Mehmet Erkan Erkan Kütük

Dr. Mehmet Erkan Erkan Kütük

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 September 2018 in Tehnički glasnik
Verified
Journal Article
Open access
PDF file
MKMehmet Erkan Erkan Kütük
Mehmet Erkan Erkan Kütük
LDLale Canan Tokuz Dülger
Lale Canan Tokuz Dülger
MAMurat Artan
Murat Artan
An optimization study with kinetostatic analysis is performed on hybrid seven-bar press mechanism. This study is based on previous studies performed on planar hybrid seven-bar linkage. Dimensional synthesis is performed, and optimum link...

13 March 2019 in Mechanical Sciences
Verified
Journal Article
Open access
PDF file
MKMehmet Erkan Erkan Kütük
Mehmet Erkan Erkan Kütük
LDLale Canan Dülger
Lale Canan Dülger
MDMemik Taylan Daş
Memik Taylan Daş
This paper presents a new exoskeleton design for wrist and forearm rehabilitation. The contribution of this study is to offer a methodology which shows how to adapt a serial manipulator that reduces the number of actuators used on exoskeleton design for the rehabilitation. The system offered is a combination of end-effector- and exoskeleton-based devices. The passive exoskeleton is attached to the end effector of the manipulator, which provides motion for the purpose of rehabilitation process. The Denso VP 6-Axis Articulated Robot is used to control motion of the exoskeleton during the rehabilitation process. The exoskeleton is designed to be used for both wrist and forearm motions. The desired moving capabilities of the exoskeleton are flexion–extension (FE) and adduction–abduction (AA) motions for the wrist and pronation–supination (PS) motion for the forearm. The anatomical structure of a human limb is taken as a constraint during the design. The joints on the exoskeleton can be locked or unlocked manually in order to restrict or enable the movements. The parts of the exoskeleton include mechanical stoppers to prevent the excessive motion. One passive degree of freedom (DOF) is added in order to prevent misalignment problems between the axes of FE and AA motions. Kinematic feedback of the experiments is performed by using a wireless motion tracker assembled on the exoskeleton. The results proved that motion transmission from robot to exoskeleton is satisfactorily achieved. Instead of different exoskeletons in which each axis is driven and controlled separately, one serial robot with adaptable passive exoskeletons is adequate to facilitate rehabilitation exercises.

9 April 2025 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
SOSadık Olguner
Sadık Olguner
ABAli Tolga Bozdana
Ali Tolga Bozdana
MKMehmet Erkan Erkan Kütük
Mehmet Erkan Erkan Kütük
This study presents a comprehensive experimental investigation for utilization of ultrasonic vibrations on the formability of materials in deep drawing process. For this purpose, a novel die system was designed, constructed, and mounted on an in-house developed servo press. The developed system enables application of high-frequency vibrations at various amplitude levels onto the blank holder in axial direction. Conventional and ultrasonically assisted cup drawing experiments were carried out on cold-rolled low carbon steel sheets of DC01 and DC04 using crank and soft motion scenarios with application of three levels of preloading under dry and lubricated surface conditions. The effects of process parameters on limiting drawing ratio (LDR), cup depth, and forming load were analyzed and compared for conventional and ultrasonically assisted drawing operations. The results revealed that application of ultrasonic vibrations in deep drawing significantly improved LDR and cup depth with considerable reduction in forming load, regardless of amplitude level of vibrations, amount of blank holder force, motion scenario, material type or surface condition. Under certain processing conditions, increase in LDR by up to 17% and cup depth by up to 50% with reduction in forming load by up to 32% was achieved with implementation of ultrasonic vibrations by means of the developed die system. Graphical abstract

21 November 2022 in Scientia Iranica
Verified
Journal Article
Open access
PDF file
MKMehmet Erkan Erkan Kütük
Mehmet Erkan Erkan Kütük
LDLale Canan Tokuz Dülger
Lale Canan Tokuz Dülger
Dimensional synthesis of mechanisms to trace given points is an important issue in mechanism and machine science. Having no exact solution makes this issue an optimization problem. This study offers an optimization approach for the dimensional synthesis of planar mechanisms. Four-bar mechanisms having one degree of freedom (DOF) are chosen as the configurations. The proposed method is implemented by establishing the objective functions with specified constraints and searching for the results by using an optimization algorithm. Genetic Algorithm (GA) in Optimization Toolbox-Matlab® is selected as a solver. Different types of four-bar mechanisms like crank-rocker and double-crank including different target points are performed. Mechanisms are depicted by resulted parameters and a Matlab® script prepared plays their animations. As a result, it is proved that the mechanisms whose dimensional properties are obtained by the GA solver have a good tracing capability for the desired paths. This study has the property of being a design guide. Its application is not limited to four bar mechanism. Planar mechanisms with different configurations can be easily synthesized by using this technique.

7 June 2019
Verified
Book Chapter
Closed access
PDF file
MKMehmet Erkan Erkan Kütük
Mehmet Erkan Erkan Kütük
LDL. Canan Dülger
L. Canan Dülger
MDmemik das
memik das

31 December 2021 in International Journal of Pure and Applied Sciences
Verified
Journal Article
Closed access
AKAli Kiliç
Ali Kiliç
MKMehmet Erkan Erkan Kütük
Mehmet Erkan Erkan Kütük
SKSadettin Kapucu
Sadettin Kapucu
Bir problemin yenilikçi/yaratıcı çözümlerinin bulunabilmesi için en önemli adım problem tanımının yeniden düzenlenmesidir. Problem tanımını verildiği gibi alıp kullanmak, problem çözücünün bakış açısını kısıtladığı gibi tamamen yanlış yola da yönlendirebilir. Bununla birlikte çelişki içeren yenilikçilik ve yaratıcılık gerektiren problemlerdeki çelişkileri belirlemek zor olabilmektedir. Bu çalışmada, problem tanımının düzenlenmesine ve çelişkilerin belirlenmesine yönelik geliştirilmiş olan ‘problemi yeniden tanımlama’ algoritmasının endüstride karşılaşılan ‘taşıma sırasında ortaya çıkan palet devrilme’ sorununa uygulanması sunulacaktır. Problemin yeniden nasıl ifade edileceğinden ve bunun için izlenen süreçten bahsedilecektir. Elde edilen yeniden tanımlamalar ile çözüme erişmek için kullanılabilecek TRIZ yöntemleri önerilecektir.