Olexandr Kulikov

Mr. Olexandr Kulikov

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
Ivan PavlenkoIvan Pavlenko
Ivan Pavlenko
Olaf CiszakOlaf Ciszak
Olaf Ciszak
VKVladyslav Kondus
Vladyslav Kondus
ОRОleksandr Ratushnyi
Оleksandr Ratushnyi
Oleksandr IvchenkoOleksandr Ivchenko
Oleksandr Ivchenko
Vitalii IvanovVitalii Ivanov
Vitalii Ivanov
The reliability of pumping units at nuclear power plants (NPPs) is critical in terms of their energy efficiency and safety. Remarkably, WWER-1000 reactors at Ukrainian NPPs are equipped with outdated pumping units that have already served their full-service life. This fact leads to an urgent need to develop a new, more efficient pump. In the article, a promising pump, ACNA 600-35, was developed. It was designed to increase the energy efficiency of pumps TX 800/70/8-K-2E, applied at the holding pool and the industrial circuit of the nuclear reactor. Since these pumps should be imported from the monopoly suppliers, this affects both the energy efficiency of pumping equipment and the energy independence of Eastern Europe. The proposed pump ACNA 600-35 is characterized by an increased efficiency of up to 0.12–0.13 compared with the TX 800/70/8-K-2E pump. In general, the life cycle cost of the proposed pump is 15–20% lower than for the analog TX 800/70/8-K-2E. The design of the developed pump ACNA 600-35 and the related pumping unit based on its production at industrial facilities allows for further development of the industrial and fuel-energy complex, increasing the state’s energy independence and employment. According to expert estimates, the average economic effect from supplying the developed pump can reach 10 mln USD/year.

5 January 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Ivan PavlenkoIvan Pavlenko
Ivan Pavlenko
OKOlexandr Kulikov
Olexandr Kulikov
ОRОleksandr Ratushnyi
Оleksandr Ratushnyi
Vitalii IvanovVitalii Ivanov
Vitalii Ivanov
Ján PiteľJán Piteľ
Ján Piteľ
VKVladyslav Kondus
Vladyslav Kondus
Developing ways to increase centrifugal pumps’ pressure and power characteristics is a critical problem in up-to-date engineering. There are many ways to resolve it, but each has advantages and flaws. The presented article aimed to ensure higher energy efficiency indicators by using a counter-rotating pumping stage with trimming. During the research, the comprehensive approach was based on CFD modeling and the Moore–Penrose pseudoinverse approach for overestimated systems. According to the obtained data, pumps with a counter-rotating stage allowed the pressure head to be significantly increased compared with the standard design of the flow part. Notably, for pumping units CPS 180/1900 with a basic stage, the pressure head of 127 m was reached. However, when using a counter-rotating stage, the pressure head could be increased up to 270 m, which was 2.1 times higher. Therefore, to ensure unchanged characteristics when using centrifugal pumps with the counter-rotating stage, the weight and size indicators can be significantly reduced compared to the traditional design scheme. The proposed numerical and analytical approaches allow estimating the highest pressure and energy characteristics values.

16 October 2023 in Water
Verified
Journal Article
Open access
PDF file
VKVladyslav Kondus
Vladyslav Kondus
Ivan PavlenkoIvan Pavlenko
Ivan Pavlenko
OKOlexandr Kulikov
Olexandr Kulikov
Oleksandr LiaposhchenkoOleksandr Liaposhchenko
Oleksandr Liaposhchenko
Submersible pumps are the leading electricity consumers in centralized water supply systems. Considering the cost structure of the life cycle of pumping equipment, the main costs should include investment costs, electricity costs during operation, and costs of repairing pumping equipment. Considering the growing cost of electricity in the world, the cost of manufacturing pumping equipment is significantly increasing, which in turn causes an increase in its price. The key factor in increasing the competitiveness of such equipment on the market is its modernization with the achievement of a higher level of energy efficiency with a simultaneous reduction in cost due to a reduction in weight and dimension parameters. In the research, a significant increase in the head from 15 m to 65 m of the submersible pump stage was achieved by increasing the rotation frequency from 3000 rpm to 6000 rpm and designing the pump for this rotation frequency. As a result, the pump head, created by the flowing part with the basic stage (eight pieces), can be provided by the pump using only two designed stages. It creates the prerequisites for reducing the mass of the pump from 200 kg to 45 kg, or by 77.5%. Also, in designing the pump, energy efficiency was increased from 74.6% (for the existing pump) to 79.4% (by 5% for the developed pump). The research results made it possible to significantly contribute to reducing the cost of the life cycle of the submersible pump installation.

