Mohd Fazaulnizam Bin Shamsudin

Dr. Mohd Fazaulnizam Bin Shamsudin

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
SMSara Alsheikh Mahmoud
Sara Alsheikh Mahmoud
HHHuzaifa Hashim
Huzaifa Hashim
MSMohd Fazaulnizam Bin Shamsudin
Mohd Fazaulnizam Bin Shamsudin
HMHamza Alsheikh Mahmoud
Hamza Alsheikh Mahmoud
Traditional Malay houses are a significant part of Malay cultural heritage. They depict local culture, customs, and philosophy and symbolize national identity. As a tourism-based facility, traditional Malay houses contribute to the growth of the economic and tourism sectors in Malaysia. Over time, Malay houses have deteriorated owing to human and natural factors. Modernization and urbanization also threaten the existence of Malay houses. These factors, along with the 2030 Sustainable Development Goals, are the main drivers for Malay houses preservation. The aim of this study is to investigate the state of the art in the preservation of traditional Malay houses through a critical review of current practices and challenges. The results show that considerable efforts have been made by different parties to preserve Malay houses. However, the preservation of Malay houses has neither reached a comprehensive status nor achieved the desired goals. For holistic preservation of Malay houses, a multidimensional preservation approach is recommended, in which engineering and technology, socioeconomic, planning, and management dimensions are all addressed simultaneously, consistent with sustainability principles and local objectives. This study identifies key areas where strategic support and improvements are needed to meet the desired outcomes in traditional Malay houses preservation. These include challenges and aspects overlooked in current practices. Therefore, the study findings can be used by policy and decision makers to guide the planning and management of traditional Malay houses preservation. It also contributes to knowledge translation in practice by discussing current preservation practices and recommending a potential preservation approach. This study highlights future research directions.

8 June 2024 in Buildings
Verified
Journal Article
Open access
PDF file
HTHerman Bin Tawil
Herman Bin Tawil
CTChee Ghuan Tan
Chee Ghuan Tan
NSN.H. Ramli Sulong
N.H. Ramli Sulong
Fadzli Mohamed NazriFadzli Mohamed Nazri
Fadzli Mohamed Nazri
MSMohd Fazaulnizam Bin Shamsudin
Mohd Fazaulnizam Bin Shamsudin
NBNorazura Muhamad Bunnori
Norazura Muhamad Bunnori
Precast concrete sandwich wall panels (PCSPs) are popular for building exteriors due to their high thermal efficiency, composite performance, and low manufacturing and maintenance costs. Researchers have investigated the possibility of reducing the panel thickness while maintaining the cladding components’ thermal efficiency and strength to further improve efficiency and to reduce material consumption. However, limited research has been conducted on the shear bonding of steel plates, which is critical to ensuring durability and energy efficiency. This study investigated the shear behaviour of PCSPs with an S-type shear connector (SSC) through nine push-off tests and non-linear finite element modelling using Abaqus. Parametric studies were carried out to investigate the influence of the geometric properties of the SSC, the yield strength of the steel and the insulation thickness. The results suggest that the maximum secant stiffness for SSCs was achieved at a width of 101.4 mm and a thickness of 2 mm. Therefore, it is recommended that the width of the SSCs be limited to this value or less. Furthermore, the study found that increasing the yield strength of the steel beyond a thickness of 2 mm and a width of 101.4 mm did not improve the results and had a negative impact on the secant stiffness of the SSCs.

5 January 2023 in Materials
Verified
Journal Article
Open access
PDF file
Ahmed Mohamed SayedAhmed Mohamed Sayed
Ahmed Mohamed Sayed
HAHani Alanazi
Hani Alanazi
AAAref A. Abadel
Aref A. Abadel
YAYousef Alharbi
Yousef Alharbi
MSMohd Fazaulnizam Bin Shamsudin
Mohd Fazaulnizam Bin Shamsudin
Damage occurring to steel element structures is highly possible due to tearing ruptures, corrosion, or the adoption of sudden loads. The damage has a great effect on their capacity to bear load and the corresponding elongation, as well as the distribution of the stresses in the cross-section of the element. Therefore, in the present research, experimental tests were carried out on 15 specimens of channel steel elements with different damage ratios in the unconnected legs and at different locations along the element’s length. Through the test, the load and the corresponding elongation values were obtained for the control and damaged specimens. From the study of the different variables, it was demonstrated that the damage location does not significantly affect the load capacity, with a maximum difference of 1.9%. With the presence of the damage in only one leg at a ratio of less than or equal to 40%, the prediction of the value of the loss in the load is within the safe limit. However, if this ratio increases, there is a defect in calculating the loss in the load as it is greater than the effect of the damage. If there is any damage in the two legs of the channel together, the prediction of the loss of load is within the safe limit, where the loss is less than the effect of the damage ratio. We propose a model that can predict the capacitance of the axial load of steel channel elements through identifying the ratio of damage in the unconnected leg.

