In order to effectively carry out the heavy overload monitoring and maintenance of public transformers in the distribution network, ensure the reliability of the distribution network power supply, and improve customer satisfaction with electricity consumption, this paper presents a short-term heavy overload forecasting method for public transformers based on the LSTM-XGBOOST combined model. The model extracts heavy overload feature variables from four dimensions, including basic parameter information, weather, time, and recent load, and constructs a short-term second highest load prediction model based on the LSTM algorithm to obtain the predicted value of the second highest load rate. After aggregating the heavy overload feature variables and the predicted second highest load rate, the XGboost algorithm is employed to construct a short-term heavy overload prediction model for public transformers to judge whether the public transformers display heavy overload. The test results show that this method has high accuracy in short-term heavy overload forecasting, and can effectively assist in the key monitoring and control of heavy overload in public transformers.
Modular multilevel converters (MMCs) have been utilized in solid-state transformers (SSTs). With the increasing demand in high-voltage power module in MMC-SST, press-pack IGBTs are very promising. The poly-ether-ether-ketone (PEEK) frame is utilized in the submodules of press-pack IGBT to withstand the high voltage. The electric field simulation in this paper reveals that electric field concentrates on the surface of the PEEK frame. Thus, the surface partial discharge characteristics under direct current (DC) voltage is investigated by the developed test bench. The results show that surface partial discharge model of PEEK sample has polarity effect. Under positive and negative polarity voltage, the average discharge quantity, maximum discharge quantity and discharge repetition rate of the PEEK sample all increase with the voltage amplitude. Moreover, the front time of the surface partial discharge waveform reaches 20 ns, and its frequency spectrum is concentrated in range of 10–20 MHz.
24 October 2023 in IEEE Transactions on Industry Applications
In this paper, a family of Ladder multi-resonant switched-capacitor converters (MRSCC) is proposed to deal with the issues of a high transient current spike, inherent capacitor charge sharing loss, hard-switched operation, and inability for lossless voltage regulation for traditional Ladder switched-capacitor converters (SCC). By incorporating a multi-resonant core (MRC) and adopting the on-time fixed frequency modulation, a “charge balance” state with overlapped resonant currents is introduced. Consequently, the conversion ratio of the Ladder MRSCC can be regulated continuously, widely, and efficiently, even at light load conditions. In addition, all transistors achieve zero-current-switching (ZCS) turn-on, and all diodes obtain ZCS turn-off. The complete soft-charging operation between capacitors is obtained, eliminating the high transient current spike and charge-sharing loss effectively. In addition, the synchronous Ladder MRSCC with a clamp circuit is proposed to further eliminate the high-frequency ringing and reduce the conduction loss, which makes it potentially applicable to compact applications, including power supplies for portable devices and panel-level photovoltaic systems. A comprehensive analysis of different operation modes, boundary conditions, component stress, topology implementation, and topology comparison is presented to assist converter operation and hardware design. A 55W prototype with the 3X Ladder MRSCC was developed to verify the effectiveness of the proposed topology, modulation strategy, and circuits.
13 December 2023 in IEEE Transactions on Industry Applications
This paper proposes a universal modeling method and a reactive power optimization strategy for phase-shift modulated resonant switched-capacitor converters (RSCs). Compared with the previous steady-state modeling method, only the node voltage between the resonant tanks is needed and the analysis process for different operation states is no longer required. Furthermore, the universal model reflects not only the steady-state characteristics but also the frequency characteristics of phase-shift-modulated RSCs, which can be used to analyze the reactive power directly. In order to minimize the reactive power and thus improve the overall efficiency, an optimized modulation strategy by adopting enumerated algorithm is presented with the help of the proposed universal modeling method. An experimental prototype was built to verify the validity of the model and the effectiveness of the optimized phase-shift modulation strategy.
Low-current arcs in axially blown gases exhibit distinct features in their arc column size and temperature distribution, notably featuring multiple inflection points in the radial temperature profile. This work introduces a simplified theoretical framework, avoiding the complexity of full computational fluid dynamics models, to explain the physical mechanisms that govern the shape of the radial temperature profile. Quantitative analysis identifies that the temperature dependence of the product of gas density and specific heat capacity is the dominant factor governing profile formation under low-current conditions. Based on this finding, a predictive method is developed that uses this key gas property to estimate temperature profiles. The predicted profiles show close agreement with published experimental data, and the estimated arc column sizes reproduce observed trends in published results regarding thermal interruption capability. The proposed method provides a practical and computationally efficient tool for evaluating and selecting gases for high-voltage gas circuit breakers according to their arc-cooling performance.
In view of the high impact of extreme disasters, this paper comprehensively evaluates power grid performance from a new low-carbon toughness perspective. First, considering the increase in carbon emissions and the recovery time of carbon emissions, low-carbon resilience indicators are proposed. At the same time, considering the power-regulation effect of the phase-shifter transformer, the fault and response model of a power grid under an ice disaster is established, and then, a comprehensive evaluation index system of low-carbon toughness of the power grid is constructed. The weight determination is carried out using the fuzzy analytic hierarchy process-entropy-based weight method, while the fuzzy comprehensive evaluation center of gravity method is used to evaluate the power grid comprehensively. Finally, examples are presented to verify the feasibility of the proposed method, emphasizing its potential for evaluating the comprehensive performance of low-carbon and toughness of the power grid in the future.