Energy autonomy and conformability are essential elements in the next generation of wearable and flexible electronics for healthcare, robotics and cyber-physical systems. This study presents ferroelectric polymer transducers and organic diodes for imperceptible sensing and energy harvesting systems, which are integrated on ultrathin (1-µm) substrates, thus imparting them with excellent flexibility. Simulations show that the sensitivity of ultraflexible ferroelectric polymer transducers is strongly enhanced by using an ultrathin substrate, which allows the mounting on 3D-shaped objects and the stacking in multiple layers. Indeed, ultraflexible ferroelectric polymer transducers have improved sensitivity to strain and pressure, fast response and excellent mechanical stability, thus forming imperceptible wireless e-health patches for precise pulse and blood pressure monitoring. For harvesting biomechanical energy, the transducers are combined with rectifiers based on ultraflexible organic diodes thus comprising an imperceptible, 2.5-µm thin, energy harvesting device with an excellent peak power density of 3 mW·cm⁻³.

Based on the powerful concept of embedded dipole self‐assembled monolayers (SAMs), highly conductive interfacial layers are designed, which allow tuning the contact resistance of organic thin‐film transistors over three orders of magnitude with minimum values well below 1 kΩ cm. This not only permits the realization of highly competitive p‐type (pentacene‐based) devices on rigid as well as flexible substrates, but also enables the realization of n‐type (C₆₀‐based) transistors with comparable characteristics utilizing the same electrode material (Au). As prototypical examples for the high potential of the presented SAMs in more complex device structures, flexible organic inverters with static gains of 220 V/V and a 5‐stage ring‐oscillator operated below 4 V with a stage frequency in the range of the theoretically achievable maximum are fabricated. Employing a variety of complementary experimental and modeling techniques, it is shown that contact resistances are reduced by i) eliminating the injection barrier through a suitable dipole orientation, and by ii) boosting the transmission of charge carriers through a deliberate reduction of the SAM thickness. Notably, the embedding of the dipolar group into the backbones of the SAM‐forming molecules allows exploiting their beneficial effects without modifying the growth of the active layer.

An ultra-thin natural-source-based cellulose derivate is used in a bilayer gate dielectric for organic complementary inverters. Extraordinarily high small-signal gains up to 1600, a very sharp transition region (as low as 40 mV), a full rail-to-rail swing, a balanced noise margin of 92.5%, and “long-time” stability are shown, revealing that these inverters are highly suitable for complex circuit designs.

Bottom‐contact architectures with common electrode materials such as gold are crucial for the integration of 2D semiconductors into existing device concepts. The high contact resistance to gold—especially for bottom contacts—is, however, a general problem in 2D semiconductor thin‐film transistors. Pyrimidine‐containing self‐assembled monolayers on gold electrodes are investigated for tuning the electrode work functions in order to minimize that contact resistance. Their frequently ignored asymmetric and bias‐dependent nature is recorded by Kelvin probe force microscopy through a direct mapping of the potential drop across the channel during device operation. A reduction of the contact resistances exceeding two orders of magnitude is achieved via a suitable self‐assembled monolayer, which vastly improves the overall device performance.

• Low operation voltage oTFT with ultrathin photopatternable polymer gate dielectric. • Intrinsically UV-crosslinkable without the usage of any photoinitiator. • Low leakage current in the range of 10−6 A cm−2 at 1 MV cm−1. • Very low interface trap density in the range of 5 × 1011 cm−2 eV−1. • Transistor performance is stable upon UV-irradiation and wet chemical development.

The thin-film transistor (TFT) is a popular tool for determining the charge-carrier mobility in semiconductors, as the mobility (and other transistor parameters, such as the contact resistances) can be conveniently extracted from its measured current-voltage characteristics. However, the accuracy of the extracted parameters is quite limited, because their values depend on the extraction technique and on the validity of the underlying transistor model. We propose here a new approach for validating to what extent a chosen transistor model is able to predict correctly the transistor operation. In the two-step fitting approach we have developed, we analyze the measured current-voltage characteristics of a series of TFTs with different channel lengths. In the first step, the transistor parameters are extracted from each individual transistor by fitting the output and transfer characteristics to the transistor model. In the second step, we check whether the channel-length dependence of the extracted parameters is consistent with the underlying model. We present results obtained from organic TFTs fabricated in two different laboratories using two different device architectures, three different organic semiconductors and five different materials combinations for the source and drain contacts. For each set of TFTs, our approach reveals that the state-of-the-art transistor models fail to reproduce correctly the channel-length-dependence of the transistor parameters. Our approach suggests that conventional transistor models require improvements in terms of the charge-carrier-density dependence of the mobility and/or in terms of the consideration of uncompensated charges in the carrier-accumulation channel.