Ana Belén Espinosa

Mrs. Ana Belén Espinosa

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AEAna Belén Espinosa
Ana Belén Espinosa
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
MSMarta Skaf
Marta Skaf
Flora FaleschiniFlora Faleschini
Flora Faleschini
VOVanesa Ortega-López
Vanesa Ortega-López
Ultrasonic pulse velocity (UPV) is a non-destructive measurement technique with which the quality of any concrete element can be evaluated. It provides information on concrete health and for assessing the need for repair in a straightforward manner. In this paper, the relationship is studied between UPV readings and the mechanical behavior of self-compacting concrete (SCC) containing coarse, fine, and/or powdery RA. To do so, correlations and simple- and multiple-regression relationships between compressive strength, modulus of elasticity, splitting tensile strength, flexural strength, and UPV readings of nine SCC mixes were assessed. The correlations showed that the relationship of UPV with any mechanical property was fundamentally monotonic. The inverse square-root model was therefore the best-fitting simple-regression model for all the mechanical properties, although for bending-tensile-behavior-related properties (splitting tensile strength and flexural strength) the estimation accuracy was much lower than for compressive-behavior-related properties (compressive strength and modulus of elasticity). Linear-combination multiple-regression models showed that the properties related to bending-tensile behavior had a minimal influence on the UPV value, and that their introduction resulted in a decreased estimation accuracy. Thus, the multiple-regression models with the best fits were those that linked the compressive-behavior-related properties to the UPV readings. This therefore enables the estimation of the modulus of elasticity when the UPV and compressive strength are known with a deviation of less than ±20% in 87% of the SCC mixes reported in other studies available in the literature.

9 December 2020 in Mathematics
Verified
Journal Article
Open access
PDF file
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
MSMarta Skaf
Marta Skaf
AEAna Belén Espinosa
Ana Belén Espinosa
ASAmaia Santamaría
Amaia Santamaría
VOVanesa Ortega-López
Vanesa Ortega-López
The compressive strength of recycled concrete is acknowledged to be largely conditioned by the incorporation ratio of Recycled Concrete Aggregate (RCA), although that ratio needs to be carefully assessed to optimize the design of structural applications. In this study, Self-Compacting Concrete (SCC) mixes containing 100% coarse RCA and variable amounts, between 0% and 100%, of fine RCA were manufactured and their compressive strengths were tested in the laboratory for a statistical analysis of their strength variations, which exhibited robustness and normality according to the common statistical procedures. The results of the confidence intervals, the one-factor ANalysis Of VAriance (ANOVA), and the Kruskal–Wallis test showed that an increase in fine RCA content did not necessarily result in a significant decrease in strength, although the addition of fine RCA delayed the development of the final strength. The statistical models presented in this research can be used to define the optimum incorporation ratio that would produce the highest compressive strength. Furthermore, the multiple regression models offered accurate estimations of compressive strength, considering the interaction between the incorporation ratio of fine RCA and the curing age of concrete that the two-factor ANOVA revealed. Lastly, the probability distribution predictions, obtained through a log-likelihood analysis, fitted the results better than the predictions based on current standards, which clearly underestimated the compressive strength of SCC manufactured with fine RCA and require adjustment to take full advantage of these recycled materials. This analysis could be carried out on any type of waste and concrete, which would allow one to evaluate the same aspects as in this research and ensure that the use of recycled concrete maximizes both sustainability and strength.

30 August 2023 in Environmental Science and Pollution Research
Verified
Journal Article
Open access
PDF file
AEAna Belén Espinosa
Ana Belén Espinosa
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
MSMarta Skaf
Marta Skaf
RSRoberto Serrano-López
Roberto Serrano-López
VOVanesa Ortega-López
Vanesa Ortega-López
In this paper, the performance of ladle furnace slag (LFS), a by-product of secondary steel refining, is evaluated as a binder to stabilize clayey soils of low bearing capacity. The aim is to define whether additions of this by-product to clayey soil can stabilize the soil in accordance with the technical specifications of Spanish standards. To do so, three different soils stabilized with 5% LFS were compared with the same soils stabilized with 2% lime and with no stabilization, in order to investigate their different behaviors. The chemical and mineralogical characterizations of all the soil mixes were conducted using X-ray fluorescence, X-ray diffraction, and scanning electron microscopy. The Atterberg limit test was used to study the plastic behavior of the soils, and the results of compaction, bearing capacity, unconfined compressive strength, and direct shear strength (cohesion and friction angle) tests defined their strength characteristics. The analysis was completed with the pH monitoring of the mixes along the curing time in order to relate the pH changes with the strength evolution. The addition of LFS to the soils has resulted in an increase in the liquid limit and plastic limit, causing therefore a slight decrease in the plasticity index. All the soils showed increases between 30% and 70% in their California Bearing Ratios immediately after mixing with 5% LFS, and after 90 days of curing, improvements of 30–188% in their unconfined compressive strength were noted in comparison with untreated soil, which were higher than the lime-stabilized soils. The cohesion of soils stabilized with LFS at 28 days of curing obtained improvements ranging from 40 to 300% depending on the type of soil. However, the friction angle showed a slight increase of 10% in two of the soils and zero in another. The high initial pH in LFS-stabilized soils was maintained during the curing time, which favored the development of pozzolanic reactions that improve the soil strength. These results confirmed that the substitution of lime with LFS is a feasible option for soil stabilization.

