3 April 2017 in Applied Physics Letters
Hotspot cooling is critical to the performance and reliability of electronic devices, but existing techniques are not very effective in managing mobile hotspots. We report a hotspot cooling technique based on a jumping-drop vapor chamber consisting of parallel plates of a superhydrophilic evaporator and a superhydrophobic condenser, where the working fluid is returned via the spontaneous out-of-plane jumping of condensate drops. While retaining the passive nature of traditional vapor-chamber heat spreaders (flat-plate heat pipes), the jumping-drop technique offers a mechanism to address mobile hotspots with a pathway toward effective thermal transport in the out-of-plane direction.
18 March 2019 in Applied Physics Letters
A superhydrophobic surface is non-sticking to aqueous droplets due to minimized solid-liquid contact, but the small contact area also poses challenges to droplet maneuvering. This letter reports a technique using electric field gradients to actuate aqueous droplets on superhydrophobic surfaces. A pin-ring electrode pair underneath the insulating superhydrophobic surface is used to generate electric field gradient above the surface, with the field focused around the pin. The non-uniform field operates on the electrostatically induced charges on the droplet, producing an actuation force attracting the droplet toward the pin. The actuation force is proportional to the square of the imposed field as shown in both experiments and simulations. This non-contact actuation technique is effective in electrostatically trapping and translating superhydrophobic droplets, despite the small solid-liquid contact. The pin-ring configuration can be readily extended to a pin array between two parallel lines, which essentially form a stretched ring closing at infinity. The pin array is used to demonstrate individual actuation of two droplets leading to their eventual coalescence.
31 May 2017 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Solid heat spreaders, particularly those made of copper or graphite, are often benchmark solutions for hotspot thermal management. In this paper, we present exact and approximate analytical solutions of steady-state hotspot cooling with a planar heat spreader, which is subjected to adiabatic conditions except for a hotspot centered at the top surface and a constant temperature at the bottom surface. The approximate solution bridges exact solutions at two limits of hotspot size: infinitesimal hotspot at the center and uniform heat flux across the spreader. The approximate solution accounts for variable hotspot size and anisotropic thermal conductivity in a compact form, which is useful for estimating thermal parameters such as conduction shape factor and effective thermal conductivity.