Paper artifacts have unique cultural and historical values. However, over time, many paper artifacts appear with disease characteristics such as embrittlement and photoaging, losing the most fundamental function of the literature archive. The reinforcement handling of degraded paper artifacts is, therefore, a necessary measure to extend their service life, the key to which lies in the reinforcement and prevention of photoaging. This paper intended to use graphene oxide (GO) as a UV protective agent, carboxymethyl cellulose (CMC) as a reinforcement, and polyethyleneimine (PEI) as a modifier. In this work, the amino-modified graphene oxide carboxymethyl cellulose composite (CMC-aGO) was prepared by chemical modification, which was used as bifunctional paper protection material with anti-ultraviolet and reinforcement. It showed excellent performance in both tensile strength testing and UV resistance testing. The CMC-aGO raw material is low cost, colorless, transparent, simple to synthesize, convenient to operate, and is an excellent conservation material with dual functions of UV aging protection and paper reinforcement.

The Taidong Tomb in the imperial tombs of the Qing dynasties has great aesthetic value and a rich history. In this study, we conducted the first investigation ever performed on the raw materials used in the paintings in the Taidong Tomb. Energy dispersive X-ray spectroscopy (EDX), polarized light microscopy (PLM), X-ray diffraction (XRD), micro-Raman spectroscopy (m-RS), Fourier-transform infrared spectroscopy (FTIR) and pyrolysis–gas chromatography–mass spectrometry (Py-GC/MS) were used to comprehensively analyze the painting of Long’en Hall, Xipei Hall and the ceiling of Minglou. In the conclusion of the study, the paintings were found to contain natural mineral and synthetic pigments, including atacamite (Cu₂Cl(OH)₃), azurite (2CuCO₃·Cu(OH)₂), vermilion (HgS), carbon black (C), anglesite (PbSO₄), white lead (2PbCO₃·Pb(OH)₂), synthetic emerald green (Cu(CH₃COO)₂·3Cu(AsO₂)₂) and ultramarine ((Na,Ca)₈(AlSiO₄)₆(SO₄,S,Cl)₂). This allows us to conclude that some of the architectural paintings were repainted in the mid-to-late 19th century. The mortar layer may consist of brick ash (albite, gismondine), lime water, tung oil and flour. The fiber layer material may be ramie. Researching the raw materials of the paintings in the Taidong Tomb is of great value because it provides scientific data for the future preservation of the paintings in the tomb.

In recent years, based on the urgent need in the field of cultural heritage conservation, the research and development of coatings have attracted much attention. FEVE (trifluorovinyl chloride and vinyl ether copolymer) is one of the reinforcing materials in the protective coatings of color paint. However, it has problems such as compactness, low tensile strength, and poor resistance to aging. Therefore, modified graphene was introduced and combined with FEVE coatings (FEVE/m-GO) to optimize their adhesion, compactness, resistance to corrosion, and performance at shielding the paintings from ultraviolet light. The structural features of the hybrid films were characterized by UV–Vis spectroscopy, transmission electron microscopy, infrared spectroscopy, etc. In addition, the water absorption, mechanical properties, color difference test, and aging resistance of the FEVE/m-GO and simulated samples were investigated. The results showed that the hybrid film with 0.04% m-GO incorporation as an effective consolidant exhibited outstanding comprehensive performance. This composite material was used in the protection and consolidation of the Sanyou Xuan ancient architectural color painting in the Palace Museum, which opened up a new way of thinking about the long-term conservation of color paintings.

Over recent decades, various heritage institutions have utilized a multitude of materials to reinforce the painted layers of ancient Chinese wooden architecture. In this study, we conducted a comprehensive evaluation of the properties and durability of four widely used reinforcement agents, i.e., AC33, B72, FKM, and FEVE, using a series of techniques, including contact angle tests, water vapor permeability measurements, color difference evaluations, tensile strength tests, UV–vis spectrometry, and scanning electron microscopy (SEM). The results demonstrate that the transmittance rates of the films made from these four reinforcement agents are approximately 100% in the visible light range. Among them, the B72 film exhibits the highest hydrophobicity. The AC33 film has better permeability, fair tensile strength, and is more hydrophilic. FKM film is more hydrophobic but has lower permeability and tensile strength. Overall, the FEVE film presents the best comprehensive properties, including better hydrophobicity, higher permeability, and tensile strength. This research provides data evidence to guide heritage conservators and curators in decision-making when selecting appropriate reinforcement materials in practice.

Situated in the village of Lama Temple on the eastern bank of the Wulie River in Chengde, Puren Temple stands as one of the few remaining royal temples of great importance from the Kangxi era (1662–1722 AD). This ancient edifice has greatly contributed to the advancement of our comprehension regarding the art of royal temple painting. The present study undertakes a comprehensive analysis and identification of nine samples obtained from the beams and ceiling paintings within the main hall of Puren Temple. Furthermore, a systematic examination of their mineral pigments and adhesives is conducted. The findings from polarized light microscopy (PLM), energy-type X-ray fluorescence spectrometer (ED-XRF), micro-Raman spectroscopy (m-RS), and X-ray diffractometer (XRD) analyses reveal that the pigments present in the main hall beams of Puren Temple are cinnabar, lead white, lapis lazuli, and lime green, while the pigments in the ceiling paintings consist of cinnabar, staghorn, lead white, lapis lazuli, and lime green. The use of animal glue as a binder for these pigments on both the main hall beams and ceiling paintings is confirmed via pyrolysis-gas chromatography–mass spectrometry (Py-Gc/Ms) results. These findings hold significant implications for the future restoration of Puren Temple, as they provide valuable guidance for the selection of appropriate restoration materials.

Some painted pottery figurines were excavated from the tomb of Qibi Ming of the Tang Dynasty. A series of analytical techniques were employed to understand the craftsmanship of these painted pottery figurines. The pigment, cross-section, adhesive, and firing temperature were analyzed using microscopy (OM), energy X-ray fluorescence spectrometry (EDX), micro-Raman spectroscopy, pyrolysis–gas chromatography–mass spectrometry (Py-GC/MS), and a dilatometer (DIL). The results demonstrated that the surface of the pigment layers had degraded to different degrees. The pigment particles were litharge, gypsum, malachite, cinnabar, hematite, minium, white lead, and carbon black. The cross-sectional images show that the painted layer of figurines 10-0966 and 10-0678 included a pigment layer and a preparation layer. The preparation layer of both pigments was lead white. Animal glue was used as an adhesive. The firing temperature of the pottery figurines was likely 1080 °C. This study can provide more accurate information with regard to the composition of the raw materials utilized in the making of these artifacts and support the selection of appropriate substances for the purposes of conservation and restoration of the painted pottery figurines.