The accretion of ice and frost on various infrastructure is ubiquitous in cold and humid environments, causing economic losses amounting to billions of dollars every year worldwide. The past couple of decades have seen unprecedented advances in the fields of surface chemistry and micro/nanofabrication, enabling the development of hydrophobic and superhydrophobic surfaces that promote facile deicing and/or passive anti-icing. However, in the light of new discoveries regarding the incipient stages of frost formation, it is becoming increasingly clear that the problems of icing and frosting are not one and the same. Thus, passive anti-icing strategies do not exhibit anti-frosting behavior, and the development of passive anti-frosting surfaces remains an unsolved problem. In this review, we provide a critical discussion of condensation frosting and show how the emerging new phenomena of frost halos, interdroplet ice bridges, and dry zones that comprise the incipient stages of frosting set it apart from the conventional problem of icing. Subsequently, we discuss possible strategies to break the sequential chain of events leading to pervasive frost growth.
Hotspot cooling is critical to the performance and reliability of electronic devices, but existing techniques are not very effective in managing mobile hotspots. We report a hotspot cooling technique based on a jumping-drop vapor chamber consisting of parallel plates of a superhydrophilic evaporator and a superhydrophobic condenser, where the working fluid is returned via the spontaneous out-of-plane jumping of condensate drops. While retaining the passive nature of traditional vapor-chamber heat spreaders (flat-plate heat pipes), the jumping-drop technique offers a mechanism to address mobile hotspots with a pathway toward effective thermal transport in the out-of-plane direction.
17 September 2018 in ACS Applied Materials & Interfaces
Freshwater scarcity has become a critical global challenge affecting some of the most vulnerable populations. In response, significant effort has focused on ways to increase access to this precious resource. Within the context of geographical, cultural, political, and technological factors governing freshwater availability, atmospheric water harvesting (AWH) has demonstrated tremendous promise to help address these shortages. Specifically, mesh‐based fog harvesters have received considerable attention for their passive qualities compared with their energy‐dependent technological siblings (sorbents, condensation, etc.), yet their specific water yield (SY) has developed only modestly in recent decades. While the plant and animal kingdom provide diverse examples of passive fog collection, and science has developed a remarkable understanding of these processes, much of this knowledge has yet to be translated practically at scale. This is partially due to challenges in mass‐producing complex (often micro‐scale) structures observed in nature. Fortunately, manufacturing technology is catching up with scientific understanding, especially at the scale of mesh design. To this end, the review begins by surveying bioinspired research in fog harvesting. Afterward, this study identifies milestones in developing bioinspired fog harvesting meshes, concluding in a discussion of future mesh research opportunities connecting bioinspiration and emerging advanced manufacturing techniques.