In this study, a dislocation density-based model is introduced to analyze slip transmission across grain boundaries in polycrystalline materials. The method applies a combination of the misorientation of neighboring grains and resolved shear stress on relative slip planes. This model is implemented into a continuum dislocation dynamics framework and extended to consider the physical interaction between mobile dislocations and grain boundaries. The model takes full account of the geometry of the grain boundary, the normal and direction of incoming and outgoing slip systems, and the extended stress field of the boundary and dislocation pileups at the boundary. The model predicts that slip transmission is easier across grain boundaries when the misorientation angle between the grains is small. The modeling results are verified with experimental nanoindentation results for polycrystalline copper samples.
Precipitation strengthening in nanostructured metallic multilayer (NMM) films of Cr/Cu–Cr was studied using nanoindentation and electron microscopy. Magnetron-sputtered NMM films having layer thicknesses of 10, 20 and 30 nm were prepared at room temperature (RT) and 100 °C. Some of the RT-deposited films were annealed at 100 °C for 30 min. Cr was introduced in the Cu–Cr layers by using a Cu–Cr target (95 at.% – 5 at.%) target. A significant increase in nanoindentation hardness was observed in the Cr/Cu–Cr. A reduction of hardness dependence on layer thickness was also observed in the Cr/Cu–Cr, such that sample having a layer thickness of 30 nm provides the equivalent strength of a 10/10 nm Cr/Cu. Uniformly distributed Cr particles in the Cu–Cr layers are key strengthening features in these new Cr/Cu–Cr NMM films. A single dislocation-based model was used to correlate the observed mechanical behaviours and microstructure. The model predicts similar trend observed from the experimental results, suggesting that the higher strength in Cr/Cu–Cr is likely the result of dislocation movement impediment due to Cr precipitates in the Cu–Cr layers.
1 February 2018 in Materials Science and Engineering: A