Diffuse optical tomography (DOT) is a biomedical imaging modality that can reconstruct hemoglobin concentration and associated oxygen saturation by using detected light passing through a biological medium. Various clinical applications of DOT such as the diagnosis of breast cancer and functional brain imaging are expected. However, it has been difficult to obtain high spatial resolution and quantification accuracy with DOT because of diffusive light propagation in biological tissues with strong scattering and absorption. In recent years, various image reconstruction algorithms have been proposed to overcome these technical problems. Moreover, with progress in related technologies, such as artificial intelligence and supercomputers, the circumstances surrounding DOT image reconstruction have changed. To support the applications of DOT image reconstruction in clinics and new entries of related technologies in DOT, we review the recent efforts in image reconstruction of DOT from the viewpoint of (i) the forward calculation process, including the radiative transfer equation and its approximations to simulate light propagation with high precision, and (ii) the optimization process, including the use of sparsity regularization and prior information to improve the spatial resolution and quantification.
In most multispectral optical-resolution photoacoustic microscopy (OR-PAM), spatial scanning is repeated for each excitation wavelength, which decreases throughput and causes motion artifacts during spectral processing. This study proposes a new spectroscopic OR-PAM technique to acquire information on the photoacoustic signal intensity and excitation wavelength from single spatial scans. The technique involves irradiating an imaging target with two broadband optical pulses with and without wavelength-dependent time delays. The excitation wavelength of the sample is then calculated by measuring the time delay between the photoacoustic signals generated by the two optical pulses. This technique is validated by measuring the excitation wavelengths of dyes in tubes. Furthermore, we demonstrate the three-dimensional spectroscopic OR-PAM of cells stained with suitable dyes. Although the tradeoff between excitation efficiency and excitation bandwidth must be adjusted based on the application, combining the proposed technique with fast spatial scanning methods can significantly contribute to recent OR-PAM applications, such as monitoring quick biological events and microscale tracking of moving materials.
The image reconstruction for diffuse optical tomography (DOT) employing a regularization method that minimizes entropy of the reconstructed optical property distribution was proposed to improve the contrast and noise robustness. We demonstrated the performance of the entropy regularization as compared to the l1-norm and l2-norm regularizations with numerical simulations and a phantom experiment. The entropy regularization provided the reconstructed images with improved contrast with artifacts caused by measurement noise suppressed. Our results indicate that entropy regularization has a potential to improve DOT imaging.
1 October 2006 in The Journal of Prosthetic Dentistry