13 December 2023 in Buildings
Verified
Journal Article
Open access
PDF file
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
RSRoberto Serrano-López
Roberto Serrano-López
AEAna Belén Espinosa
Ana Belén Espinosa
VOVanesa Ortega-López
Vanesa Ortega-López
MSMarta Skaf
Marta Skaf
The addition of Ladle Furnace Slag (LFS) to concrete modifies its compressive strength and modulus of elasticity and consequently impacts their relationship. This research evaluated both properties at 28, 90, and 180 days in concrete mixes produced with 5%, 10%, and 20% of two LFS types, both stabilized and non-stabilized. The relationship between them was then analyzed through these experimental results by adopting a statistical approach. A three-way analysis of variance revealed that both properties were affected by LFS differently. Thus, the effect of each LFS content on both features varied depending on its composition and pre-treatment. Furthermore, the effect of the LFS content on the compressive strength was also influenced by the age of the concrete. These facets implied that when analyzing the relationship between both mechanical properties, the monotonic correlations were stronger than the linear ones, reaching values between 0.90 and 1.00. Therefore, the double reciprocal regression models were the most precise ones for expressing the modulus of elasticity as a function of compressive strength. The model accuracy was further enhanced when discriminating based on the LFS type and introducing concrete age as a predictive variable. With all these considerations, the average deviations between the estimated and experimental values of 1–3% and the maximum deviations of 4–7% were reached, as well as R2 coefficients of up to 97%. These aspects are central to the further development of LFS concrete models.

23 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
AEAna Belén Espinosa
Ana Belén Espinosa
RSRoberto Serrano-López
Roberto Serrano-López
MSMarta Skaf
Marta Skaf
Juan Manuel Manso VillalaínJuan Manuel Manso Villalaín
Juan Manuel Manso Villalaín
The glass fiber-reinforced polymer (GFRP) materials of wind turbine blades can be recovered and recycled by crushing, thereby solving one of the most perplexing problems facing the wind energy sector. This process yields selectively crushed wind turbine blade (SCWTB), a novel waste that is almost exclusively composed of GFRP composite fibers that can be revalued in terms of their use as a raw material in concrete production. In this research, the fresh and mechanical performance of concrete made with 1.5%, 3.0%, 4.5%, and 6.0% SCWTB is studied. Once incorporated into concrete mixes, SCWTB waste slightly reduced slumps due to the large specific surface area of the fibers, and the stitching effect of the fibers on mechanical behavior was generally adequate, as scanning electron microscopy demonstrated good fiber adhesion within the cementitious matrix. Thus, despite the increase in the content of water and plasticizers when adding this waste to preserve workability, the compressive strength only decreased in the long term with the addition of 6.0% SCWTB, a value of 45 MPa always being reached at 28 days; Poisson’s coefficient remained constant from 3.0% SCWTB; splitting tensile strength was maintained at around 4.7 MPa up to additions of 3.0% SCWTB; and the flexural strength of mixes containing 6.0% and 1.5% SCWTB was statistically equal, with a value near 6.1 MPa. Furthermore, all mechanical properties of the concrete except for flexural strength were improved with additions of SCWTB compared to raw crushed wind turbine blade, which apart from GFRP composite fibers contains approximately spherical polymer and balsa wood particles. Flexural strength was conditioned by the proportion of fibers, their dimensions, and their strength, which were almost identical for both waste types. SCWTB would be preferable for applications in which compression stresses predominate.

24 August 2022 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
AEAna Belén Espinosa
Ana Belén Espinosa
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
VLVíctor López-Ausín
Víctor López-Ausín
RSRoberto Serrano-López
Roberto Serrano-López
FFFrancisco Fiol
Francisco Fiol
Steelmaking industry generates a large volume of by-products that not always can be reintroduced into production processes, such as the steelmaking process itself or the production of cement. This is the case of ladle furnace slag (LFS), whose potential use is limited and usually ends up in landfill. This work investigates the feasibility of using LFS as binder for clayey soils stabilization in substitution of lime. The main parameters evaluated are plasticity index, California Bearing Ratio (CBR) and Unconfined Compressive Strength (UCS). The results show that the strength behavior of the mixtures is remarkable, obtaining increases in the CBR index between 8-14 times above unmodified clays. The mechanical performance base on UCS results show improvements of 85 % relative to natural soils three days after mixing. Moreover, if the curing time is up to 90 days, the UCS doubles or triples its value. Depending on the chemical composition of the soils, the performances of the mixtures are different, but in all cases the results are positive and encourage further research for the incorporation of ladle furnace slag as stabilizing agent.