Department of Advanced Production Engineering, Engineering and Technology Institute Groningen, Faculty of Science and Engineering, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
Dr. Liqiang Lu
Department of Advanced Production Engineering, Engineering and Technology Institute Groningen, Faculty of Science and Engineering, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
This paper reports CuO-graphene layer-by-layer hybrid nanostructures by a fast microwave irradiation method. The CuO nanosheets or fusiform morphologies were obtained by varying the reaction temperature of microwave heating. These CuO nanostructures were uniformly dispersed on graphene nanosheets (GNS), forming layer-by-layer nanostructures after drying and stacking. CuO nanostructures were designed as the spacer to prevent the reassembly of GNS to graphite sheets so that the unique properties relative to few-layer graphene nanosheets (GNS) could be retained in the practical applications. When evaluated as anode materials for Li-ion batteries, the CuO-GNS composites showed substantially enhanced lithium-storage capacities compared to CuO materials and GNS, which has been attributed to the improvement of structure stability and electrical contact by GNS for a long time upon repetitive cycling.
This paper reports a cathode material of a graphene–sulfur film nanostructure synthesized by a facile wet chemical oxidation technique. The hybrid material is synthesized by using ferric chloride as an oxidizing agent and polysulfide as the sulfur source. The oxidizing agent FeCl3 is introduced as a soft film template to form a sulfur film on graphene oxide (GO). This is ascribed to the formation of a ferric cations double layer (FCDL) on the graphene oxide surface with many negative functional groups. Material characterizations reveal that GO is reduced to reduced graphene oxide (RGO) and the sulfur materials are embedded in a three dimensional conducting composite network of RGO and polyethylene glycol (PEG), forming a continuous sulfur film coating on RGO. When fabricated as a cathode material for rechargeable lithium ion batteries, the sulfur film-coated graphene composite electrode exhibits high capacity, improved Coulombic efficiency and extraordinarily stable cycling performance. It is believed that the sulfur film is coated on RGO and protected by the PEG network, and therefore the high solubility of the polysulfide anions formed as the reaction intermediate in the discharge and charge processes is relieved to a large extent. The electronic conductivity of insulating sulfur is also improved substantially in the RGO–S–PEG network.