The durability and long-term applicability of catalysts are critical parameters for the commercialization and adoption of fuel cells. Even though a few studies have been conducted on hollow carbon spheres (HCSs) as supports for Pt in oxygen reduction reactions (ORR) catalysis, in-depth durability studies have not been conducted thus far. In this study, Pt/HCSs and Pt/nitrogen-doped HCSs (Pt/NHCSs) were prepared using a reflux deposition technique. Small Pt particles were formed with deposition on the outside of the shell and inside the pores of the shell. The new catalysts demonstrated high activity (>380 μA cm−2 and 240 mA g−1) surpassing the commercial Pt/C by more than 10%. The catalysts demonstrated excellent durability compared to a commercial Pt/C in load cycling, experiencing less than 50% changes in the mass-specific activity (MA) and surface area-specific activity (SA). In stop-start durability cycling, the new materials demonstrated high stability with more than 50% retention of electrochemical active surface areas (ECSAs). The results can be rationalised by the high BET surface areas coupled with an array of meso and micropores that led to Pt confinement. Further, pair distribution function (PDF) analysis of the catalysts confirmed that the nitrogen and oxygen functional groups, as well as the shell curvature/roughness provided defects and nucleation sites for the deposition of the small Pt nanoparticles. The balance between graphitic and diamond-like carbon was critical for the electronic conductivity and to provide strong Pt-support anchoring.
29 March 2021 in Journal of Applied Electrochemistry
Cobalt oxide nanoparticles (6 nm) supported both inside and outside of hollow carbon spheres (HCSs) were synthesized by using two different polymer templates. The oxidation of benzyl alcohol was used as a model reaction to evaluate the catalysts. PXRD studies indicated that the Co oxidation state varied for the different catalysts due to reduction of the Co by the carbon, and a metal oxidation step prior to the benzyl alcohol oxidation enhanced the catalytic activity. The metal loading influenced the catalytic efficiency, and the activity decreased with increasing metal loading, possibly due to pore filling effects. The catalysts showed similar activity and selectivity (to benzaldehyde) whether placed inside or outside the HCS (63 % selectivity at 50 % conversion). No poisoning was observed due to product build up in the HCS.
The hydrogen evolution reaction (HER) in alkaline electrolytes using transition metal dichalcogenides is a research area that is not tapped into. Alkaline HER ( ) is harder to achieve relative to acidic HER ( ), this is attributed to the additional water dissociation step that occurs in basic HER to generate H+ ions. In fact, for most catalysts, their HER activity decreases tremendously when the electrolyte is changed from acidic to basic conditions. Platinum dichalcogenides, PtX2 (X=S, Se, Te), are an interesting member of transition metal dichalcogenides (TMDs) as these show an immense hybridization of the Pt d orbitals and chalcogen p orbitals because of closely correlated orbital energies. The trend in electronic properties of these materials changes drastically as the chalcogen is changed, with PtS2 reported to exhibit semi‐conductor properties, PtSe2 is semi‐metallic or semi‐conductive, depending on the number of layers, while PtTe2 is metallic. The effect of varying the chalcogen atom on the HER activity of Pt dichalcogenides will be studied. Pt dichalcogenides have previously been prepared by direct high‐temperature chalcogen deposition of Pt substrate and evaluated as electrocatalysts for HER in H2SO4. The previously employed synthesis procedures for PtX2 limit these compounds′ mass production and post‐synthesis treatment. In this study, we demonstrated, for the first time the preparation of PtSe2 and PtTe2 by colloidal synthesis. Colloidal synthesis offers the possibility of large‐scale synthesis of materials and affords the employment of the colloids at various concentrations in ink formulation. The electrochemical HER results acquired in 1 M KOH indicate that PtTe2 has a superior HER catalytic activity to PtSe2. A potential of 108 mV for PtTe2 and 161 mV for PtSe2 is required to produce a current density of −10 mA cm−2 from these catalysts. PtTe2 has a low Tafel slope of 79 mVdec−1, indicating faster HER kinetics on PtTe2. Nonetheless, the stability of these catalysts in an alkaline medium needs to be improved to render them excellent HER electrocatalysts.