Forward osmosis (FO) driven by osmotic pressure difference has great potential in water treatment. However, it remains a challenge to maintain a steady water flux at continuous operation. Herein, a FO and photothermal evaporation (PE) coupling system (FO‐PE) based on high‐performance polyamide FO membrane and photothermal polypyrrole nano‐sponge (PPy/sponge) is developed for continuous FO separation with a steady water flux. The PE unit with a photothermal PPy/sponge floating on the surface of draw solution (DS) can continuously in situ concentrate DS by solar‐driven interfacial water evaporation, which effectively offsets the dilution effect due to the injected water from FO unit. A good balance between the permeated water in FO and the evaporated water in PE can be established by coordinately regulating the initial concentration of DS and light intensity. As a consequence, the polyamide FO membrane exhibits a steady water flux of 11.7 L m^–2 h^–1 over time under FO coupling PE condition, effectively alleviating the decline in water flux under FO alone. Additionally, it shows a low reverse salt flux of 3 g m^–2 h^–1. The FO‐PE coupling system utilizing clean and renewable solar energy to achieve a continuous FO separation is significantly meaningful for practical applications.

In the next twenty years, the scarcity of food shortage and drinking water will appear in Egypt due to the growth of industries and agriculture. This paper develops a conceptual design of the new technologies in the field of water–energy–food in new cities. Border lines are the internal relationship, external influence, and linkage system evaluation for WEF nexus. The major problems of using fossil energy in desalination are emissions and non-renewability, as well as the preference for dispersed freshwater production instead of concentrated output. The design of a desalination system that is integrated with renewable energies is critical these days. This type of system can also reduce the production of environmental pollutants due to reduced energy consumption and transfer of freshwater. GIS data from the United Nations have confirmed the existence of an underground reservoir in Wadi-Dara that can cultivate 1000 acres using smart farming techniques to reach a circular economy for an integrated solution between the water–energy nexus. The possibility of cultivating a hundred acres in Wadi-Dara on the Red Sea coast exists, through which about one million people could be settled. In this comprehensive review, we conducted a deep study in order to establish a sustainable integrated lifestyle in the Dara Valley region in terms of the availability of potable water, clean energy, and agriculture. Sustainable integrated solutions were conducted for seawater desalination using beach sand filtration wells as a pretreatment for seawater using renewable energy, e.g., wind energy (18% wind turbines), and photovoltaic panels (77% PV panels). Strategic food will be cultivated using smart farming that includes an open ponds cultivation system of microalgal cells to synthesis (5.0% of bio-fuel (. Aqua agriculture and aquaponics will cultivate marine culture and integrate mangrove, a shrimp aquaculture. A municipal waste water treatment is conceived for the irrigation of shrubby forests and landscapes. Mixotrophic cultures were explored to achieve a sustained ecological balance. Food, poultry and animal waste management, as well as a cooker factory, were included in the overall design. The environmental impact assessment (EIA) study shows a low risk due to anticipated net zero emissions, a 75% green city, and optimal waste recycling. This research assists in combining research efforts to address the challenging processes in nexus research and build resilient and sustainable water, energy, and food systems.

Hydroxyapatite (HAp) and hydroxyapatite-based materials show promising potential in the healthcare sector due to their distinctive properties such as biocompatibility, antimicrobial efficacy, non-toxicity, and robust mechanical characteristics. This makes HAp materials play an important role in hindering infection spreading in healthcare provider institutions. This study assesses the antimicrobial efficacy of the developed hydroxyapatite-based composites incorporating copper, zinc, and silver nanoparticles. The synthesized HAp and its modified composite variants (Cu/HAp, Zn/HAp, and Ag/HAp) with varying ratios ranging from 0 to 15% (wt) were characterized using XRD, XPS, SEM, and TEM analyses. Furthermore, the antibacterial and antifungal properties of the synthesized HAp and HAp-based composites were evaluated. The antibacterial effectiveness of the HAp and its composites was evaluated using a modified disc diffusion test, where the resulting inhibition zones on the agar surface were observed. All the HAp and HAp-based composites (HAp, Cu/HAp, Zn/HAp, and Ag/HAp materials) elicited in the formation of inhibitory zones. The most substantial inhibition values were observed for the 5% Ag/HAp formulation, with values of 19.7 and 13.8, against E. coli and S. aureus, respectively. The 5% Ag/HAp concentration may strike an ideal balance, providing high antimicrobial activity without adverse effects on biocompatibility or material stability. These findings underscore the recommendation of the proposed HAp-based composites for infection control measures through their application on medical instruments, textiles, healthcare personnel attire, and patient garments.

The study examined the feasibility of utilizing the mixture of ceramic sludge and roller kiln wastes, to produce low-cost ceramic-based membranes designated for use in wastewater treatment applications. In recent years, the treatment of wastewater contaminated with humic acid has posed significant challenges due to its complex nature and resistance to conventional treatment methods. To improve the physical, mechanical, and filtration qualities of the membranes, the study involved preparing them using a blend of five distinct composition ratios of totally recycled ceramic sludge and roller kiln wastes, which were then sintered at temperatures ranging from 900 °C to 1300 °C. The most effective membrane showed the best permeate flux and humic acid separation efficiency for the wastewater samples when it was sintered at 1000 °C using only ceramic sludge waste. The produced membranes were thoroughly examined to reveal their structural and chemical characteristics. This confirmed the effective integration of functionalized multi-walled carbon nanotubes (f-MWCNTs) and their influence on the membranes’ functionality. f-MWCNTs were added to the membrane’s surface via wet impregnation and drop casting methods. This resulted in a notable improvement in the membrane’s humic acid separation efficiency, which increased to 92.61%, and the flux increased to 128.46 L/m²/h at a concentration of 100 mg L⁻¹ as well. The opportunity to develop effective and environmentally sustainable ceramic membranes for water treatment using industrial ceramic wastes is highlighted by this study.