1 January 2022 in Journal of Engineering Sciences
Verified
Journal Article
Closed access
AMA. Mandryka
A. Mandryka
AMA. P. Majid
A. P. Majid
ОRОleksandr Ratushnyi
Оleksandr Ratushnyi
OKOlexandr Kulikov
Olexandr Kulikov
DSD. Sukhostavets
D. Sukhostavets
Author(s): Mandryka A.1*, Majid A. P.2, Ratushnyi O.1, Kulikov O.1, Sukhostavets D.1 Affiliation(s): 1 Department of Applied Hydroaeromechanics, Sumy State

1 January 2022 in Journal of Engineering Sciences
Verified
Journal Article
Closed access
OKOlexandr Kulikov
Olexandr Kulikov
ОRОleksandr Ratushnyi
Оleksandr Ratushnyi
OMOleksandr Moloshnyi
Oleksandr Moloshnyi
Oleksandr IvchenkoOleksandr Ivchenko
Oleksandr Ivchenko
Ivan PavlenkoIvan Pavlenko
Ivan Pavlenko
The article is devoted to studying the contra-rotating stages with different impellers and blade discs. Determining the reduction of volumetric losses by modeling the contra-rotating stages in the software package ANSYS CFX. The work aimed to create and study the flow and characteristics: semi-open, closed impellers, and blade discs. As a result of the work, the following contra-rotating stages were determined and compared: the semi-opened impeller with the semi-opened blade disc; the closed impeller with the closed blade disc; the semi-opened impeller with the closed blade disc; the closed impeller with the semi-opened blade disc. As a result of research, fluid flows in contra-rotating stages and their characteristics in the form of pressure and efficiency were obtained. According to the obtained data, the expediency of using contra-rotating stages as a working body of the pump is written.

21 November 2024 in Bulletin of Sumy National Agrarian University. The series: Mechanization and Automation of Production Processes
Verified
Journal Article
Open access
PDF file
OKOlexandr Kulikov
Olexandr Kulikov
ОRОleksandr Ratushnyi
Оleksandr Ratushnyi
ОІОлександр Володимирович Івченко
Олександр Володимирович Івченко
ВАВладислав Олександрович Андрусяк
Владислав Олександрович Андрусяк
ВГВладислав Олександрович Герасименко
Владислав Олександрович Герасименко
Контрроторні системи, що базуються на використанні двох роторів, які обертаються у протилежні сторони, викликають все більший інтерес у промислових галузях завдяки їх високій ефективності та здатності знижувати вібраційні навантаження. Це робить їх надзвичайно привабливими для багатьох секторів економіки, включаючи авіацію, суднобудування, автомобілебудування та енергетику, де надійність і енергоефективність відіграють ключову роль. У світі сучасних технологій, що стрімко розвиваються, контрроторний ефект пропонує унікальні можливості для оптимізації роботи обладнання, що відповідає зростаючим вимогам до якості та продуктивності. Така технологія також сприяє підвищенню загальної продуктивності, що важливо в умовах сучасних стандартів щодо енергозбереження. У насособудівній промисловості контрроторні технології відкривають нові горизонти для розробки компактних і водночас високопродуктивних насосних систем. Завдяки двом роторним елементам, що обертаються в різні сторони, вдається досягти більш ефективного переміщення рідини, а також знизити енергетичні втрати. Це дає можливість зменшити габаритні розміри обладнання без втрати його потужності та надійності. З огляду на це, у статті особлива увага приділяється порівнянню контрроторних насосних систем з традиційними центробіжними насосами типу ЦНС, які широко використовуються у різних сферах. У статті наводяться дані про напірні характеристики та енергоефективність, що демонструють суттєву перевагу контрроторних систем у конкретних умовах експлуатації. В експериментальній частині статті представлені результати тестування контрроторних ступенів з відвідними пристроями. Ці результати підтверджують, що така технологія не лише підвищує ефективність роботи насосів, але й дозволяє ефективно використовувати енергію, що є особливо важливим у сучасному контексті боротьби з енергетичними витратами. Таким чином, контрроторні системи являють собою перспективний напрямок у розвитку сучасного промислового обладнання, здатний забезпечити вищу продуктивність і енергоефективність при зменшенні вібрацій та навантажень. Продовження досліджень у цій сфері може привести до створення нових рішень, які сприятимуть подальшому вдосконаленню промислових процесів та обладнання, що використовуються в різних галузях.