The directional transformation of carbon dioxide (CO2) with renewable hydrogen into specific carbon-heavy products (C6+) of high value presents a sustainable route for net-zero chemical manufacture. However, it is still challenging to simultaneously achieve high activity and selectivity due to the unbalanced CO2 hydrogenation and C–C coupling rates on complementary active sites in a bifunctional catalyst, thus causing unexpected secondary reaction. Here we report LaFeO3 perovskite-mediated directional tandem conversion of CO2 towards heavy aromatics with high CO2 conversion (> 60%), exceptional aromatics selectivity among hydrocarbons (> 85%), and no obvious deactivation for 1000 hours. This is enabled by disentangling the CO2 hydrogenation domain from the C-C coupling domain in the tandem system for Iron-based catalyst. Unlike other active Fe oxides showing wide hydrocarbon product distribution due to carbide formation, LaFeO3 by design is endowed with superior resistance to carburization, therefore inhibiting uncontrolled C–C coupling on oxide and isolating aromatics formation in the zeolite. In-situ spectroscopic evidence and theoretical calculations reveal an oxygenate-rich surface chemistry of LaFeO3, that easily escape from the oxide surface for further precise C–C coupling inside zeolites, thus steering CO2-HCOOH/H2CO-Aromatics reaction pathway to enable a high yield of aromatics.
2 August 2025 in Journal of the American Chemical Society
The micro-structures of catalyst materials basically affect their macro-architectures and catalytic performances. Atomically resolving the micro-structures of zeolite catalysts, which have been widely used in the methanol conversion, will bring us a deeper insight into their structure-property correlations. However, it is still challenging for the atomic imaging of silicoaluminophosphate zeolites by electron microscopy due to the limits of their electron beam sensitivity. Here, we achieve the real-space imaging of the atomic lattices in SAPO-34 and SAPO-18 zeolites, including the Al–O–P atoms and bonds, by the integrated differential phase contrast scanning transmission electron microscopy (iDPC-STEM). The spatial distribution of SAPO-34 and SAPO-18 domains in SAPO-34/18 intergrowths can be clearly resolved. By changing the Si contents and templates in feed, we obtain two SAPO-34/18 catalysts, hierarchical and sandwich catalysts, with highly-mixed and separated SAPO-34 and SAPO-18 lattices respectively. The reduced diffusion distances of inside products greatly improve the catalytic performances of two catalysts in methanol conversion. Based on the observed distributions of lattices and elements in these catalysts, we can have a preliminary understanding on the correlation between the synthesis conditions and structures of SAPO-34/18 intergrowth catalysts to further modify their performances based on unique architectures.
5 November 2019 in Journal of Chemical & Engineering Data
The transformation of CO/CO2 hydrogenation into high-density sustainable aviation fuel (SAF) represents a promising pathway for carbon emission reduction in the aviation industry but also serves as a method for renewable energy assimilation. However, current hydrocarbon products synthesized through CO/CO2 often focus on various catalytic paths with high selectivity and high conversion rates rather than the synthesis of SAFs with complex components. This study undertakes a thermodynamic investigation into the direct or indirect synthesis of SAFs from CO/CO2 hydrogenation. By analyzing the synthesis of seven aviation fuels defined by the American Society for Testing and Materials (ASTM) D7566 standard, our study reveals a temperature-dependent reduction in the reaction driving force for all products. Specifically, for CO, ΔG transitions from approximately −88.6 J/(mol·K) at 50 °C to 26.7 J/(mol·K) at 500 °C, with the switch from negative to positive values occurring around 390 °C. Similarly, for CO2, ΔG values change from approximately −66.7 J/(mol·K) at 50 °C to 37.3 J/(mol·K) at 500 °C, with the transition point around 330 °C. The thermodynamic favorability for various hydrocarbon products synthesized is also examined, highlighting a transition at temperatures of around 250 °C, beyond which the thermodynamic drive for the synthesis of aromatic compounds increasingly surpasses that of cycloparaffin synthesis. Our findings also underscore that the products with a higher aromatic content yield a lower H2/CO2 ratio, thus reducing hydrogen consumption. The influence of cycloparaffin and aromatic proportions in the typical SAF products on the ΔG is also explored, revealing that an increase in cycloparaffin content in SAFs slightly elevates the ΔG, whereas an increase in aromatic content significantly reduces ΔG, thereby markedly enhancing the thermodynamic drive of the CO/CO2 hydrogenation reaction. These findings underscore the thermodynamic preference for synthesizing SAF with a higher proportion of aromatic compounds, shedding light on potential pathways for optimizing fuel synthesis to improve efficiency. Finally, the thermodynamic challenges and potential solutions involved in synthesizing SAFs via specific intermediate compounds are discussed, presenting opportunities for more strategic process schemes in industrial scenarios.