The emerging wearable electronics integrated into textiles are posing new challenges both in materials and micro-fabrication strategies to produce textile-based energy storage and power source micro-devices. In this regard, inkjet printing (IJP) offers unique features for rapid prototyping for various thin-film (2D) devices. However, all-inkjet-printed capacitors were very rarely reported in the literature. In this work, we formulated a stable Ti3C2 MXene aqueous ink for inkjet printing current-collector-free electrodes on TPU-coated cotton fabric, together with an innovative inkjet-printable and UV-curable solvent-based electrolyte precursor. The electrolyte was inkjet-printed on the electrode’s surface, and after UV polymerization, a thin and soft gel polymer electrolyte (GPE) was obtained, resulting in an all-inkjet-printed symmetrical capacitor (a-IJPSC). The highest ionic conductivity (0.60 mS/cm) was achieved with 10 wt.% of acrylamide content, and the capacitance retention was investigated both at rest (flat) and under bending conditions. The flat a-IJPSC textile-based device showed the areal capacitance of 0.89 mF/cm2 averaged on 2k cycles. Finally, an array of a-IJPSCs were demonstrated to be feasible as both a textile-based energy storage and micro-power source unit able to power a blue LED for several seconds.
Calcium phosphate coatings have been widely used in orthopaedic and dental implants due to their excellent bioactivity and ability to promote formation of new bone tissue. Among the techniques used to manufacture these materials, electrochemical deposition has emerged as a promising method due to several benefits, such as improved compositional control, coating uniformity, versatility, and low cost. Moreover, the use of a pulsed current has proved to be an effective strategy to overcome electrochemical deposition’s major shortcomings. Herein, we provide an overview of the electrochemical deposition method, highlighting the benefits of the use of a pulsed current, as well as discussing the recent advances in the field. Overall, pulsed electrochemical deposition represents a promising approach for the production of high quality calcium phosphate coatings tailored for orthopaedic and dental implants.