The fragility of the natural solid electrolyte interphase (SEI) and deformability of the naked Li anode cannot meet the requirements of high coulombic efficiency (CE) and long-period cycling for Li metal batteries (LMBs). Accordingly, conductive porous anode hosts with surface decoration/defect modulation appear to be an effective solution to restrain the growth of Li dendrites. Herein, we propose an unusual oxygen-defect-rich nanoporous MgOx coating bonded with carboxyl-rich carbon wires (MgOx–C), which act as a 3D monolithic host and artificial SEI film simultaneously, to achieve dendrite-free LMBs. The enrichment of the lithiophilic (carboxyl groups) and anionphilic (oxygen defects) sites could homogenize the Li deposition process, accommodate the anode volume variation, and mitigate the depletion of the space charge. The highly defective MgOx enabled fast charge transfer, thus result in a high-rate Li plating performance. The initial nucleation and following plating behaviors of Li were significantly optimized by the conversion and alloying reactions between the Li and MgOx domains. The resultant Li@MgOx–C electrode enabled a stable Li plating/stripping process with a low overpotential and high CE, even under the high plating capacity of 10 mA h cm−2 and high current density of 15 mA cm−2.
The three-primary-color chip array is the most straightforward to realize full-color micro-LED displays. However, the luminous intensity distribution shows high inconsistency between the AlInP-based red micro-LED and GaN-based blue / green micro-LEDs, resulting in the issue of angular color shift with different viewing angles. This Letter analyzes the angular dependence of color difference of conventional three-primary-color micro-LEDs, and proves that the inclined sidewall with homogeneous Ag coating has a limited angular regulation effect for micro-LEDs. Based on this, a patterned conical microstructure array is designed on the micro-LED’s bottom layer to effectively eliminate the color shift. This design cannot only regulate the emission of full-color micro-LEDs to perfectly meet Lambert’s cosine law without any external beam shaping elements, but also improve the light extraction efficiency of top emission by 16%, 161%, and 228% for red, green, and blue micro-LEDs, respectively. The color shift Δu′v′ of the full-color micro-LED display is also kept below 0.02 with the viewing angle ranging from 10° to 90°.
A two-dimensional Ruddlesden–Popper perovskite BA2PbI4 was systematically studied, including its crystal structure, microstructure, electronic structure, phonon dispersion, vibrational characteristics, etc.