The world's most developed countries and the European Union (EU) deem that the renewable energy sources should partly substitute fossil fuels and become a “bridge” to the utilization of other energy sources of the future. This paper will present the possibility of using pruned biomass from fruit cultivars. It will also present the calculation of potential energy from the mentioned raw materials in order to determine the extent of replacement of non-renewable sources with these types of renewable energy. One of the results of the intensive fruit-growing process, in post pruning stage, is large amount of pruned biomass waste. Based on the calculated biomass (kg ha-1) from intensively grown woody fruit crops that are most grown in Croatia (apple, pear, apricots, peach and nectarine, sweet cherry, sour cherry, prune, walnut, hazelnut, almond, fig, grapevine, and olive) and the analysis of combustible (carbon 45.55-49.28%, hydrogen 5.91-6.83%, and sulphur 0.18-0.21%) and non-combustible matters (oxygen 43.34-46.6%, nitrogen 0.54-1.05%, moisture 3.65-8.83%, ashes 1.52-5.39%) with impact of lowering the biomass heating value (15.602-17.727 MJ kg-1), the energy potential of the pruned fruit biomass is calculated at 4.21 PJ.

In this study, the natural dye was extracted from Spartium junceum L. (SJL) flowers and applied on cellulose (cotton) and protein (wool) fabric. Fabrics were pre-mordant with alum prior to the dyeing process. Considering the global requirements on zero waste and green policy, the dyeing process was intended to be as much as possible environmentally friendly but still effective. Therefore, mordant concentration was optimized due to the reduction of the negative impact. The efficiency of the dyeing process was investigated by examination of fabrics’ color characteristics and colorfastness to washing properties. In this paper, we have proved that the extracted dye from Spartium junceum L. is an acidic dye (mordant dye) which is more applicable for the treatment of wool fabrics. In this paper, it was proved that phytochemicals responsible for coloring are part of the flavonoids group. The UV absorption spectra of extracted dye show 4 bands in the region of λ_max 224, 268, 308 and 346 nm which are ascribed to bands characteristic for flavonoids. Wool fabric pre-mordant with 3% alum and dyed shows great chromatic (C*) properties where C* value is in a range from 47.76 for unwashed samples to 47.50 for samples after 5 washing cycles and color hue (h°) is in a range 82.13 for unwashed samples to 81.52 for samples after 5 washing cycles. The best result regarding the colorfastness properties is shown by the wool sample treated with 3% alum after 5 washing cycles (total difference in color (Delta E*) = 0.87). These results confirm that metal (Al) from alum mordant make strong chemical bonds with wool substrate and dye since Delta E* values decrease in comparison to Delta E* values of the cotton samples treated the same way. The results revealed it is possible to reduce the concentration of mordant up to 3% and obtain satisfactory results regarding the colorfastness. Nevertheless, future research will go in the direction of replacing synthetic mordant with a more environmentally friendly one.

Globally, lignocellulosic biomass has great potential for industrial production of materials and products, but this resource must be used in an environmentally friendly, socially acceptable and sustainable manner. Wood and agricultural residues such as walnut shells as lignocellulosic biomass are one of the most affordable and important renewable resources in the world, which can partially replace fossil resources. The overall objective of the research is to provide background information that supports new applications of walnut shells in a biorefinery context and to increase the economic value of these non-wood forest products. This paper presents the properties characterization of liquefied biomass according to their chemical composition. All results were compared to liquefied wood. In this study, the liquefaction properties of five different walnut shell particle sizes were determined using glycerol as the liquefaction reagent under defined reaction conditions. The liquefied biomass was characterized for properties such as percentage residue, degree of liquefaction, and hydroxyl OH numbers. The chemical composition of the same biomass was investigated for its influence on the liquefaction properties. Accordingly, the main objective of this study was to determine the liquefaction properties of different particle sizes as a function of their chemical composition, also in comparison with the chemical composition of wood. The study revealed that walnut shell biomass can be effectively liquefied into glycerol using H₂SO₄ as the catalyst, with liquefaction efficiency ranging from 89.21 to 90.98%.

Biomass obtained from cultivated energy crops is one of the raw materials with the highest potential in renewable energy production. Although such biomass can be used in production of lignocellulose bioethanol, it is currently mostly used as solid fuel for generating heat and/or electric energy via combustion processes. Calorific values, proximate and ultimate analysis, cell structure and micro- and macro-elements data are considered as basic parameters in the valorization of fuel properties during biomass combustion processes. Energy crops are cultivated with the aim to produce the largest possible quantity of biomass with minimal agro-technical inputs. One of these crops is Sida hermaphrodita (L.) Rusby. Given the fact that the chemical composition of biomass is influenced by a number of agro-ecological and agro-technical factors, the aim of this work was to determine the fuel properties of Sida hermaphrodita biomass obtained from three different harvest seasons (autumn, winter and spring) and cultivated in the area of the Republic of Croatia. On the basis of these investigations it was possible to conclude that harvest delaying towards spring season had a positive impact on suitability of using biomass of Sida hermaphrodita in the combustion process, which primarily means significant lowering the contents of moisture (18.64%), ash (1.94%), and nitrogen (0.65%), but also means increasing the contents of fixed carbon (6.21%) and lignin (25.45%).