In this study, a dislocation density-based model is introduced to analyze slip transmission across grain boundaries in polycrystalline materials. The method applies a combination of the misorientation of neighboring grains and resolved shear stress on relative slip planes. This model is implemented into a continuum dislocation dynamics framework and extended to consider the physical interaction between mobile dislocations and grain boundaries. The model takes full account of the geometry of the grain boundary, the normal and direction of incoming and outgoing slip systems, and the extended stress field of the boundary and dislocation pileups at the boundary. The model predicts that slip transmission is easier across grain boundaries when the misorientation angle between the grains is small. The modeling results are verified with experimental nanoindentation results for polycrystalline copper samples.
Although metallic materials with gradient microstructure exhibit notable performance in harsh environmental conditions, they can also exhibit unusual mechanical behaviour. This is attributed to both grain size and the gradient of grain size distribution in the structure. Metallic materials with a homogenous distribution of grain size follow the traditional Hall-Petch relationship, in which strength increases with decreasing grain size at the expense of ductility. However, studies show that materials with a gradient of grain size microstructure do not follow the Hall-Petch relationship, and thus have improved strength and ductility. This suggests that with creative design and engineering of microstructure, the strength-ductility trade-off can be reduced or prevented. In this study, we developed and implemented a dislocation density based model to investigate the mechanical behaviour of nano-microstructure. We designed a multi-scale modelling framework, coupling VPSC (Viscoplastic Self Consistent model) with CDD (Continuum Dislocation Dynamics), applying crystal plasticity equations to simulate dislocation interaction in polycrystalline metallic materials. We also developed design parameters and a model to predict the strength and ductility of materials with gradient microstructure.
Severely plastically deformed microstructures of pure copper were produced by subjecting cylindrical copper samples to high-pressure torsion. The effects of this procedure on introducing gradient microstructure and subsequent mechanical behavior were investigated by utilizing electron backscatter diffraction and performing Vickers hardness/tensile testing. A crystal plasticity-continuum dislocation dynamics modeling effort was performed to predict the mechanical performance of these samples. The model includes mechanisms based on the gradient of dislocation density and grain size, back stress fields of grain boundaries, dislocation density transmission across grain boundaries, and stress/strain gradient effects.