysis of the segmented sandwich composite armor system subjected to impact loading, considering different parameters such as materials to be used, armor height, and armor design configuration. Initial studies were performed to select the ideal model that will provide the best impact resistance at the least weight and with minimal fabrication requirements. Material type, thickness, and overall model configuration were defined during the initial model development period. Once the final design was defined, finite element analysis was performed using 2017 ABAQUS software to observe the performance of the model and to validate the efficiency of the chosen armor. Based on the results from the material selection and thickness validation, the optimal design with the best impact resistance was noted as 1.2 mm thick rectangular segmented silicon carbide tiles, serving as the top layer that covers the three-level gradient core composed of a titanium metal honeycomb frame filled with silicon carbide inserts, and finally a 2 mm thick glass epoxy composite layer made from four laminas in a 0/45/90/-45-degree configuration serving as the last layer of the armor.
22 March 2024 in Journal of Reinforced Plastics and Composites
In this research, a multi-layered composite armor was introduced by combining ceramics, fiber-reinforced composite and metal alloy with the aim of making the armor capable of resisting ballistic impact. A model was developed in ABAQUS/Explicit to predict the impact performance of armor in different scenarios. A thinner version of the proposed structure was manufactured, and experiments were conducted. Data were collected and analyzed including initial and residual velocity and absorbed kinetic energy. The experiments and simulations showed similarities in how the materials response to the ballistic impact. It was found that the thickness of each component contributes to the total ballistic resistance of the whole structure. By putting 20 mm thick Boron carbide layer in front layer, armor structure can absorb more kinetic energy than having 10 mm thick Boron carbide front layer. The sequence order of layers also affected the protection of armor structure. If the front layer is Kevlar/epoxy, armor structure cannot withstand multi-hit attacks because of significant delamination in these layers. Also, the Boron carbide core that had Kevlar/epoxy layer in the front was more shattered than the Boron carbide front layer that had Kevlar/epoxy as the core layer. By applying cohesive layers between Kevlar/epoxy layers, the displacement of fibers in the bonded composite layers was equal to 68% of the displacement of fibers in the unbonded Kevlar/epoxy layers. Also, the multi-layer structure with bonded Kevlar/epoxy layers exerted more stress on projectile after impact compared to structure with unbonded Kevlar/epoxy layers.
Human’s protection has been an important issue since the beginning of creation. Throughout the recorded history, there have been various types of materials that are utilized as protection garments from injury such as in battle and other dangerous situations. There are several armor solutions for effective ballistic protection by using advanced alloys, ceramics and composite