This study presents an experimental study on making through and blind holes on Inconel 718 by hole drilling electrical discharge machining process. Several holes of Ø2 mm were drilled at specific levels of process parameters using tubular brass electrodes having different channel configurations. Machining performances were analyzed on the basis of material removal and electrode wear. Measurements of depth, diameter, overcut, and taper of holes were performed based on scanning electron microscope photographs to evaluate geometrical and dimensional accuracies of drilled holes. Surface roughness measurements as well as energy-dispersive X-ray analyses were conducted to examine characteristics of machined hole surfaces. The research reveals that drilling holes using multichannel electrodes exhibit superior results in aspects of lower drilling time, better dimensional accuracy, and improved surface quality.
This study presents experimental and numerical investigation on the effectiveness of electrode geometry on flushing and debris removal in Electrical Discharge Drilling (EDD) process. A new electrode geometry, namely side-cut electrode, was designed and manufactured based on circular electrode geometry. Several drilling operations were performed on stainless steel 304 using rotary tubular electrodes with circular and side-cut geometries. Drilling performance was characterized by Material Removal Rate (MRR), Electrode Wear Rate (EWR), and Tool Wear Ratio (TWR). Dimensional features and surface quality of drilled holes were evaluated based on Overcut (OC), Hole Depth (HD), and Surface Roughness (SR). Three-dimensional three-phase CFD models were built using ANSYS FLUENT software to simulate the flow field at interelectrode gap. Results revealed that the overall performance of side-cut electrode was superior due to improved erosion rates and flushing capabilities, resulting in production of deep holes with good dimensional accuracy and surface quality.
14 February 2024 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
This study presents a comprehensive experimental investigation for utilization of ultrasonic vibrations on the formability of materials in deep drawing process. For this purpose, a novel die system was designed, constructed, and mounted on an in-house developed servo press. The developed system enables application of high-frequency vibrations at various amplitude levels onto the blank holder in axial direction. Conventional and ultrasonically assisted cup drawing experiments were carried out on cold-rolled low carbon steel sheets of DC01 and DC04 using crank and soft motion scenarios with application of three levels of preloading under dry and lubricated surface conditions. The effects of process parameters on limiting drawing ratio (LDR), cup depth, and forming load were analyzed and compared for conventional and ultrasonically assisted drawing operations. The results revealed that application of ultrasonic vibrations in deep drawing significantly improved LDR and cup depth with considerable reduction in forming load, regardless of amplitude level of vibrations, amount of blank holder force, motion scenario, material type or surface condition. Under certain processing conditions, increase in LDR by up to 17% and cup depth by up to 50% with reduction in forming load by up to 32% was achieved with implementation of ultrasonic vibrations by means of the developed die system. Graphical abstract
21 June 2022 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Bu çalışmada, Geleneksel Derin Çekme Yöntemi'nde sac metal malzemelerin şekillendirilebilirliğini iyileştirebilmek adına Ultrasonik Destekli Derin Çekme Yöntemi geliştirilmiştir. Derin çekme işleminde baskı plakasına eksenel yönde uygulanan ultrasonik titreşimlerin malzemenin şekillendirilebilirliğine etkileri sonlu elemanlar analizleriyle nümerik olarak araştırılmış, elde edilen sonuçlar derin çekme deneyleriyle doğrulanmıştır. Nümerik çalışmada, zamana bağlı yapısal ve şekillendirme analizlerini içeren iki aşamalı sonlu elemanlar analizini içeren metodoloji geliştirilmiştir. Geleneksel ve ultrasonik destekli derin çekme analizlerinde, belirli işlem parametrelerine maruz kalan DC01 ve DC04 malzemelerin sınır çekme oranları ve maksimum çekilebilir kupa derinlikleri kıyaslanmıştır. Ultrasonik titreşimlerin etkisiyle sınır çekme oranında %9’a, kupa derinliğinde ise %26’ya varan artış sağlanmıştır. Aynı çapa sahip dairesel malzemeler üzerinde gerçekleştirilen analizlerde, sac malzemedeki incelmenin %43’e varan oranda azaldığı tespit edilmiştir. Doğrulama deneyleri neticesinde sınır çekme oranında ve kupa derinliğindeki artış oranları ise sırasıyla %11 ve %31 olarak gerçekleşmiştir. Ultrasonik titreşimlerin dinamik darbe, gerilme süperpozisyonu ve temas ayrılması etkileri, önerilen yöntemle sonlu elemanlar analizlerinde etkin bir şekilde modellenebildiğinden nümerik analiz sonuçlarının deneysel sonuçlarla iyi bir uyum içinde olduğu görülmüştür. Buradaki küçük farkların, ultrasonik titreşimlerin malzeme üzerindeki akustik yumuşatma ve sürtünme katsayısını azaltma etkilerinin nümerik modele aktarılamamasından kaynaklandığı düşünülmektedir.
Machining of WC material presents a challenge due to its specific properties, particularly high hardness and brittleness. The Electrical Discharge Drilling (EDD) process is preferred for the production of small-diameter holes on difficult-to-cut materials. This study presents an experimental investigation of the effects of tool electrode geometry and material on the drilling performance and hole accuracy of WC-26%Co. Blind holes were produced under specific process conditions using tubular electrodes made of brass and copper, featuring single and multiple channels. The Material Removal Rate (MRR) and Electrode Wear Rate (EWR) were measured as process outputs to evaluate the impact of electrode material and geometry on drilling performance. Hole accuracy was also assessed based on the shape of drilled holes as well as enlargement in hole diameter, referred to as Overcut (OC). The set of experiments with utilization of each geometry and channel configuration of tool electrode were repeated for three times, and the results indicated good reliability. Compared to the single-channel electrode, the central protrusion at the hole center was significantly eliminated with the use of the multi-channel electrode, resulting in improved drilling performance as well as the achievement of an accurate hole shape. Among the average values of results from all sets of experiments, the multi-channel brass electrode provided the highest MRR (74.31 mg min−1), EWR (30.57 mg min−1), and OC (20.60%) with an accurate shape. Furthermore, the surfaces of holes drilled by multi-channel electrodes are relatively cleaner and more uniform due to less pronounced surface anomalies.