The proposed surface‐mountable self‐isolated MIMO antenna covers n78 and n79 5G frequency bands. The presented design has two semicircular slots with engineered geometry to get the desired frequency spectrum. Antenna presents the bandwidth in the order of 8.77% and 2.81% at frequency resonance of 3.42 GHz and 4.98 GHz, respectively, covering FR1 5G and WLAN applications. The design presents an acceptable gain of 2.95 dBi and 2.42 dBi. The elements of MIMO antennas are kept an adequate distance apart to achieve self‐isolation in order of 19 dB. It aids further in achieving optimal MIMO diversity parameters. The 2D electrical size of the presented self‐isolated planar antenna is 0.97λ × 0.65λ at the lowest resonance. The MIMO antenna parameters were examined for the stated antenna design. The optimal envelope correlation coefficient (ECC) is near to 0.02, channel capacity loss (CCL) is around 0.2 bits/sec/Hz, directivity gain (DG) is around 9.98 dB, and the MEG ratios are near to unity. The computed performance of the resonator is validated through fabrication and experimentally tested using VNA 9912A in an anechoic chamber environment.
The power system for large-scale adoption of hybrid electric vehicles can benefit from a distributed reserve provided by the vehicle-to-grid (V2G) concept. This study suggests a V2G technology that can effectively control frequency on a microgrid throughout a 24-h cycle. When usage is at its lowest in the spring or fall, a microgrid is intended to be large enough to simulate a community of 2000 households. A 1:5 ratio of cars to households is realized by modelling 400 electric vehicles (EVs) as a basic model, indicating a typical case in the future. An in-depth analysis of the voltage, current, reactive, and active power is carried out for a microgrid. By coordinating control of diesel generation, renewable energy source (RES) generation, power exchange, and EV generation, the system frequency of a microgrid can be managed by regulating load demand with V2G devices. The proposed microgrid with V2G effectively manages energy and reduces the uncertain and variable nature of RES power generation with enhanced performance. System parameter variations have been investigated for various operating scenarios, and it has been discovered that error is confined to less than 5%.
An innovative battery management system (BMS) is crucial for verifying the credibility and safety of electric vehicles (EVs) and other electrical devices. The precise state of health (SOH) estimation of the Lithium-ion batteries (LIBs) holds great importance in a BMS. Battery SOH is often committed by the utilization of suitable data-driven approaches and metrics. This study presents an alternative approach for examining the SOH of batteries through the use of a gated recurrent unit (GRU) as an estimating method. Finally, the Oxford battery datasets is subjected to both training and testing procedures. The validity of the proposed method's adaptability is shown by tests managed to estimate the SOH of a battery cell. The performance of our proposed method is validated on the battery dataset of Oxford, where the average RMSE is 0.31%.Graphical Abstract—