The durability and long-term applicability of catalysts are critical parameters for the commercialization and adoption of fuel cells. Even though a few studies have been conducted on hollow carbon spheres (HCSs) as supports for Pt in oxygen reduction reactions (ORR) catalysis, in-depth durability studies have not been conducted thus far. In this study, Pt/HCSs and Pt/nitrogen-doped HCSs (Pt/NHCSs) were prepared using a reflux deposition technique. Small Pt particles were formed with deposition on the outside of the shell and inside the pores of the shell. The new catalysts demonstrated high activity (>380 μA cm−2 and 240 mA g−1) surpassing the commercial Pt/C by more than 10%. The catalysts demonstrated excellent durability compared to a commercial Pt/C in load cycling, experiencing less than 50% changes in the mass-specific activity (MA) and surface area-specific activity (SA). In stop-start durability cycling, the new materials demonstrated high stability with more than 50% retention of electrochemical active surface areas (ECSAs). The results can be rationalised by the high BET surface areas coupled with an array of meso and micropores that led to Pt confinement. Further, pair distribution function (PDF) analysis of the catalysts confirmed that the nitrogen and oxygen functional groups, as well as the shell curvature/roughness provided defects and nucleation sites for the deposition of the small Pt nanoparticles. The balance between graphitic and diamond-like carbon was critical for the electronic conductivity and to provide strong Pt-support anchoring.
29 March 2021 in Journal of Applied Electrochemistry
Cobalt oxide nanoparticles (6 nm) supported both inside and outside of hollow carbon spheres (HCSs) were synthesized by using two different polymer templates. The oxidation of benzyl alcohol was used as a model reaction to evaluate the catalysts. PXRD studies indicated that the Co oxidation state varied for the different catalysts due to reduction of the Co by the carbon, and a metal oxidation step prior to the benzyl alcohol oxidation enhanced the catalytic activity. The metal loading influenced the catalytic efficiency, and the activity decreased with increasing metal loading, possibly due to pore filling effects. The catalysts showed similar activity and selectivity (to benzaldehyde) whether placed inside or outside the HCS (63 % selectivity at 50 % conversion). No poisoning was observed due to product build up in the HCS.
Formic acid has emerged as a highly attractive liquid hydrogen carrier owing to its high volumetric hydrogen density, low toxicity, and compatibility with on‐demand hydrogen generation under mild conditions. Among heterogeneous catalysts, palladium‐based systems remain the best performing for selective formic acid dehydrogenation due to their strong preference for the dehydrogenation pathway and comparatively low susceptibility to CO poisoning. This review examines the fundamentals, mechanisms, and recent advances in the catalytic decomposition of formic acid, with a particular focus on supported Pd catalysts and Pd‐based bimetallic and alloy systems. The structure‐activity relationships that influence hydrogen selectivity are discussed, including particle size effects, surface coordination, alloying‐induced electronic effects, the effects of neighbouring atoms, and the role of catalyst supports. Carbon‐based, silica‐based, and oxide supports are evaluated in terms of dispersion control, metal‐support interactions, and confinement effects, while Pd‐Au and Pd‐Ag nanoalloys are highlighted as model systems for suppressing CO formation through synergistic electronic and geometric modifications. By combining interpretations from kinetic studies, spectroscopy, and density functional theory, this review provides a combined perspective for understanding formic acid dehydrogenation across various catalyst systems.
The Cover Feature shows the cobalt oxide nanoparticles supported both inside and outside hollow carbon spheres (HCSs), which serve as a catalyst for benzyl alcohol oxidation. A metal oxidation step prior to the reaction enhanced the catalytic activity of benzyl alcohol which was used as a model reaction for the catalysts. Both catalysts showed similar activity and selectivity (to benzaldehyde) whether placed inside or outside the HCSs (70% selectivity at 50% conversion). No poisoning was observed due to product build up in the HCSs. More information can be found in the Full Paper by Pumza Mente et al.