Crumb rubber modification has been proven to enhance the properties of pure bitumen. This paper looks at some of the international standards for producing crumb rubber modified bitumen (CRMB) and reviews the effect of crumb rubber to the rheology of crumb rubber modified bitumen. The review shows that the rheology of CRMB depends on internal factors such as crumb rubber quantity, particle size, and pure bitumen composition, and external factors such as the mixing time, temperature, and also the modification technique. These factors govern the swelling process of crumb rubber particles that lead to the increase of viscosity of the modified bitumen. However, the mixing temperature and duration can cause rubber particles to depolymerize and subsequently cause loss of viscosity. Crumb rubber modification also improves the properties of bitumen by increasing the storage and loss modulus and enhancing the high and low temperature susceptibility. The effect of crumb rubber to aging properties of CRMB is also discussed. Finally several techniques of chemical modification to terminal blends of CRMB and the subsequent improvement to the settling property of CRMB are explained.

One effective method to minimize the increasing cost in the construction industry is by using coal bottom ash waste as a substitute material. The high volume of coal bottom ash waste generated each year and the improper disposal methods have raised a grave pollution concern because of the harmful impact of the waste on the environment and human health. Recycling coal bottom ash is an effective way to reduce the problems associated with its disposal. This paper reviews the current physical and chemical and utilization of coal bottom ash as a substitute material in the construction industry. The main objective of this review is to highlight the potential of recycling bottom ash in the field of civil construction. This review encourages and promotes effective recycling of coal bottom ash and identifies the vast range of coal bottom ash applications in the construction industry.

Semi-flexible pavement surfacing is a composite pavement that utilizes the porous pavement structure of the flexible bituminous pavement, which is subsequently grouted with appropriate cementitious materials. This study aims to investigate the compressive strength, flexural strength, and workability performance of cementitious grout. The grout mixtures are designed to achieve high strength and maintain flow properties in order to allow the cement slurries to infiltrate easily through unfilled compacted skeletons. A paired-samplet-test was carried out to find out whether water/cement ratio, SP percentages, and use of silica fume influence the cementitious grout performance. The findings showed that the replacement of 5% silica fume with an adequate amount of superplasticizer and water/cement ratio was beneficial in improving the properties of the cementitious grout.

The Effect of Digital Count-Down Display on Signalized Junction Performance

The utilisation of reclaimed asphalt pavement (RAP) as a suitable substitute for natural aggregate and binder offers an energy-saving and cost-effective approach to enhance the performance of asphalt mix. Realising the potential use of RAP as a promising recycling technique, many countries are seeking to recycle RAP as part of the global effort to address the rising challenge of climate change and contribute to a sustainable environment. This study aimed to develop an integrated approach to determine the amount of RAP to be used in an asphaltic concrete wearing course with 14 mm nominal maximum aggregate size (ACW14). The RAP was incorporated with two waste materials comprising waste engine oil (WEO) as a rejuvenator and Crumb Rubber (CRM) as a binder modifier. A total of five different mixes, which include R0 (control mix), R30, R50, R70, and R100 (replacement of 30%, 50%, 70%, and 100% of RAP aggregates in the mix, respectively) were evaluated. The Marshall parameters, resilient modulus (M_R), indirect tensile fatigue, moisture susceptibility, and mass loss (ML) tests were conducted to investigate the performance of each mix. Finally, an arbitrary scale was developed to optimise the RAP content. The results showed that the Marshall parameters, moisture susceptibility, and ML values of the RAP mixes met the criteria outlined in the standard. According to the M_R performance, the R50, R70, and R100 mixes were more resilient than the R0. In terms of fatigue resistance, the R30, R50, and R70 mixes showed better performance than the R0. Overall, the collective performance of all RAP mixes was above the R0 and it increased with the increment of RAP content. Therefore, it was possible to design ACW14 mixes with up to 100% RAP in combination with WEO and CRM.

In the design stage of construction projects, determining the soil permeability coefficient is one of the most important steps in assessing groundwater, infiltration, runoff, and drainage. In this study, various kernel-function-based Gaussian process regression models were developed to estimate the soil permeability coefficient, based on six input parameters such as liquid limit, plastic limit, clay content, void ratio, natural water content, and specific density. In this study, a total of 84 soil samples data reported in the literature from the detailed design-stage investigations of the Da Nang–Quang Ngai national road project in Vietnam were used for developing and validating the models. The models’ performance was evaluated and compared using statistical error indicators such as root mean square error and mean absolute error, as well as the determination coefficient and correlation coefficient. The analysis of performance measures demonstrates that the Gaussian process regression model based on Pearson universal kernel achieved comparatively better and reliable results and, thus, should be encouraged in further research.