The transformation of CO/CO2 hydrogenation into high-density sustainable aviation fuel (SAF) represents a promising pathway for carbon emission reduction in the aviation industry but also serves as a method for renewable energy assimilation. However, current hydrocarbon products synthesized through CO/CO2 often focus on various catalytic paths with high selectivity and high conversion rates rather than the synthesis of SAFs with complex components. This study undertakes a thermodynamic investigation into the direct or indirect synthesis of SAFs from CO/CO2 hydrogenation. By analyzing the synthesis of seven aviation fuels defined by the American Society for Testing and Materials (ASTM) D7566 standard, our study reveals a temperature-dependent reduction in the reaction driving force for all products. Specifically, for CO, ΔG transitions from approximately −88.6 J/(mol·K) at 50 °C to 26.7 J/(mol·K) at 500 °C, with the switch from negative to positive values occurring around 390 °C. Similarly, for CO2, ΔG values change from approximately −66.7 J/(mol·K) at 50 °C to 37.3 J/(mol·K) at 500 °C, with the transition point around 330 °C. The thermodynamic favorability for various hydrocarbon products synthesized is also examined, highlighting a transition at temperatures of around 250 °C, beyond which the thermodynamic drive for the synthesis of aromatic compounds increasingly surpasses that of cycloparaffin synthesis. Our findings also underscore that the products with a higher aromatic content yield a lower H2/CO2 ratio, thus reducing hydrogen consumption. The influence of cycloparaffin and aromatic proportions in the typical SAF products on the ΔG is also explored, revealing that an increase in cycloparaffin content in SAFs slightly elevates the ΔG, whereas an increase in aromatic content significantly reduces ΔG, thereby markedly enhancing the thermodynamic drive of the CO/CO2 hydrogenation reaction. These findings underscore the thermodynamic preference for synthesizing SAF with a higher proportion of aromatic compounds, shedding light on potential pathways for optimizing fuel synthesis to improve efficiency. Finally, the thermodynamic challenges and potential solutions involved in synthesizing SAFs via specific intermediate compounds are discussed, presenting opportunities for more strategic process schemes in industrial scenarios.
18 January 2023 in Chinese Journal of Chemical Engineering
Residential coal combustion is a major source of air pollution in developing countries, including China. Indeed, precisely measuring the real-time emission of major air pollutants is often challenging and can hardly be repeated at a lab-scale. In this study, for the first time, two clean coals initiated from raw bituminous coal were burned for real-time estimation of air pollution characteristics and their thermal efficiencies in different stoves. Moreover, thermodynamic equilibrium simulations were investigated for slagging parameters using Factsage 7.1 at reaction temperature 800~1600 °C. Results revealed that the firepower of clean coals (Briquetted coal and Semi-coke) was much higher (2.2 kW and 2.1 kW) than raw coal (1.8 kW) in a traditional stove. However, the thermal efficiencies were remarkably increased (13.3% and 13.5%) in an improved stove for briquetted coal and semi-coke, respectively. The emission of major air pollutants including carbon monoxide (CO), sulfur dioxide (SO2), particulate matter (PM), polycyclic aromatic hydrocarbons (PAHs), non-methane hydrocarbons (NMHCs) from both coal and semi-coke was significantly reduced. Thermodynamic equilibrium calculations indicate that briquetted coal is not susceptible to slagging under the reaction conditions in the household stove. The current study provides guidance for the selection of alternative and efficient clean coal fuels in rural areas for household purposes coupled with public health and safety.
The multiphase air-core pulsed alternator has multiple uses of directed energy systems, power adjustment, and so on. In this paper, a multiphase air-core pulsed alternator system is analyzed and simulated. The working process of the eight-phase air-core pulsed alternator is described in detail and its mathematical model is given. A Simulink simulation model is established, and the way of working of the entire system is simulated through it. Finally, because the firing angle of thyristors in the discharge controller is determined by detecting the rotor position, we give the structure and principle of the motor position detection device and analyze the waveform of discharge current under different trigger angles through simulation.