Pulse Spray Drying (PSD) has potential as a sustainable means of skimmed milk powder (SMP) production. In this study, powders were obtained from PSD using different drying outlet temperatures (70, 80, 90 and 100 °C), and their characteristics were compared to those of traditional Spray Drying (SD). Native whey proteins were well preserved and Solubility Indexes were over 98% in all cases, despite powders obtained by PSD displaying lower solubility than the SD ones. No visual difference was observable in the powders (ΔE < 2); however, PSD powders were found to be yellower with a higher Browning Index. The drying technology did not have a significant effect on powder moisture content and bulk density. Particle size distribution and scanning electron microscopy images confirmed the presence of fine particles (<10 μm) in all samples that might have provided poor flowability and wetting behavior (overall Carr Index and Hausner ratio were 33.86 ± 3.25% and 1.52 ± 0.07, respectively). Higher amounts of agglomerated particles were found at low temperatures in the products processed with both technologies, but PSD samples showed a narrower particle size distribution and hollow particles with more wrinkles on the surface (probably due to the fast evaporation rate in PSD). Overall, PSD provided SMP with comparable physicochemical characteristics to SD and, once optimized at the industrial level, could offer significant advantages in terms of thermal efficiency without significant modification of the final product quality.
Whey exhibits interesting nutritional properties, but its high β-Lactoglobulin (β-Lg) content could be a concern in infant food applications. In this study, high-pressure processing (HPP) was assessed as a β-Lg removal strategy to generate an enriched α-Lactalbumin (α-La) fraction from bovine native whey concentrate. Different HPP treatment parameters were considered: initial pH (physiological and acidified), sample temperature (7–35 °C), pressure (0–600 MPa) and processing time (0–490 s). The conditions providing the best α-La yield and α-La purification degree balance (46.16% and 80.21%, respectively) were 4 min (600 MPa, 23 °C), despite the significant decrease of the surface hydrophobicity and the total thiol content indexes in the α-La-enriched fraction. Under our working conditions, the general effects of HPP on α-La and β-Lg agreed with results reported in other studies of cow milk or whey. Notwithstanding, our results also indicated that the use of native whey concentrate could improve the β-Lg precipitation degree and the α-La purification degree, in comparison to raw milk or whey. Future studies should include further characterization of the α-La-enriched fraction and the implementation of membrane concentration and HPP treatment to valorize cheese whey.
Thanks to food technology, the production of cold tomato soups such as salmorejo, a traditional Spanish dish, has become industrialised. Thermal treatments play an important role in ready-to-eat meals, prolonging their shelf-life. Radiofrequency (RF) heating is less energy-intensive than conventional heat exchangers and has been successfully used to pasteurise food; novel applications, however, provide results at laboratory or pilot scale, so conclusions might not be translatable to industry. In this study, a prospective Life-Cycle Assessment of salmorejo pasteurised using RF was performed to highlight the relevance of upscaling and to compare its environmental impacts with those of conventional pasteurisation. “Gate-to-gate” results show that the pilot has greater environmental impacts due to its greater energy consumption, as thermal energy is not recovered. The packing and landfill of organic waste exhibit the highest impacts at industrial scale. RF technology does not imply significant environmental improvements versus conventional pasteurisation. Potential changes in the energy background of future scenarios have relevant consequences in the environmental impacts. “Farm-to-factory-gate” analysis highlights ingredients and tomato valorisation as the most impacting stages. The prospective LCA of scaled up scenarios constitutes a tool for environmental screening in food ecodesign, contributing to Sustainable Development Goal 12.