20 July 2026 in International Journal of Pavement Research and Technology
Verified
Journal Article
Open access
PDF file
TKTeba Tariq Khaled
Teba Tariq Khaled
ZQZaynab I. Qasim
Zaynab I. Qasim
Saif AlzabeebeeSaif Alzabeebee
Saif Alzabeebee
MSMohd Fazaulnizam Bin Shamsudin
Mohd Fazaulnizam Bin Shamsudin
MIMohd Rasdan Ibrahim
Mohd Rasdan Ibrahim
Rwayda Al HamdRwayda Al Hamd
Rwayda Al Hamd
In recent years, there has been a growing interest to use colored asphalt pavement as an alternative to improve the aesthetic appeal, safety, environmental effects, and functional performance of road surfaces. This alternative approach seeks to relieve heat accumulation in urban areas compared to rural areas by reflecting sunlight and reducing heat absorption, exacerbated by the phenomenon well-known as urban heat island (UHI). Therefore, the colored asphalt pavement supports sustainable urban planning by counteracting the UHI effect by using less heat-absorbing materials like iron oxide (yellow or red) and incorporating it with asphalt mixtures to increase reflection of sunlight and reduce heat retention, thus, it positively affects the rutting deformation (RD). In light of these considerations, this paper aims to study the performance of colored asphalt pavements and their influence on urban heat island mitigation. To meet these requirements, two types of modified asphalt binders distinguished by (olive green and dark maroon) colors were prepared by incorporating iron oxide (yellow or red) at (5%) as a percentage of the asphalt weight as an addendum to pure asphalt, and the following steps were taken. Initially, the mechanical properties of colored asphalt mixtures were obtained using a thorough investigation and compared with the conventional asphalt mixture to assess their strength and performance after adding colored iron oxides. Subsequently, the verification extended to evaluating their durability against moisture damage and severe weather conditions and the extent of color stability in the asphalt mixtures. Finally, it is embarked on verifying whether the use of colored asphalt mixtures had a significant impact on mitigating temperature effect, helping to reduce the UHI effect, enhancing surface reflection, and improving the dynamic stability (DS) and rutting deformation (RD). Based on the results obtained, the performance of the asphalt mixtures was significantly enhanced after using modified asphalt binders distinguished by (olive green and dark maroon) colors. Specifically, and colored asphalt mixtures (M-Olive Green and M-Dark Maroon) improved the rutting deformation (RD) by roughly 20% and 10% and 42%, 31% as well enhanced the dynamic stability (DS) approximately 8%, 27% and 25%, 63% at temperatures 40˚C and 60˚C, while increased the durability index (DI) about 21% and 28%, besides alleviated the temperature effect range of 4 °C to 7 °C respectively compared to the reference asphalt mixture (M-Ref).

1 March 2025 in Journal of Engineering and Sustainable Development
Verified
Journal Article
Open access
PDF file
AAAhmed Aljubory
Ahmed Aljubory
TKTeba Tariq Khaled
Teba Tariq Khaled
AKAli Jabbar Kadhim
Ali Jabbar Kadhim
MSMohd Fazaulnizam Bin Shamsudin
Mohd Fazaulnizam Bin Shamsudin
AMAndrew Minto
Andrew Minto
Rwayda Al HamdRwayda Al Hamd
Rwayda Al Hamd
The objective of this paper is to evaluate the maintenance strategies applied to the Latifiya-Musayib highway section to improve the pavement condition that significantly deteriorated due to military operations during and after the third Gulf War. The functional evaluation measured the Pavement Condition Index (PCI) every five years. The measurement relied on a visual survey of the pavement surface by examining different types of distress that varied in severity. PCI values measured from 2005 to 2015 indicated that the pavement surface could be considered satisfactory according to standard and custom PCI rating scales, while results measured in 2020 indicated that PCI values had declined to a critical stage requiring maintenance. PCI was 63% for the Latifiya-Musayib direction and 65.5% for the opposite direction. Therefore, preventive maintenance was carried out to stop this decline, which improved PCI values by 18.5% and 19.4%, respectively. The pavement performance curve created to evaluate the effectiveness of preventive maintenance showed that the pavement life would be extended by 4 years in the Latifiya-Musayib direction and 9 years in the opposite direction. Finally, measuring the PCI at the end of the assumed pavement's design life is recommended to make the best decision.