Biomass as a renewable energy source includes energy crops that are not used for food but solely for biomass production with the goal of conversion to various forms of biofuel. Switchgrass, a perennial grass native to North America, has been explored as an energy crop for many years. It is suitable because it does not require much agrotechnical input, is highly resistant to pest infestation and disease development, and can provide very high biomass yields. The aim of this work was to determine the biomass quality of the mentioned plant in relation to the autumn and spring harvest, considering its use in direct combustion processes. Significant differences were found in the percentages of ash, carbon, nitrogen, sulfur, oxygen, and water, as well as in the percentages of micro and macro elements, in the harvest dates studied. Compared to the autumn, the moisture content decreased from 33.88% to 10.95% and ash content from 4.59% to 3.1% in the spring harvest, while the carbon content increased from 47.02% to 47.49%, dry matter from 38.91% to 89.22%, and heating value from 18.60 MJ kg−1 to 18.73 MJ kg−1. Shifting the harvest date from autumn to spring resulted in the production of higher quality biomass for use in combustion processes.
The increasing amount of residual waste presents several opportunities to use biomass as a renewable energy source. Agricultural biomass is a raw material with a high ash content, which can be a problem in any form of energy conversion. To obtain better quality biofuel, excess mineral matter must be removed. Demineralization is a simple form of mixing and washing biomass with various liquids to reduce ash content. Water, acetic acid, hydrochloric acid and nitric acid are common solvents used for this purpose. Ash is composed of different micro (Zn, Cu, Fe) and macro elements (Mg, Ca, K), which can have different consequences for the use of biomass for thermal energy. Different solvents have different effects on the individual elements, with inorganic acids having the greatest effect in demineralization processes, with a reduction in ash content of up to 80% for corn and about 99% for soybeans.
Considerable efforts have been made to replace formaldehyde-containing adhesives in the manufacturing of wood products, particularly particleboard, with natural alternatives. One promising solution is the liquefaction of lignocellulosic materials such as wood using glycerol (C3H8O3) under sulfuric acid catalysis (H2SO4). The aim of this study was to investigate the chemical composition and properties of spruce and oak biomass after liquefaction and to evaluate its potential as a formaldehyde-free adhesive substitute. All samples were liquefied at 150 °C for 120 min in five different wood–glycerol ratios (1:1 to 1:5). The liquefaction percentage, the insoluble residue, the dry matter and the hydroxyl (OH) number were determined as characteristic values for the polymer properties of the liquefied samples. The results showed the liquefaction percentage was up to 90% for spruce and oak. The insoluble residue ranged from 10 to 29% for spruce and from 10 to 22% for oak, the dry matter ranged from 54 to 70% for spruce and from 51 to 62% for oak, while the highest xydroxyl number was 570 mg KOH/g for spruce and 839 mg KOH/g for oak. Based on these results, liquefied wood was shown to be an effective natural alternative to synthetic resins in particleboard adhesives and a way to reduce formaldehyde emissions. This research not only supports environmentally sustainable practices but also paves the way for various bioproducts derived from liquefied biomass and points to future avenues for innovation and development in this area.
In this study, the physical properties of two hazelnut species were investigated before and after drying at different temperatures and durations. The results showed that the physical properties of the hazelnut samples, including size, volume, density, weight, kernel mass, and shell mass, were significantly affected by temperature, duration, and their interactions. In addition, the moisture content of the samples decreased with increasing temperature and drying duration. The lowest value for the Istarski duguljasti variety was 5.36% (160 °C and 45 min), while the lowest value for Rimski okrugli was measured at 160 °C and 60 min (5.02%). Ash content was affected by both temperature and time, with the Istarski duguljasti variety having a minimum value of 0.84% at 120 °C and 60 min and Rimski okrugli a maximum value of 1.24% at 100 °C and 30 min. The variables of the ultimate analysis, such as nitrogen, carbon, sulfur, and hydrogen, increased with increasing temperature and time. The oxygen content and the higher heating value decreased with increasing temperature. Energy optimization in the drying process is crucial to reduce costs and save time. Effective energy optimization measures can lead to significant cost savings and improved operational efficiency in the drying process.
Agricultural biomass is one of the most important renewable energy sources. As a byproduct of corn, soybean and sunflower production, large amounts of biomass are produced that can be used as an energy source through conversion. In order to assess the quality and the possibility of the use of biomass, its composition and calorific value must be determined. The use of nonlinear models allows for an easier estimation of the energy properties of biomass concerning certain input and output parameters. In this paper, RFR (Random Forest Regression) and SVM (Support Vector Machine) models were developed to determine their capabilities in estimating the HHV (higher heating value) of biomass based on input parameters of ultimate analysis. The developed models showed good performance in terms of HHV estimation, confirmed by the coefficient of determination for the RFR (R2 = 0.79) and SVM (R2 = 0.93) models. The developed models have shown promising results in accurately predicting the HHV of biomass from various sources. The use of these algorithms for biomass energy prediction has the potential for further development.
Hazelnut fruit samples were collected over 2 years (2020 and 2021) and subjected to four different drying temperatures (100, 120, 140, and 160 °C) and four different drying times of 15, 30, 45, and 60 min using conduction drying. The analyses performed showed that conduction drying at different temperatures and different drying times had a significant effect on the change in the composition of the hazelnut shell fuel and its mass properties. Comparing the untreated samples over two years and the samples after drying, it can be seen that in 2020, the drying treatment causes a decrease in the percentage of C and H, while in 2021, drying at 160 °C and 45 min causes an increase in C and H values. After treatment, the S content decreased on average, while the value of O increased or remained the same. The greatest increase in heating values (HHV and LHV) was observed at temperatures of 140 °C and 120 °C and the duration of 45 min. When drying was applied, a significant difference in mass change was observed at 120 °C, 100 °C, and 140 °C and 30 and 60 min process durations. The change in heating value is significantly affected by the parameters year of sampling, temperature, and time, while the change in mass of the hazelnut shell is most affected by drying time.